7908 lines
272 KiB
C
7908 lines
272 KiB
C
/* $OpenBSD: if_iwxreg.h,v 1.51 2023/03/06 11:18:37 stsp Exp $ */
|
|
|
|
/*-
|
|
* Based on BSD-licensed source modules in the Linux iwlwifi driver,
|
|
* which were used as the reference documentation for this implementation.
|
|
*
|
|
******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2017 Intel Deutschland GmbH
|
|
* Copyright(c) 2018 - 2019 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2017 Intel Deutschland GmbH
|
|
* Copyright(c) 2018 - 2019 Intel Corporation
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
|
|
|
|
/* maximum number of DRAM map entries supported by FW */
|
|
#define IWX_MAX_DRAM_ENTRY 64
|
|
#define IWX_CSR_CTXT_INFO_BA 0x40
|
|
|
|
/**
|
|
* enum iwx_context_info_flags - Context information control flags
|
|
* @IWX_CTXT_INFO_AUTO_FUNC_INIT: If set, FW will not wait before interrupting
|
|
* the init done for driver command that configures several system modes
|
|
* @IWX_CTXT_INFO_EARLY_DEBUG: enable early debug
|
|
* @IWX_CTXT_INFO_ENABLE_CDMP: enable core dump
|
|
* @IWX_CTXT_INFO_RB_CB_SIZE_POS: position of the RBD Cyclic Buffer Size
|
|
* exponent, the actual size is 2**value, valid sizes are 8-2048.
|
|
* The value is four bits long. Maximum valid exponent is 12
|
|
* @IWX_CTXT_INFO_TFD_FORMAT_LONG: use long TFD Format (the
|
|
* default is short format - not supported by the driver)
|
|
* @IWX_CTXT_INFO_RB_SIZE_POS: RB size position
|
|
* (values are IWX_CTXT_INFO_RB_SIZE_*K)
|
|
* @IWX_CTXT_INFO_RB_SIZE_1K: Value for 1K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_2K: Value for 2K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_4K: Value for 4K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_8K: Value for 8K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_12K: Value for 12K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_16K: Value for 16K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_20K: Value for 20K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_24K: Value for 24K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_28K: Value for 28K RB size
|
|
* @IWX_CTXT_INFO_RB_SIZE_32K: Value for 32K RB size
|
|
*/
|
|
enum iwx_context_info_flags {
|
|
IWX_CTXT_INFO_AUTO_FUNC_INIT = (1 << 0),
|
|
IWX_CTXT_INFO_EARLY_DEBUG = (1 << 1),
|
|
IWX_CTXT_INFO_ENABLE_CDMP = (1 << 2),
|
|
IWX_CTXT_INFO_RB_CB_SIZE_POS = 4,
|
|
IWX_CTXT_INFO_TFD_FORMAT_LONG = (1 << 8),
|
|
IWX_CTXT_INFO_RB_SIZE_POS = 9,
|
|
IWX_CTXT_INFO_RB_SIZE_1K = 0x1,
|
|
IWX_CTXT_INFO_RB_SIZE_2K = 0x2,
|
|
IWX_CTXT_INFO_RB_SIZE_4K = 0x4,
|
|
IWX_CTXT_INFO_RB_SIZE_8K = 0x8,
|
|
IWX_CTXT_INFO_RB_SIZE_12K = 0x9,
|
|
IWX_CTXT_INFO_RB_SIZE_16K = 0xa,
|
|
IWX_CTXT_INFO_RB_SIZE_20K = 0xb,
|
|
IWX_CTXT_INFO_RB_SIZE_24K = 0xc,
|
|
IWX_CTXT_INFO_RB_SIZE_28K = 0xd,
|
|
IWX_CTXT_INFO_RB_SIZE_32K = 0xe,
|
|
};
|
|
|
|
/*
|
|
* struct iwx_context_info_version - version structure
|
|
* @mac_id: SKU and revision id
|
|
* @version: context information version id
|
|
* @size: the size of the context information in DWs
|
|
*/
|
|
struct iwx_context_info_version {
|
|
uint16_t mac_id;
|
|
uint16_t version;
|
|
uint16_t size;
|
|
uint16_t reserved;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_control - version structure
|
|
* @control_flags: context information flags see &enum iwx_context_info_flags
|
|
*/
|
|
struct iwx_context_info_control {
|
|
uint32_t control_flags;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_dram - images DRAM map
|
|
* each entry in the map represents a DRAM chunk of up to 32 KB
|
|
* @umac_img: UMAC image DRAM map
|
|
* @lmac_img: LMAC image DRAM map
|
|
* @virtual_img: paged image DRAM map
|
|
*/
|
|
struct iwx_context_info_dram {
|
|
uint64_t umac_img[IWX_MAX_DRAM_ENTRY];
|
|
uint64_t lmac_img[IWX_MAX_DRAM_ENTRY];
|
|
uint64_t virtual_img[IWX_MAX_DRAM_ENTRY];
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_rbd_cfg - RBDs configuration
|
|
* @free_rbd_addr: default queue free RB CB base address
|
|
* @used_rbd_addr: default queue used RB CB base address
|
|
* @status_wr_ptr: default queue used RB status write pointer
|
|
*/
|
|
struct iwx_context_info_rbd_cfg {
|
|
uint64_t free_rbd_addr;
|
|
uint64_t used_rbd_addr;
|
|
uint64_t status_wr_ptr;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_hcmd_cfg - command queue configuration
|
|
* @cmd_queue_addr: address of command queue
|
|
* @cmd_queue_size: number of entries
|
|
*/
|
|
struct iwx_context_info_hcmd_cfg {
|
|
uint64_t cmd_queue_addr;
|
|
uint8_t cmd_queue_size;
|
|
uint8_t reserved[7];
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_dump_cfg - Core Dump configuration
|
|
* @core_dump_addr: core dump (debug DRAM address) start address
|
|
* @core_dump_size: size, in DWs
|
|
*/
|
|
struct iwx_context_info_dump_cfg {
|
|
uint64_t core_dump_addr;
|
|
uint32_t core_dump_size;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_pnvm_cfg - platform NVM data configuration
|
|
* @platform_nvm_addr: Platform NVM data start address
|
|
* @platform_nvm_size: size in DWs
|
|
*/
|
|
struct iwx_context_info_pnvm_cfg {
|
|
uint64_t platform_nvm_addr;
|
|
uint32_t platform_nvm_size;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info_early_dbg_cfg - early debug configuration for
|
|
* dumping DRAM addresses
|
|
* @early_debug_addr: early debug start address
|
|
* @early_debug_size: size in DWs
|
|
*/
|
|
struct iwx_context_info_early_dbg_cfg {
|
|
uint64_t early_debug_addr;
|
|
uint32_t early_debug_size;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_context_info - device INIT configuration
|
|
* @version: version information of context info and HW
|
|
* @control: control flags of FH configurations
|
|
* @rbd_cfg: default RX queue configuration
|
|
* @hcmd_cfg: command queue configuration
|
|
* @dump_cfg: core dump data
|
|
* @edbg_cfg: early debug configuration
|
|
* @pnvm_cfg: platform nvm configuration
|
|
* @dram: firmware image addresses in DRAM
|
|
*/
|
|
struct iwx_context_info {
|
|
struct iwx_context_info_version version;
|
|
struct iwx_context_info_control control;
|
|
uint64_t reserved0;
|
|
struct iwx_context_info_rbd_cfg rbd_cfg;
|
|
struct iwx_context_info_hcmd_cfg hcmd_cfg;
|
|
uint32_t reserved1[4];
|
|
struct iwx_context_info_dump_cfg dump_cfg;
|
|
struct iwx_context_info_early_dbg_cfg edbg_cfg;
|
|
struct iwx_context_info_pnvm_cfg pnvm_cfg;
|
|
uint32_t reserved2[16];
|
|
struct iwx_context_info_dram dram;
|
|
uint32_t reserved3[16];
|
|
} __packed;
|
|
|
|
|
|
/*
|
|
* Context info definitions for AX210 devices.
|
|
*/
|
|
|
|
#define IWX_CSR_CTXT_INFO_BOOT_CTRL 0x0
|
|
#define IWX_CSR_CTXT_INFO_ADDR 0x118
|
|
#define IWX_CSR_IML_DATA_ADDR 0x120
|
|
#define IWX_CSR_IML_SIZE_ADDR 0x128
|
|
#define IWX_CSR_IML_RESP_ADDR 0x12c
|
|
|
|
/* Set bit for enabling automatic function boot */
|
|
#define IWX_CSR_AUTO_FUNC_BOOT_ENA (1 << 1)
|
|
/* Set bit for initiating function boot */
|
|
#define IWX_CSR_AUTO_FUNC_INIT (1 << 7)
|
|
|
|
/**
|
|
* iwx_prph_scratch_mtr_format - tfd size configuration
|
|
* @IWX_PRPH_MTR_FORMAT_16B: 16 bit tfd
|
|
* @IWX_PRPH_MTR_FORMAT_32B: 32 bit tfd
|
|
* @IWX_PRPH_MTR_FORMAT_64B: 64 bit tfd
|
|
* @IWX_PRPH_MTR_FORMAT_256B: 256 bit tfd
|
|
*/
|
|
#define IWX_PRPH_MTR_FORMAT_16B 0x0
|
|
#define IWX_PRPH_MTR_FORMAT_32B 0x40000
|
|
#define IWX_PRPH_MTR_FORMAT_64B 0x80000
|
|
#define IWX_PRPH_MTR_FORMAT_256B 0xC0000
|
|
|
|
/**
|
|
* iwx_prph_scratch_flags - PRPH scratch control flags
|
|
* @IWX_PRPH_SCRATCH_IMR_DEBUG_EN: IMR support for debug
|
|
* @IWX_PRPH_SCRATCH_EARLY_DEBUG_EN: enable early debug conf
|
|
* @IWX_PRPH_SCRATCH_EDBG_DEST_DRAM: use DRAM, with size allocated
|
|
* in hwm config.
|
|
* @IWX_PRPH_SCRATCH_EDBG_DEST_INTERNAL: use buffer on SRAM
|
|
* @IWX_PRPH_SCRATCH_EDBG_DEST_ST_ARBITER: use st arbiter, mainly for
|
|
* multicomm.
|
|
* @IWX_PRPH_SCRATCH_EDBG_DEST_TB22DTF: route debug data to SoC HW
|
|
* @IWX_PRPH_SCTATCH_RB_SIZE_4K: Use 4K RB size (the default is 2K)
|
|
* @IWX_PRPH_SCRATCH_MTR_MODE: format used for completion - 0: for
|
|
* completion descriptor, 1 for responses (legacy)
|
|
* @IWX_PRPH_SCRATCH_MTR_FORMAT: a mask for the size of the tfd.
|
|
* There are 4 optional values: 0: 16 bit, 1: 32 bit, 2: 64 bit,
|
|
* 3: 256 bit.
|
|
* @IWX_PRPH_SCRATCH_RB_SIZE_EXT_MASK: RB size full information, ignored
|
|
* by older firmware versions, so set IWX_PRPH_SCRATCH_RB_SIZE_4K
|
|
* appropriately; use the below values for this.
|
|
* @IWX_PRPH_SCRATCH_RB_SIZE_EXT_8K: 8kB RB size
|
|
* @IWX_PRPH_SCRATCH_RB_SIZE_EXT_12K: 12kB RB size
|
|
* @IWX_PRPH_SCRATCH_RB_SIZE_EXT_16K: 16kB RB size
|
|
*/
|
|
#define IWX_PRPH_SCRATCH_IMR_DEBUG_EN (1 << 1)
|
|
#define IWX_PRPH_SCRATCH_EARLY_DEBUG_EN (1 << 4)
|
|
#define IWX_PRPH_SCRATCH_EDBG_DEST_DRAM (1 << 8)
|
|
#define IWX_PRPH_SCRATCH_EDBG_DEST_INTERNAL (1 << 9)
|
|
#define IWX_PRPH_SCRATCH_EDBG_DEST_ST_ARBITER (1 << 10)
|
|
#define IWX_PRPH_SCRATCH_EDBG_DEST_TB22DTF (1 << 11)
|
|
#define IWX_PRPH_SCRATCH_RB_SIZE_4K (1 << 16)
|
|
#define IWX_PRPH_SCRATCH_MTR_MODE (1 << 17)
|
|
#define IWX_PRPH_SCRATCH_MTR_FORMAT ((1 << 18) | (1 << 19))
|
|
#define IWX_PRPH_SCRATCH_RB_SIZE_EXT_MASK (0xf << 20)
|
|
#define IWX_PRPH_SCRATCH_RB_SIZE_EXT_8K (8 << 20)
|
|
#define IWX_PRPH_SCRATCH_RB_SIZE_EXT_12K (9 << 20)
|
|
#define IWX_PRPH_SCRATCH_RB_SIZE_EXT_16K (10 << 20)
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_version - version structure
|
|
* @mac_id: SKU and revision id
|
|
* @version: prph scratch information version id
|
|
* @size: the size of the context information in DWs
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_scratch_version {
|
|
uint16_t mac_id;
|
|
uint16_t version;
|
|
uint16_t size;
|
|
uint16_t reserved;
|
|
} __packed; /* PERIPH_SCRATCH_VERSION_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_control - control structure
|
|
* @control_flags: context information flags see &iwx_prph_scratch_flags
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_scratch_control {
|
|
uint32_t control_flags;
|
|
uint32_t reserved;
|
|
} __packed; /* PERIPH_SCRATCH_CONTROL_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_pnvm_cfg - ror config
|
|
* @pnvm_base_addr: PNVM start address
|
|
* @pnvm_size: PNVM size in DWs
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_scratch_pnvm_cfg {
|
|
uint64_t pnvm_base_addr;
|
|
uint32_t pnvm_size;
|
|
uint32_t reserved;
|
|
} __packed; /* PERIPH_SCRATCH_PNVM_CFG_S */
|
|
|
|
struct iwx_pnvm_section {
|
|
uint32_t offset;
|
|
const uint8_t data[];
|
|
} __packed;
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_hwm_cfg - hwm config
|
|
* @hwm_base_addr: hwm start address
|
|
* @hwm_size: hwm size in DWs
|
|
* @debug_token_config: debug preset
|
|
*/
|
|
struct iwx_prph_scratch_hwm_cfg {
|
|
uint64_t hwm_base_addr;
|
|
uint32_t hwm_size;
|
|
uint32_t debug_token_config;
|
|
} __packed; /* PERIPH_SCRATCH_HWM_CFG_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_rbd_cfg - RBDs configuration
|
|
* @free_rbd_addr: default queue free RB CB base address
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_scratch_rbd_cfg {
|
|
uint64_t free_rbd_addr;
|
|
uint32_t reserved;
|
|
} __packed; /* PERIPH_SCRATCH_RBD_CFG_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_uefi_cfg - prph scratch reduce power table
|
|
* @base_addr: reduce power table address
|
|
* @size: table size in dwords
|
|
*/
|
|
struct iwx_prph_scratch_uefi_cfg {
|
|
uint64_t base_addr;
|
|
uint32_t size;
|
|
uint32_t reserved;
|
|
} __packed; /* PERIPH_SCRATCH_UEFI_CFG_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch_ctrl_cfg - prph scratch ctrl and config
|
|
* @version: version information of context info and HW
|
|
* @control: control flags of FH configurations
|
|
* @pnvm_cfg: ror configuration
|
|
* @hwm_cfg: hwm configuration
|
|
* @rbd_cfg: default RX queue configuration
|
|
*/
|
|
struct iwx_prph_scratch_ctrl_cfg {
|
|
struct iwx_prph_scratch_version version;
|
|
struct iwx_prph_scratch_control control;
|
|
struct iwx_prph_scratch_pnvm_cfg pnvm_cfg;
|
|
struct iwx_prph_scratch_hwm_cfg hwm_cfg;
|
|
struct iwx_prph_scratch_rbd_cfg rbd_cfg;
|
|
struct iwx_prph_scratch_uefi_cfg reduce_power_cfg;
|
|
} __packed; /* PERIPH_SCRATCH_CTRL_CFG_S */
|
|
|
|
/*
|
|
* struct iwx_prph_scratch - peripheral scratch mapping
|
|
* @ctrl_cfg: control and configuration of prph scratch
|
|
* @dram: firmware images addresses in DRAM
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_scratch {
|
|
struct iwx_prph_scratch_ctrl_cfg ctrl_cfg;
|
|
uint32_t reserved[12];
|
|
struct iwx_context_info_dram dram;
|
|
} __packed; /* PERIPH_SCRATCH_S */
|
|
|
|
/*
|
|
* struct iwx_prph_info - peripheral information
|
|
* @boot_stage_mirror: reflects the value in the Boot Stage CSR register
|
|
* @ipc_status_mirror: reflects the value in the IPC Status CSR register
|
|
* @sleep_notif: indicates the peripheral sleep status
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_prph_info {
|
|
uint32_t boot_stage_mirror;
|
|
uint32_t ipc_status_mirror;
|
|
uint32_t sleep_notif;
|
|
uint32_t reserved;
|
|
} __packed; /* PERIPH_INFO_S */
|
|
|
|
/*
|
|
* struct iwx_context_info_gen3 - device INIT configuration
|
|
* @version: version of the context information
|
|
* @size: size of context information in DWs
|
|
* @config: context in which the peripheral would execute - a subset of
|
|
* capability csr register published by the peripheral
|
|
* @prph_info_base_addr: the peripheral information structure start address
|
|
* @cr_head_idx_arr_base_addr: the completion ring head index array
|
|
* start address
|
|
* @tr_tail_idx_arr_base_addr: the transfer ring tail index array
|
|
* start address
|
|
* @cr_tail_idx_arr_base_addr: the completion ring tail index array
|
|
* start address
|
|
* @tr_head_idx_arr_base_addr: the transfer ring head index array
|
|
* start address
|
|
* @cr_idx_arr_size: number of entries in the completion ring index array
|
|
* @tr_idx_arr_size: number of entries in the transfer ring index array
|
|
* @mtr_base_addr: the message transfer ring start address
|
|
* @mcr_base_addr: the message completion ring start address
|
|
* @mtr_size: number of entries which the message transfer ring can hold
|
|
* @mcr_size: number of entries which the message completion ring can hold
|
|
* @mtr_doorbell_vec: the doorbell vector associated with the message
|
|
* transfer ring
|
|
* @mcr_doorbell_vec: the doorbell vector associated with the message
|
|
* completion ring
|
|
* @mtr_msi_vec: the MSI which shall be generated by the peripheral after
|
|
* completing a transfer descriptor in the message transfer ring
|
|
* @mcr_msi_vec: the MSI which shall be generated by the peripheral after
|
|
* completing a completion descriptor in the message completion ring
|
|
* @mtr_opt_header_size: the size of the optional header in the transfer
|
|
* descriptor associated with the message transfer ring in DWs
|
|
* @mtr_opt_footer_size: the size of the optional footer in the transfer
|
|
* descriptor associated with the message transfer ring in DWs
|
|
* @mcr_opt_header_size: the size of the optional header in the completion
|
|
* descriptor associated with the message completion ring in DWs
|
|
* @mcr_opt_footer_size: the size of the optional footer in the completion
|
|
* descriptor associated with the message completion ring in DWs
|
|
* @msg_rings_ctrl_flags: message rings control flags
|
|
* @prph_info_msi_vec: the MSI which shall be generated by the peripheral
|
|
* after updating the Peripheral Information structure
|
|
* @prph_scratch_base_addr: the peripheral scratch structure start address
|
|
* @prph_scratch_size: the size of the peripheral scratch structure in DWs
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_context_info_gen3 {
|
|
uint16_t version;
|
|
uint16_t size;
|
|
uint32_t config;
|
|
uint64_t prph_info_base_addr;
|
|
uint64_t cr_head_idx_arr_base_addr;
|
|
uint64_t tr_tail_idx_arr_base_addr;
|
|
uint64_t cr_tail_idx_arr_base_addr;
|
|
uint64_t tr_head_idx_arr_base_addr;
|
|
uint16_t cr_idx_arr_size;
|
|
uint16_t tr_idx_arr_size;
|
|
uint64_t mtr_base_addr;
|
|
uint64_t mcr_base_addr;
|
|
uint16_t mtr_size;
|
|
uint16_t mcr_size;
|
|
uint16_t mtr_doorbell_vec;
|
|
uint16_t mcr_doorbell_vec;
|
|
uint16_t mtr_msi_vec;
|
|
uint16_t mcr_msi_vec;
|
|
uint8_t mtr_opt_header_size;
|
|
uint8_t mtr_opt_footer_size;
|
|
uint8_t mcr_opt_header_size;
|
|
uint8_t mcr_opt_footer_size;
|
|
uint16_t msg_rings_ctrl_flags;
|
|
uint16_t prph_info_msi_vec;
|
|
uint64_t prph_scratch_base_addr;
|
|
uint32_t prph_scratch_size;
|
|
uint32_t reserved;
|
|
} __packed; /* IPC_CONTEXT_INFO_S */
|
|
|
|
#define IWX_MGMT_TID 15
|
|
|
|
#define IWX_MQ_RX_TABLE_SIZE 512
|
|
|
|
/* cb size is the exponent */
|
|
#define IWX_RX_QUEUE_CB_SIZE(x) ((sizeof(x) <= 4) ? (fls(x) - 1) : (flsl(x) - 1))
|
|
|
|
/*
|
|
* CSR (control and status registers)
|
|
*
|
|
* CSR registers are mapped directly into PCI bus space, and are accessible
|
|
* whenever platform supplies power to device, even when device is in
|
|
* low power states due to driver-invoked device resets
|
|
* (e.g. IWX_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
|
|
*
|
|
* Use iwl_write32() and iwl_read32() family to access these registers;
|
|
* these provide simple PCI bus access, without waking up the MAC.
|
|
* Do not use iwl_write_direct32() family for these registers;
|
|
* no need to "grab nic access" via IWX_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
|
|
* The MAC (uCode processor, etc.) does not need to be powered up for accessing
|
|
* the CSR registers.
|
|
*
|
|
* NOTE: Device does need to be awake in order to read this memory
|
|
* via IWX_CSR_EEPROM and IWX_CSR_OTP registers
|
|
*/
|
|
#define IWX_CSR_HW_IF_CONFIG_REG (0x000) /* hardware interface config */
|
|
#define IWX_CSR_INT_COALESCING (0x004) /* accum ints, 32-usec units */
|
|
#define IWX_CSR_INT (0x008) /* host interrupt status/ack */
|
|
#define IWX_CSR_INT_MASK (0x00c) /* host interrupt enable */
|
|
#define IWX_CSR_FH_INT_STATUS (0x010) /* busmaster int status/ack*/
|
|
#define IWX_CSR_GPIO_IN (0x018) /* read external chip pins */
|
|
#define IWX_CSR_RESET (0x020) /* busmaster enable, NMI, etc*/
|
|
#define IWX_CSR_GP_CNTRL (0x024)
|
|
|
|
/* 2nd byte of IWX_CSR_INT_COALESCING, not accessible via iwl_write32()! */
|
|
#define IWX_CSR_INT_PERIODIC_REG (0x005)
|
|
|
|
/*
|
|
* Hardware revision info
|
|
* Bit fields:
|
|
* 31-16: Reserved
|
|
* 15-4: Type of device: see IWX_CSR_HW_REV_TYPE_xxx definitions
|
|
* 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
|
|
* 1-0: "Dash" (-) value, as in A-1, etc.
|
|
*/
|
|
#define IWX_CSR_HW_REV (0x028)
|
|
|
|
/*
|
|
* RF ID revision info
|
|
* Bit fields:
|
|
* 31:24: Reserved (set to 0x0)
|
|
* 23:12: Type
|
|
* 11:8: Step (A - 0x0, B - 0x1, etc)
|
|
* 7:4: Dash
|
|
* 3:0: Flavor
|
|
*/
|
|
#define IWX_CSR_HW_RF_ID (0x09c)
|
|
|
|
|
|
#define IWX_CSR_GIO_REG (0x03C)
|
|
|
|
/*
|
|
* UCODE-DRIVER GP (general purpose) mailbox registers.
|
|
* SET/CLR registers set/clear bit(s) if "1" is written.
|
|
*/
|
|
#define IWX_CSR_UCODE_DRV_GP1 (0x054)
|
|
#define IWX_CSR_UCODE_DRV_GP1_SET (0x058)
|
|
#define IWX_CSR_UCODE_DRV_GP1_CLR (0x05c)
|
|
#define IWX_CSR_UCODE_DRV_GP2 (0x060)
|
|
|
|
#define IWX_CSR_MBOX_SET_REG (0x088)
|
|
#define IWX_CSR_MBOX_SET_REG_OS_ALIVE 0x20
|
|
|
|
#define IWX_CSR_DRAM_INT_TBL_REG (0x0A0)
|
|
#define IWX_CSR_MAC_SHADOW_REG_CTRL (0x0A8) /* 6000 and up */
|
|
|
|
/* LTR control */
|
|
#define IWX_CSR_LTR_LONG_VAL_AD (0x0d4)
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_NO_SNOOP_REQ 0x80000000
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE_MASK 0x1c000000
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE_SHIFT 24
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL_MASK 0x03ff0000
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL_SHIFT 16
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_SNOOP_REQ 0x00008000
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_SNOOP_SCALE_MASK 0x00001c00
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_SNOOP_SCALE_SHIFT 8
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_SNOOP_VAL 0x000003ff
|
|
#define IWX_CSR_LTR_LONG_VAL_AD_SCALE_USEC 2
|
|
|
|
/* GIO Chicken Bits (PCI Express bus link power management) */
|
|
#define IWX_CSR_GIO_CHICKEN_BITS (0x100)
|
|
|
|
#define IWX_CSR_DBG_HPET_MEM_REG (0x240)
|
|
#define IWX_CSR_DBG_LINK_PWR_MGMT_REG (0x250)
|
|
|
|
/* Bits for IWX_CSR_HW_IF_CONFIG_REG */
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000)
|
|
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14)
|
|
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_ENABLE_PME (0x10000000)
|
|
#define IWX_CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */
|
|
|
|
#define IWX_CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/
|
|
#define IWX_CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/
|
|
|
|
/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
|
|
* acknowledged (reset) by host writing "1" to flagged bits. */
|
|
#define IWX_CSR_INT_BIT_FH_RX (1U << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
|
|
#define IWX_CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
|
|
#define IWX_CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */
|
|
#define IWX_CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
|
|
#define IWX_CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
|
|
#define IWX_CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
|
|
#define IWX_CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
|
|
#define IWX_CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
|
|
#define IWX_CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */
|
|
#define IWX_CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
|
|
#define IWX_CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
|
|
|
|
#define IWX_CSR_INI_SET_MASK (IWX_CSR_INT_BIT_FH_RX | \
|
|
IWX_CSR_INT_BIT_HW_ERR | \
|
|
IWX_CSR_INT_BIT_FH_TX | \
|
|
IWX_CSR_INT_BIT_SW_ERR | \
|
|
IWX_CSR_INT_BIT_RF_KILL | \
|
|
IWX_CSR_INT_BIT_SW_RX | \
|
|
IWX_CSR_INT_BIT_WAKEUP | \
|
|
IWX_CSR_INT_BIT_ALIVE | \
|
|
IWX_CSR_INT_BIT_RX_PERIODIC)
|
|
|
|
/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
|
|
#define IWX_CSR_FH_INT_BIT_ERR (1U << 31) /* Error */
|
|
#define IWX_CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
|
|
#define IWX_CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
|
|
#define IWX_CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
|
|
#define IWX_CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
|
|
#define IWX_CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
|
|
|
|
#define IWX_CSR_FH_INT_RX_MASK (IWX_CSR_FH_INT_BIT_HI_PRIOR | \
|
|
IWX_CSR_FH_INT_BIT_RX_CHNL1 | \
|
|
IWX_CSR_FH_INT_BIT_RX_CHNL0)
|
|
|
|
#define IWX_CSR_FH_INT_TX_MASK (IWX_CSR_FH_INT_BIT_TX_CHNL1 | \
|
|
IWX_CSR_FH_INT_BIT_TX_CHNL0)
|
|
|
|
/**
|
|
* struct iwx_rx_transfer_desc - transfer descriptor AX210
|
|
* @addr: ptr to free buffer start address
|
|
* @rbid: unique tag of the buffer
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_rx_transfer_desc {
|
|
uint16_t rbid;
|
|
uint16_t reserved[3];
|
|
uint64_t addr;
|
|
};
|
|
|
|
#define IWX_RX_CD_FLAGS_FRAGMENTED (1 << 0)
|
|
|
|
/**
|
|
* struct iwx_rx_completion_desc - completion descriptor AX210
|
|
* @reserved1: reserved
|
|
* @rbid: unique tag of the received buffer
|
|
* @flags: flags (0: fragmented, all others: reserved)
|
|
* @reserved2: reserved
|
|
*/
|
|
struct iwx_rx_completion_desc {
|
|
uint32_t reserved1;
|
|
uint16_t rbid;
|
|
uint8_t flags;
|
|
uint8_t reserved2[25];
|
|
};
|
|
|
|
/* RESET */
|
|
#define IWX_CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
|
|
#define IWX_CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
|
|
#define IWX_CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
|
|
#define IWX_CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
|
|
#define IWX_CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
|
|
#define IWX_CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
|
|
|
|
/*
|
|
* GP (general purpose) CONTROL REGISTER
|
|
* Bit fields:
|
|
* 27: HW_RF_KILL_SW
|
|
* Indicates state of (platform's) hardware RF-Kill switch
|
|
* 26-24: POWER_SAVE_TYPE
|
|
* Indicates current power-saving mode:
|
|
* 000 -- No power saving
|
|
* 001 -- MAC power-down
|
|
* 010 -- PHY (radio) power-down
|
|
* 011 -- Error
|
|
* 9-6: SYS_CONFIG
|
|
* Indicates current system configuration, reflecting pins on chip
|
|
* as forced high/low by device circuit board.
|
|
* 4: GOING_TO_SLEEP
|
|
* Indicates MAC is entering a power-saving sleep power-down.
|
|
* Not a good time to access device-internal resources.
|
|
* 3: MAC_ACCESS_REQ
|
|
* Host sets this to request and maintain MAC wakeup, to allow host
|
|
* access to device-internal resources. Host must wait for
|
|
* MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
|
|
* device registers.
|
|
* 2: INIT_DONE
|
|
* Host sets this to put device into fully operational D0 power mode.
|
|
* Host resets this after SW_RESET to put device into low power mode.
|
|
* 0: MAC_CLOCK_READY
|
|
* Indicates MAC (ucode processor, etc.) is powered up and can run.
|
|
* Internal resources are accessible.
|
|
* NOTE: This does not indicate that the processor is actually running.
|
|
* NOTE: This does not indicate that device has completed
|
|
* init or post-power-down restore of internal SRAM memory.
|
|
* Use IWX_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
|
|
* SRAM is restored and uCode is in normal operation mode.
|
|
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
|
|
* do not need to save/restore it.
|
|
* NOTE: After device reset, this bit remains "0" until host sets
|
|
* INIT_DONE
|
|
*/
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
|
|
|
|
#define IWX_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
|
|
|
|
#define IWX_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN (0x04000000)
|
|
#define IWX_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
|
|
|
|
|
|
/* HW REV */
|
|
#define IWX_CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0)
|
|
#define IWX_CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2)
|
|
#define IWX_CSR_HW_REV_TYPE(_val) (((_val) & 0x000FFF0) >> 4)
|
|
|
|
#define IWX_CSR_HW_REV_TYPE_MSK (0x000FFF0)
|
|
#define IWX_CSR_HW_REV_TYPE_QU_B0 (0x0000334)
|
|
#define IWX_CSR_HW_REV_TYPE_QU_C0 (0x0000338)
|
|
#define IWX_CSR_HW_REV_TYPE_QUZ (0x0000354)
|
|
#define IWX_CSR_HW_REV_TYPE_SO (0x0000370)
|
|
#define IWX_CSR_HW_REV_TYPE_TY (0x0000420)
|
|
|
|
/* HW RFID */
|
|
#define IWX_CSR_HW_RFID_FLAVOR(_val) (((_val) & 0x000000F) >> 0)
|
|
#define IWX_CSR_HW_RFID_DASH(_val) (((_val) & 0x00000F0) >> 4)
|
|
#define IWX_CSR_HW_RFID_STEP(_val) (((_val) & 0x0000F00) >> 8)
|
|
#define IWX_CSR_HW_RFID_TYPE(_val) (((_val) & 0x0FFF000) >> 12)
|
|
#define IWX_CSR_HW_RFID_IS_CDB(_val) (((_val) & 0x10000000) >> 28)
|
|
#define IWX_CSR_HW_RFID_IS_JACKET(_val) (((_val) & 0x20000000) >> 29)
|
|
|
|
/* CSR GIO */
|
|
#define IWX_CSR_GIO_REG_VAL_L0S_DISABLED (0x00000002)
|
|
|
|
/*
|
|
* UCODE-DRIVER GP (general purpose) mailbox register 1
|
|
* Host driver and uCode write and/or read this register to communicate with
|
|
* each other.
|
|
* Bit fields:
|
|
* 4: UCODE_DISABLE
|
|
* Host sets this to request permanent halt of uCode, same as
|
|
* sending CARD_STATE command with "halt" bit set.
|
|
* 3: CT_KILL_EXIT
|
|
* Host sets this to request exit from CT_KILL state, i.e. host thinks
|
|
* device temperature is low enough to continue normal operation.
|
|
* 2: CMD_BLOCKED
|
|
* Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
|
|
* to release uCode to clear all Tx and command queues, enter
|
|
* unassociated mode, and power down.
|
|
* NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit.
|
|
* 1: SW_BIT_RFKILL
|
|
* Host sets this when issuing CARD_STATE command to request
|
|
* device sleep.
|
|
* 0: MAC_SLEEP
|
|
* uCode sets this when preparing a power-saving power-down.
|
|
* uCode resets this when power-up is complete and SRAM is sane.
|
|
* NOTE: device saves internal SRAM data to host when powering down,
|
|
* and must restore this data after powering back up.
|
|
* MAC_SLEEP is the best indication that restore is complete.
|
|
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
|
|
* do not need to save/restore it.
|
|
*/
|
|
#define IWX_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
|
|
#define IWX_CSR_UCODE_SW_BIT_RFKILL (0x00000002)
|
|
#define IWX_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
|
|
#define IWX_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
|
|
#define IWX_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020)
|
|
|
|
/* GIO Chicken Bits (PCI Express bus link power management) */
|
|
#define IWX_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
|
|
#define IWX_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
|
|
|
|
/* HPET MEM debug */
|
|
#define IWX_CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
|
|
|
|
/* DRAM INT TABLE */
|
|
#define IWX_CSR_DRAM_INT_TBL_ENABLE (1U << 31)
|
|
#define IWX_CSR_DRAM_INIT_TBL_WRITE_POINTER (1 << 28)
|
|
#define IWX_CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
|
|
|
|
/* 22000 configuration registers */
|
|
|
|
/*
|
|
* TFH Configuration register.
|
|
*
|
|
* BIT fields:
|
|
*
|
|
* Bits 3:0:
|
|
* Define the maximum number of pending read requests.
|
|
* Maximum configuration value allowed is 0xC
|
|
* Bits 9:8:
|
|
* Define the maximum transfer size. (64 / 128 / 256)
|
|
* Bit 10:
|
|
* When bit is set and transfer size is set to 128B, the TFH will enable
|
|
* reading chunks of more than 64B only if the read address is aligned to 128B.
|
|
* In case of DRAM read address which is not aligned to 128B, the TFH will
|
|
* enable transfer size which doesn't cross 64B DRAM address boundary.
|
|
*/
|
|
#define IWX_TFH_TRANSFER_MODE (0x1F40)
|
|
#define IWX_TFH_TRANSFER_MAX_PENDING_REQ 0xc
|
|
#define IWX_TFH_CHUNK_SIZE_128 (1 << 8)
|
|
#define IWX_TFH_CHUNK_SPLIT_MODE (1 << 10)
|
|
|
|
/*
|
|
* Defines the offset address in dwords referring from the beginning of the
|
|
* Tx CMD which will be updated in DRAM.
|
|
* Note that the TFH offset address for Tx CMD update is always referring to
|
|
* the start of the TFD first TB.
|
|
* In case of a DRAM Tx CMD update the TFH will update PN and Key ID
|
|
*/
|
|
#define IWX_TFH_TXCMD_UPDATE_CFG (0x1F48)
|
|
|
|
/*
|
|
* Controls TX DMA operation
|
|
*
|
|
* BIT fields:
|
|
*
|
|
* Bits 31:30: Enable the SRAM DMA channel.
|
|
* Turning on bit 31 will kick the SRAM2DRAM DMA.
|
|
* Note that the sram2dram may be enabled only after configuring the DRAM and
|
|
* SRAM addresses registers and the byte count register.
|
|
* Bits 25:24: Defines the interrupt target upon dram2sram transfer done. When
|
|
* set to 1 - interrupt is sent to the driver
|
|
* Bit 0: Indicates the snoop configuration
|
|
*/
|
|
#define IWX_TFH_SRV_DMA_CHNL0_CTRL (0x1F60)
|
|
#define IWX_TFH_SRV_DMA_SNOOP (1 << 0)
|
|
#define IWX_TFH_SRV_DMA_TO_DRIVER (1 << 24)
|
|
#define IWX_TFH_SRV_DMA_START (1U << 31)
|
|
|
|
/* Defines the DMA SRAM write start address to transfer a data block */
|
|
#define IWX_TFH_SRV_DMA_CHNL0_SRAM_ADDR (0x1F64)
|
|
|
|
/* Defines the 64bits DRAM start address to read the DMA data block from */
|
|
#define IWX_TFH_SRV_DMA_CHNL0_DRAM_ADDR (0x1F68)
|
|
|
|
/*
|
|
* Defines the number of bytes to transfer from DRAM to SRAM.
|
|
* Note that this register may be configured with non-dword aligned size.
|
|
*/
|
|
#define IWX_TFH_SRV_DMA_CHNL0_BC (0x1F70)
|
|
|
|
/* 9000 rx series registers */
|
|
|
|
#define IWX_RFH_Q0_FRBDCB_BA_LSB 0xA08000 /* 64 bit address */
|
|
#define IWX_RFH_Q_FRBDCB_BA_LSB(q) (IWX_RFH_Q0_FRBDCB_BA_LSB + (q) * 8)
|
|
/* Write index table */
|
|
#define IWX_RFH_Q0_FRBDCB_WIDX 0xA08080
|
|
#define IWX_RFH_Q_FRBDCB_WIDX(q) (IWX_RFH_Q0_FRBDCB_WIDX + (q) * 4)
|
|
/* Write index table - shadow registers */
|
|
#define IWX_RFH_Q0_FRBDCB_WIDX_TRG 0x1C80
|
|
#define IWX_RFH_Q_FRBDCB_WIDX_TRG(q) (IWX_RFH_Q0_FRBDCB_WIDX_TRG + (q) * 4)
|
|
/* Read index table */
|
|
#define IWX_RFH_Q0_FRBDCB_RIDX 0xA080C0
|
|
#define IWX_RFH_Q_FRBDCB_RIDX(q) (IWX_RFH_Q0_FRBDCB_RIDX + (q) * 4)
|
|
/* Used list table */
|
|
#define IWX_RFH_Q0_URBDCB_BA_LSB 0xA08100 /* 64 bit address */
|
|
#define IWX_RFH_Q_URBDCB_BA_LSB(q) (IWX_RFH_Q0_URBDCB_BA_LSB + (q) * 8)
|
|
/* Write index table */
|
|
#define IWX_RFH_Q0_URBDCB_WIDX 0xA08180
|
|
#define IWX_RFH_Q_URBDCB_WIDX(q) (IWX_RFH_Q0_URBDCB_WIDX + (q) * 4)
|
|
#define IWX_RFH_Q0_URBDCB_VAID 0xA081C0
|
|
#define IWX_RFH_Q_URBDCB_VAID(q) (IWX_RFH_Q0_URBDCB_VAID + (q) * 4)
|
|
/* stts */
|
|
#define IWX_RFH_Q0_URBD_STTS_WPTR_LSB 0xA08200 /*64 bits address */
|
|
#define IWX_RFH_Q_URBD_STTS_WPTR_LSB(q) (IWX_RFH_Q0_URBD_STTS_WPTR_LSB + (q) * 8)
|
|
|
|
#define IWX_RFH_Q0_ORB_WPTR_LSB 0xA08280
|
|
#define IWX_RFH_Q_ORB_WPTR_LSB(q) (IWX_RFH_Q0_ORB_WPTR_LSB + (q) * 8)
|
|
#define IWX_RFH_RBDBUF_RBD0_LSB 0xA08300
|
|
#define IWX_RFH_RBDBUF_RBD_LSB(q) (IWX_RFH_RBDBUF_RBD0_LSB + (q) * 8)
|
|
|
|
/**
|
|
* RFH Status Register
|
|
*
|
|
* Bit fields:
|
|
*
|
|
* Bit 29: RBD_FETCH_IDLE
|
|
* This status flag is set by the RFH when there is no active RBD fetch from
|
|
* DRAM.
|
|
* Once the RFH RBD controller starts fetching (or when there is a pending
|
|
* RBD read response from DRAM), this flag is immediately turned off.
|
|
*
|
|
* Bit 30: SRAM_DMA_IDLE
|
|
* This status flag is set by the RFH when there is no active transaction from
|
|
* SRAM to DRAM.
|
|
* Once the SRAM to DRAM DMA is active, this flag is immediately turned off.
|
|
*
|
|
* Bit 31: RXF_DMA_IDLE
|
|
* This status flag is set by the RFH when there is no active transaction from
|
|
* RXF to DRAM.
|
|
* Once the RXF-to-DRAM DMA is active, this flag is immediately turned off.
|
|
*/
|
|
#define IWX_RFH_GEN_STATUS 0xA09808
|
|
#define IWX_RFH_GEN_STATUS_GEN3 0xA07824
|
|
#define IWX_RBD_FETCH_IDLE (1 << 29)
|
|
#define IWX_SRAM_DMA_IDLE (1 << 30)
|
|
#define IWX_RXF_DMA_IDLE (1U << 31)
|
|
|
|
/* DMA configuration */
|
|
#define IWX_RFH_RXF_DMA_CFG 0xA09820
|
|
#define IWX_RFH_RXF_DMA_CFG_GEN3 0xA07880
|
|
/* RB size */
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_MASK (0x000F0000) /* bits 16-19 */
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_POS 16
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_1K (0x1 << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_2K (0x2 << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_4K (0x4 << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_8K (0x8 << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_12K (0x9 << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_16K (0xA << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_20K (0xB << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_24K (0xC << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_28K (0xD << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RB_SIZE_32K (0xE << IWX_RFH_RXF_DMA_RB_SIZE_POS)
|
|
/* RB Circular Buffer size:defines the table sizes in RBD units */
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_MASK (0x00F00000) /* bits 20-23 */
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_POS 20
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_8 (0x3 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_16 (0x4 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_32 (0x5 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_64 (0x7 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_128 (0x7 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_256 (0x8 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_512 (0x9 << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_1024 (0xA << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_RBDCB_SIZE_2048 (0xB << IWX_RFH_RXF_DMA_RBDCB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_MIN_RB_SIZE_MASK (0x03000000) /* bit 24-25 */
|
|
#define IWX_RFH_RXF_DMA_MIN_RB_SIZE_POS 24
|
|
#define IWX_RFH_RXF_DMA_MIN_RB_4_8 (3 << IWX_RFH_RXF_DMA_MIN_RB_SIZE_POS)
|
|
#define IWX_RFH_RXF_DMA_DROP_TOO_LARGE_MASK (0x04000000) /* bit 26 */
|
|
#define IWX_RFH_RXF_DMA_SINGLE_FRAME_MASK (0x20000000) /* bit 29 */
|
|
#define IWX_RFH_DMA_EN_MASK (0xC0000000) /* bits 30-31*/
|
|
#define IWX_RFH_DMA_EN_ENABLE_VAL (1U << 31)
|
|
|
|
#define IWX_RFH_RXF_RXQ_ACTIVE 0xA0980C
|
|
|
|
#define IWX_RFH_GEN_CFG 0xA09800
|
|
#define IWX_RFH_GEN_CFG_SERVICE_DMA_SNOOP (1 << 0)
|
|
#define IWX_RFH_GEN_CFG_RFH_DMA_SNOOP (1 << 1)
|
|
#define IWX_RFH_GEN_CFG_RB_CHUNK_SIZE_128 0x00000010
|
|
#define IWX_RFH_GEN_CFG_RB_CHUNK_SIZE_64 0x00000000
|
|
/* the driver assumes everywhere that the default RXQ is 0 */
|
|
#define IWX_RFH_GEN_CFG_DEFAULT_RXQ_NUM 0xF00
|
|
|
|
/* end of 9000 rx series registers */
|
|
|
|
/*
|
|
* This register is written by driver and is read by uCode during boot flow.
|
|
* Note this address is cleared after MAC reset.
|
|
*/
|
|
#define IWX_UREG_UCODE_LOAD_STATUS (0xa05c40)
|
|
#define IWX_UREG_CPU_INIT_RUN (0xa05c44)
|
|
|
|
/*
|
|
* HBUS (Host-side Bus)
|
|
*
|
|
* HBUS registers are mapped directly into PCI bus space, but are used
|
|
* to indirectly access device's internal memory or registers that
|
|
* may be powered-down.
|
|
*
|
|
* Use iwl_write_direct32()/iwl_read_direct32() family for these registers;
|
|
* host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
|
|
* to make sure the MAC (uCode processor, etc.) is powered up for accessing
|
|
* internal resources.
|
|
*
|
|
* Do not use iwl_write32()/iwl_read32() family to access these registers;
|
|
* these provide only simple PCI bus access, without waking up the MAC.
|
|
*/
|
|
#define IWX_HBUS_BASE (0x400)
|
|
|
|
/*
|
|
* Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
|
|
* structures, error log, event log, verifying uCode load).
|
|
* First write to address register, then read from or write to data register
|
|
* to complete the job. Once the address register is set up, accesses to
|
|
* data registers auto-increment the address by one dword.
|
|
* Bit usage for address registers (read or write):
|
|
* 0-31: memory address within device
|
|
*/
|
|
#define IWX_HBUS_TARG_MEM_RADDR (IWX_HBUS_BASE+0x00c)
|
|
#define IWX_HBUS_TARG_MEM_WADDR (IWX_HBUS_BASE+0x010)
|
|
#define IWX_HBUS_TARG_MEM_WDAT (IWX_HBUS_BASE+0x018)
|
|
#define IWX_HBUS_TARG_MEM_RDAT (IWX_HBUS_BASE+0x01c)
|
|
|
|
/*
|
|
* Registers for accessing device's internal peripheral registers
|
|
* (e.g. SCD, BSM, etc.). First write to address register,
|
|
* then read from or write to data register to complete the job.
|
|
* Bit usage for address registers (read or write):
|
|
* 0-15: register address (offset) within device
|
|
* 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
|
|
*/
|
|
#define IWX_HBUS_TARG_PRPH_WADDR (IWX_HBUS_BASE+0x044)
|
|
#define IWX_HBUS_TARG_PRPH_RADDR (IWX_HBUS_BASE+0x048)
|
|
#define IWX_HBUS_TARG_PRPH_WDAT (IWX_HBUS_BASE+0x04c)
|
|
#define IWX_HBUS_TARG_PRPH_RDAT (IWX_HBUS_BASE+0x050)
|
|
|
|
/* enable the ID buf for read */
|
|
#define IWX_WFPM_PS_CTL_CLR 0xa0300c
|
|
#define IWX_WFMP_MAC_ADDR_0 0xa03080
|
|
#define IWX_WFMP_MAC_ADDR_1 0xa03084
|
|
#define IWX_LMPM_PMG_EN 0xa01cec
|
|
#define IWX_RADIO_REG_SYS_MANUAL_DFT_0 0xad4078
|
|
#define IWX_RFIC_REG_RD 0xad0470
|
|
#define IWX_WFPM_CTRL_REG 0xa03030
|
|
#define IWX_WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK 0x08000000
|
|
#define IWX_ENABLE_WFPM 0x80000000
|
|
|
|
#define IWX_AUX_MISC_MASTER1_EN 0xa20818
|
|
#define IWX_AUX_MISC_MASTER1_EN_SBE_MSK 0x1
|
|
#define IWX_AUX_MISC_MASTER1_SMPHR_STATUS 0xa20800
|
|
#define IWX_RSA_ENABLE 0xa24b08
|
|
#define IWX_PREG_AUX_BUS_WPROT_0 0xa04cc0
|
|
#define IWX_PREG_PRPH_WPROT_9000 0xa04ce0
|
|
#define IWX_PREG_PRPH_WPROT_22000 0xa04d00
|
|
#define IWX_SB_CFG_OVERRIDE_ADDR 0xa26c78
|
|
#define IWX_SB_CFG_OVERRIDE_ENABLE 0x8000
|
|
#define IWX_SB_CFG_BASE_OVERRIDE 0xa20000
|
|
#define IWX_SB_MODIFY_CFG_FLAG 0xa03088
|
|
#define IWX_UMAG_SB_CPU_1_STATUS 0xa038c0
|
|
#define IWX_UMAG_SB_CPU_2_STATUS 0xa038c4
|
|
|
|
#define IWX_UREG_CHICK 0xa05c00
|
|
#define IWX_UREG_CHICK_MSI_ENABLE (1 << 24)
|
|
#define IWX_UREG_CHICK_MSIX_ENABLE (1 << 25)
|
|
|
|
#define IWX_HPM_DEBUG 0xa03440
|
|
#define IWX_PERSISTENCE_BIT (1 << 12)
|
|
#define IWX_PREG_WFPM_ACCESS (1 << 12)
|
|
|
|
#define IWX_HPM_HIPM_GEN_CFG 0xa03458
|
|
#define IWX_HPM_HIPM_GEN_CFG_CR_PG_EN (1 << 0)
|
|
#define IWX_HPM_HIPM_GEN_CFG_CR_SLP_EN (1 << 1)
|
|
#define IWX_HPM_HIPM_GEN_CFG_CR_FORCE_ACTIVE (1 << 10)
|
|
|
|
#define IWX_UREG_DOORBELL_TO_ISR6 0xa05c04
|
|
#define IWX_UREG_DOORBELL_TO_ISR6_NMI_BIT (1 << 0)
|
|
#define IWX_UREG_DOORBELL_TO_ISR6_RESET_HANDSHAKE ((1 << 0) | (1 << 1))
|
|
#define IWX_UREG_DOORBELL_TO_ISR6_SUSPEND (1 << 18)
|
|
#define IWX_UREG_DOORBELL_TO_ISR6_RESUME (1 << 19)
|
|
#define IWX_UREG_DOORBELL_TO_ISR6_PNVM (1 << 20)
|
|
|
|
/* LTR control (Qu only) */
|
|
#define IWX_HPM_MAC_LTR_CSR 0xa0348c
|
|
#define IWX_HPM_MAC_LRT_ENABLE_ALL 0xf
|
|
/* also uses CSR_LTR_* for values */
|
|
#define IWX_HPM_UMAC_LTR 0xa03480
|
|
|
|
/*
|
|
* Per-Tx-queue write pointer (index, really!)
|
|
* Indicates index to next TFD that driver will fill (1 past latest filled).
|
|
* Bit usage:
|
|
* 0-7: queue write index
|
|
* 11-8: queue selector
|
|
*/
|
|
#define IWX_HBUS_TARG_WRPTR (IWX_HBUS_BASE+0x060)
|
|
|
|
/**********************************************************
|
|
* CSR values
|
|
**********************************************************/
|
|
/*
|
|
* host interrupt timeout value
|
|
* used with setting interrupt coalescing timer
|
|
* the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
|
|
*
|
|
* default interrupt coalescing timer is 64 x 32 = 2048 usecs
|
|
*/
|
|
#define IWX_HOST_INT_TIMEOUT_MAX (0xFF)
|
|
#define IWX_HOST_INT_TIMEOUT_DEF (0x40)
|
|
#define IWX_HOST_INT_TIMEOUT_MIN (0x0)
|
|
#define IWX_HOST_INT_OPER_MODE (1U << 31)
|
|
|
|
/*****************************************************************************
|
|
* MSIX related registers *
|
|
*****************************************************************************/
|
|
|
|
#define IWX_CSR_MSIX_BASE (0x2000)
|
|
#define IWX_CSR_MSIX_FH_INT_CAUSES_AD (IWX_CSR_MSIX_BASE + 0x800)
|
|
#define IWX_CSR_MSIX_FH_INT_MASK_AD (IWX_CSR_MSIX_BASE + 0x804)
|
|
#define IWX_CSR_MSIX_HW_INT_CAUSES_AD (IWX_CSR_MSIX_BASE + 0x808)
|
|
#define IWX_CSR_MSIX_HW_INT_MASK_AD (IWX_CSR_MSIX_BASE + 0x80C)
|
|
#define IWX_CSR_MSIX_AUTOMASK_ST_AD (IWX_CSR_MSIX_BASE + 0x810)
|
|
#define IWX_CSR_MSIX_RX_IVAR_AD_REG (IWX_CSR_MSIX_BASE + 0x880)
|
|
#define IWX_CSR_MSIX_IVAR_AD_REG (IWX_CSR_MSIX_BASE + 0x890)
|
|
#define IWX_CSR_MSIX_PENDING_PBA_AD (IWX_CSR_MSIX_BASE + 0x1000)
|
|
#define IWX_CSR_MSIX_RX_IVAR(cause) (IWX_CSR_MSIX_RX_IVAR_AD_REG + (cause))
|
|
#define IWX_CSR_MSIX_IVAR(cause) (IWX_CSR_MSIX_IVAR_AD_REG + (cause))
|
|
|
|
/*
|
|
* Causes for the FH register interrupts
|
|
*/
|
|
enum msix_fh_int_causes {
|
|
IWX_MSIX_FH_INT_CAUSES_Q0 = (1 << 0),
|
|
IWX_MSIX_FH_INT_CAUSES_Q1 = (1 << 1),
|
|
IWX_MSIX_FH_INT_CAUSES_D2S_CH0_NUM = (1 << 16),
|
|
IWX_MSIX_FH_INT_CAUSES_D2S_CH1_NUM = (1 << 17),
|
|
IWX_MSIX_FH_INT_CAUSES_S2D = (1 << 19),
|
|
IWX_MSIX_FH_INT_CAUSES_FH_ERR = (1 << 21),
|
|
};
|
|
|
|
/*
|
|
* Causes for the HW register interrupts
|
|
*/
|
|
enum mix_hw_int_causes {
|
|
IWX_MSIX_HW_INT_CAUSES_REG_ALIVE = (1 << 0),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_WAKEUP = (1 << 1),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_RESET_DONE = (1 << 2),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_SW_ERR_V2 = (1 << 5),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_CT_KILL = (1 << 6),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_RF_KILL = (1 << 7),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_PERIODIC = (1 << 8),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_SW_ERR = (1 << 25),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_SCD = (1 << 26),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_FH_TX = (1 << 27),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_HW_ERR = (1 << 29),
|
|
IWX_MSIX_HW_INT_CAUSES_REG_HAP = (1 << 30),
|
|
};
|
|
|
|
/*
|
|
* Registers to map causes to vectors
|
|
*/
|
|
enum msix_ivar_for_cause {
|
|
IWX_MSIX_IVAR_CAUSE_D2S_CH0_NUM = 0x0,
|
|
IWX_MSIX_IVAR_CAUSE_D2S_CH1_NUM = 0x1,
|
|
IWX_MSIX_IVAR_CAUSE_S2D = 0x3,
|
|
IWX_MSIX_IVAR_CAUSE_FH_ERR = 0x5,
|
|
IWX_MSIX_IVAR_CAUSE_REG_ALIVE = 0x10,
|
|
IWX_MSIX_IVAR_CAUSE_REG_WAKEUP = 0x11,
|
|
IWX_MSIX_IVAR_CAUSE_REG_RESET_DONE = 0x12,
|
|
IWX_MSIX_IVAR_CAUSE_REG_CT_KILL = 0x16,
|
|
IWX_MSIX_IVAR_CAUSE_REG_RF_KILL = 0x17,
|
|
IWX_MSIX_IVAR_CAUSE_REG_PERIODIC = 0x18,
|
|
IWX_MSIX_IVAR_CAUSE_REG_SW_ERR = 0x29,
|
|
IWX_MSIX_IVAR_CAUSE_REG_SCD = 0x2a,
|
|
IWX_MSIX_IVAR_CAUSE_REG_FH_TX = 0x2b,
|
|
IWX_MSIX_IVAR_CAUSE_REG_HW_ERR = 0x2d,
|
|
IWX_MSIX_IVAR_CAUSE_REG_HAP = 0x2e,
|
|
};
|
|
|
|
#define IWX_MSIX_AUTO_CLEAR_CAUSE (0 << 7)
|
|
#define IWX_MSIX_NON_AUTO_CLEAR_CAUSE (1 << 7)
|
|
|
|
#define IWX_CSR_ADDR_BASE(sc) ((sc)->mac_addr_from_csr)
|
|
#define IWX_CSR_MAC_ADDR0_OTP(sc) (IWX_CSR_ADDR_BASE(sc) + 0x00)
|
|
#define IWX_CSR_MAC_ADDR1_OTP(sc) (IWX_CSR_ADDR_BASE(sc) + 0x04)
|
|
#define IWX_CSR_MAC_ADDR0_STRAP(sc) (IWX_CSR_ADDR_BASE(sc) + 0x08)
|
|
#define IWX_CSR_MAC_ADDR1_STRAP(sc) (IWX_CSR_ADDR_BASE(sc) + 0x0c)
|
|
|
|
/**
|
|
* uCode API flags
|
|
* @IWX_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
|
|
* was a separate TLV but moved here to save space.
|
|
* @IWX_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
|
|
* treats good CRC threshold as a boolean
|
|
* @IWX_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
|
|
* @IWX_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
|
|
* @IWX_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
|
|
* @IWX_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
|
|
* @IWX_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
|
|
* offload profile config command.
|
|
* @IWX_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
|
|
* (rather than two) IPv6 addresses
|
|
* @IWX_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
|
|
* from the probe request template.
|
|
* @IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
|
|
* @IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
|
|
* @IWX_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
|
|
* single bound interface).
|
|
* @IWX_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
|
|
* @IWX_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
|
|
* @IWX_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
|
|
* @IWX_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
|
|
* @IWX_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
|
|
*
|
|
*/
|
|
#define IWX_UCODE_TLV_FLAGS_PAN (1 << 0)
|
|
#define IWX_UCODE_TLV_FLAGS_NEWSCAN (1 << 1)
|
|
#define IWX_UCODE_TLV_FLAGS_MFP (1 << 2)
|
|
#define IWX_UCODE_TLV_FLAGS_P2P (1 << 3)
|
|
#define IWX_UCODE_TLV_FLAGS_DW_BC_TABLE (1 << 4)
|
|
#define IWX_UCODE_TLV_FLAGS_SHORT_BL (1 << 7)
|
|
#define IWX_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS (1 << 10)
|
|
#define IWX_UCODE_TLV_FLAGS_NO_BASIC_SSID (1 << 12)
|
|
#define IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL (1 << 15)
|
|
#define IWX_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE (1 << 16)
|
|
#define IWX_UCODE_TLV_FLAGS_P2P_PS (1 << 21)
|
|
#define IWX_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM (1 << 22)
|
|
#define IWX_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM (1 << 23)
|
|
#define IWX_UCODE_TLV_FLAGS_UAPSD_SUPPORT (1 << 24)
|
|
#define IWX_UCODE_TLV_FLAGS_EBS_SUPPORT (1 << 25)
|
|
#define IWX_UCODE_TLV_FLAGS_P2P_PS_UAPSD (1 << 26)
|
|
#define IWX_UCODE_TLV_FLAGS_BCAST_FILTERING (1 << 29)
|
|
#define IWX_UCODE_TLV_FLAGS_GO_UAPSD (1 << 30)
|
|
#define IWX_UCODE_TLV_FLAGS_LTE_COEX (1U << 31)
|
|
|
|
#define IWX_UCODE_TLV_FLAG_BITS \
|
|
"\020\1PAN\2NEWSCAN\3MFP\4P2P\5DW_BC_TABLE\6NEWBT_COEX\7PM_CMD\10SHORT_BL\11RX_ENERGY\12TIME_EVENT_V2\13D3_6_IPV6\14BF_UPDATED\15NO_BASIC_SSID\17D3_CONTINUITY\20NEW_NSOFFL_S\21NEW_NSOFFL_L\22SCHED_SCAN\24STA_KEY_CMD\25DEVICE_PS_CMD\26P2P_PS\27P2P_PS_DCM\30P2P_PS_SCM\31UAPSD_SUPPORT\32EBS\33P2P_PS_UAPSD\36BCAST_FILTERING\37GO_UAPSD\40LTE_COEX"
|
|
|
|
/**
|
|
* uCode TLV api
|
|
* @IWX_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
|
|
* longer than the passive one, which is essential for fragmented scan.
|
|
* @IWX_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
|
|
* @IWX_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header
|
|
* @IWX_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
|
|
* @IWX_UCODE_TLV_API_NEW_VERSION: new versioning format
|
|
* @IWX_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
|
|
* (command version 3) that supports per-chain limits
|
|
* @IWX_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan
|
|
* iteration complete notification, and the timestamp reported for RX
|
|
* received during scan, are reported in TSF of the mac specified in the
|
|
* scan request.
|
|
* @IWX_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of
|
|
* ADD_MODIFY_STA_KEY_API_S_VER_2.
|
|
* @IWX_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignment.
|
|
* @IWX_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority
|
|
* instead of 3.
|
|
* @IWX_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used
|
|
* @IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG: This ucode supports v3 of
|
|
* SCAN_CONFIG_DB_CMD_API_S.
|
|
*
|
|
* @IWX_NUM_UCODE_TLV_API: number of bits used
|
|
*/
|
|
#define IWX_UCODE_TLV_API_FRAGMENTED_SCAN 8
|
|
#define IWX_UCODE_TLV_API_WIFI_MCC_UPDATE 9
|
|
#define IWX_UCODE_TLV_API_WIDE_CMD_HDR 14
|
|
#define IWX_UCODE_TLV_API_LQ_SS_PARAMS 18
|
|
#define IWX_UCODE_TLV_API_NEW_VERSION 20
|
|
#define IWX_UCODE_TLV_API_EXT_SCAN_PRIORITY 24
|
|
#define IWX_UCODE_TLV_API_TX_POWER_CHAIN 27
|
|
#define IWX_UCODE_TLV_API_SCAN_TSF_REPORT 28
|
|
#define IWX_UCODE_TLV_API_TKIP_MIC_KEYS 29
|
|
#define IWX_UCODE_TLV_API_STA_TYPE 30
|
|
#define IWX_UCODE_TLV_API_NAN2_VER2 31
|
|
#define IWX_UCODE_TLV_API_ADAPTIVE_DWELL 32
|
|
#define IWX_UCODE_TLV_API_NEW_RX_STATS 35
|
|
#define IWX_UCODE_TLV_API_WOWLAN_KEY_MATERIAL 36
|
|
#define IWX_UCODE_TLV_API_QUOTA_LOW_LATENCY 38
|
|
#define IWX_UCODE_TLV_API_DEPRECATE_TTAK 41
|
|
#define IWX_UCODE_TLV_API_ADAPTIVE_DWELL_V2 42
|
|
#define IWX_UCODE_TLV_API_NAN_NOTIF_V2 43
|
|
#define IWX_UCODE_TLV_API_FRAG_EBS 44
|
|
#define IWX_UCODE_TLV_API_REDUCE_TX_POWER 45
|
|
#define IWX_UCODE_TLV_API_SHORT_BEACON_NOTIF 46
|
|
#define IWX_UCODE_TLV_API_BEACON_FILTER_V4 47
|
|
#define IWX_UCODE_TLV_API_REGULATORY_NVM_INFO 48
|
|
#define IWX_UCODE_TLV_API_FTM_NEW_RANGE_REQ 49
|
|
#define IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG 56
|
|
#define IWX_UCODE_TLV_API_SCAN_OFFLOAD_CHANS 50
|
|
#define IWX_UCODE_TLV_API_MBSSID_HE 52
|
|
#define IWX_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE 53
|
|
#define IWX_UCODE_TLV_API_FTM_RTT_ACCURACY 54
|
|
#define IWX_UCODE_TLV_API_SAR_TABLE_VER 55
|
|
#define IWX_UCODE_TLV_API_REDUCED_SCAN_CONFIG 56
|
|
#define IWX_UCODE_TLV_API_ADWELL_HB_DEF_N_AP 57
|
|
#define IWX_UCODE_TLV_API_SCAN_EXT_CHAN_VER 58
|
|
#define IWX_UCODE_TLV_API_BAND_IN_RX_DATA 59
|
|
#define IWX_NUM_UCODE_TLV_API 128
|
|
|
|
#define IWX_UCODE_TLV_API_BITS \
|
|
"\020\10FRAGMENTED_SCAN\11WIFI_MCC_UPDATE\16WIDE_CMD_HDR\22LQ_SS_PARAMS\30EXT_SCAN_PRIO\33TX_POWER_CHAIN\35TKIP_MIC_KEYS"
|
|
|
|
/**
|
|
* uCode capabilities
|
|
* @IWX_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
|
|
* @IWX_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
|
|
* @IWX_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
|
|
* @IWX_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
|
|
* @IWX_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
|
|
* @IWX_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
|
|
* @IWX_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
|
|
* tx power value into TPC Report action frame and Link Measurement Report
|
|
* action frame
|
|
* @IWX_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
|
|
* channel in DS parameter set element in probe requests.
|
|
* @IWX_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
|
|
* probe requests.
|
|
* @IWX_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
|
|
* @IWX_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
|
|
* which also implies support for the scheduler configuration command
|
|
* @IWX_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
|
|
* @IWX_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
|
|
* @IWX_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
|
|
* @IWX_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
|
|
* @IWX_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command
|
|
* @IWX_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
|
|
* @IWX_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
|
|
* @IWX_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD: support p2p standalone U-APSD
|
|
* @IWX_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
|
|
* @IWX_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
|
|
* sources for the MCC. This TLV bit is a future replacement to
|
|
* IWX_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
|
|
* is supported.
|
|
* @IWX_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
|
|
* @IWX_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
|
|
* @IWX_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN
|
|
* @IWX_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported,
|
|
* 0=no support)
|
|
* @IWx_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band
|
|
* (6 GHz).
|
|
* @IWX_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
|
|
* @IWX_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
|
|
* @IWX_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
|
|
* @IWX_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
|
|
* antenna the beacon should be transmitted
|
|
* @IWX_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
|
|
* from AP and will send it upon d0i3 exit.
|
|
* @IWX_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
|
|
* @IWX_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
|
|
* @IWX_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
|
|
* thresholds reporting
|
|
* @IWX_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
|
|
* @IWX_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
|
|
* regular image.
|
|
* @IWX_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
|
|
* memory addresses from the firmware.
|
|
* @IWX_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
|
|
* @IWX_UCODE_TLV_CAPA_LMAC_UPLOAD: supports upload mode in lmac (1=supported,
|
|
* 0=no support)
|
|
*
|
|
* @IWX_NUM_UCODE_TLV_CAPA: number of bits used
|
|
*/
|
|
#define IWX_UCODE_TLV_CAPA_D0I3_SUPPORT 0
|
|
#define IWX_UCODE_TLV_CAPA_LAR_SUPPORT 1
|
|
#define IWX_UCODE_TLV_CAPA_UMAC_SCAN 2
|
|
#define IWX_UCODE_TLV_CAPA_BEAMFORMER 3
|
|
#define IWX_UCODE_TLV_CAPA_TOF_SUPPORT 5
|
|
#define IWX_UCODE_TLV_CAPA_TDLS_SUPPORT 6
|
|
#define IWX_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT 8
|
|
#define IWX_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT 9
|
|
#define IWX_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT 10
|
|
#define IWX_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT 11
|
|
#define IWX_UCODE_TLV_CAPA_DQA_SUPPORT 12
|
|
#define IWX_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH 13
|
|
#define IWX_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG 17
|
|
#define IWX_UCODE_TLV_CAPA_HOTSPOT_SUPPORT 18
|
|
#define IWX_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT 19
|
|
#define IWX_UCODE_TLV_CAPA_2G_COEX_SUPPORT 20
|
|
#define IWX_UCODE_TLV_CAPA_CSUM_SUPPORT 21
|
|
#define IWX_UCODE_TLV_CAPA_RADIO_BEACON_STATS 22
|
|
#define IWX_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD 26
|
|
#define IWX_UCODE_TLV_CAPA_BT_COEX_PLCR 28
|
|
#define IWX_UCODE_TLV_CAPA_LAR_MULTI_MCC 29
|
|
#define IWX_UCODE_TLV_CAPA_BT_COEX_RRC 30
|
|
#define IWX_UCODE_TLV_CAPA_GSCAN_SUPPORT 31
|
|
#define IWX_UCODE_TLV_CAPA_NAN_SUPPORT 34
|
|
#define IWX_UCODE_TLV_CAPA_UMAC_UPLOAD 35
|
|
#define IWM_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT 37
|
|
#define IWX_UCODE_TLV_CAPA_STA_PM_NOTIF 38
|
|
#define IWX_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT 39
|
|
#define IWX_UCODE_TLV_CAPA_CDB_SUPPORT 40
|
|
#define IWX_UCODE_TLV_CAPA_D0I3_END_FIRST 41
|
|
#define IWX_UCODE_TLV_CAPA_TLC_OFFLOAD 43
|
|
#define IWX_UCODE_TLV_CAPA_DYNAMIC_QUOTA 44
|
|
#define IWX_UCODE_TLV_CAPA_COEX_SCHEMA_2 45
|
|
#define IWX_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD 46
|
|
#define IWX_UCODE_TLV_CAPA_FTM_CALIBRATED 47
|
|
#define IWX_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS 48
|
|
#define IWX_UCODE_TLV_CAPA_CS_MODIFY 49
|
|
#define IWX_UCODE_TLV_CAPA_SET_LTR_GEN2 50
|
|
#define IWX_UCODE_TLV_CAPA_SET_PPAG 52
|
|
#define IWX_UCODE_TLV_CAPA_TAS_CFG 53
|
|
#define IWX_UCODE_TLV_CAPA_SESSION_PROT_CMD 54
|
|
#define IWX_UCODE_TLV_CAPA_PROTECTED_TWT 56
|
|
#define IWX_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE 57
|
|
#define IWX_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN 58
|
|
#define IWX_UCODE_TLV_CAPA_PROTECTED_TWT 56
|
|
#define IWX_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE 57
|
|
#define IWX_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN 58
|
|
#define IWX_UCODE_TLV_CAPA_BAID_ML_SUPPORT 63
|
|
#define IWX_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE 64
|
|
#define IWX_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS 65
|
|
#define IWX_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT 67
|
|
#define IWX_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT 68
|
|
#define IWX_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD 70
|
|
#define IWX_UCODE_TLV_CAPA_BEACON_ANT_SELECTION 71
|
|
#define IWX_UCODE_TLV_CAPA_BEACON_STORING 72
|
|
#define IWX_UCODE_TLV_CAPA_LAR_SUPPORT_V3 73
|
|
#define IWX_UCODE_TLV_CAPA_CT_KILL_BY_FW 74
|
|
#define IWX_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT 75
|
|
#define IWX_UCODE_TLV_CAPA_CTDP_SUPPORT 76
|
|
#define IWX_UCODE_TLV_CAPA_USNIFFER_UNIFIED 77
|
|
#define IWX_UCODE_TLV_CAPA_LMAC_UPLOAD 79
|
|
#define IWX_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG 80
|
|
#define IWX_UCODE_TLV_CAPA_LQM_SUPPORT 81
|
|
#define IWX_UCODE_TLV_CAPA_TX_POWER_ACK 84
|
|
#define IWX_UCODE_TLV_CAPA_D3_DEBUG 87
|
|
#define IWX_UCODE_TLV_CAPA_LED_CMD_SUPPORT 88
|
|
#define IWX_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT 89
|
|
#define IWX_UCODE_TLV_CAPA_CSI_REPORTING 90
|
|
#define IWX_UCODE_TLV_CAPA_CSI_REPORTING_V2 91
|
|
#define IWX_UCODE_TLV_CAPA_DBG_SUSPEND_RESUME_CMD_SUPP 92
|
|
#define IWX_UCODE_TLV_CAPA_DBG_BUF_ALLOC_CMD_SUPP 93
|
|
#define IWX_UCODE_TLV_CAPA_MLME_OFFLOAD 96
|
|
#define IWX_UCODE_TLV_CAPA_BIGTK_SUPPORT 100
|
|
#define IWX_UCODE_TLV_CAPA_RFIM_SUPPORT 102
|
|
|
|
#define IWX_NUM_UCODE_TLV_CAPA 128
|
|
|
|
/*
|
|
* For 16.0 uCode and above, there is no differentiation between sections,
|
|
* just an offset to the HW address.
|
|
*/
|
|
#define IWX_CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
|
|
#define IWX_PAGING_SEPARATOR_SECTION 0xAAAABBBB
|
|
|
|
/* uCode version contains 4 values: Major/Minor/API/Serial */
|
|
#define IWX_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
|
|
#define IWX_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
|
|
#define IWX_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
|
|
#define IWX_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
|
|
|
|
/*
|
|
* Calibration control struct.
|
|
* Sent as part of the phy configuration command.
|
|
* @flow_trigger: bitmap for which calibrations to perform according to
|
|
* flow triggers.
|
|
* @event_trigger: bitmap for which calibrations to perform according to
|
|
* event triggers.
|
|
*/
|
|
struct iwx_tlv_calib_ctrl {
|
|
uint32_t flow_trigger;
|
|
uint32_t event_trigger;
|
|
} __packed;
|
|
|
|
#define IWX_FW_PHY_CFG_RADIO_TYPE_POS 0
|
|
#define IWX_FW_PHY_CFG_RADIO_TYPE (0x3 << IWX_FW_PHY_CFG_RADIO_TYPE_POS)
|
|
#define IWX_FW_PHY_CFG_RADIO_STEP_POS 2
|
|
#define IWX_FW_PHY_CFG_RADIO_STEP (0x3 << IWX_FW_PHY_CFG_RADIO_STEP_POS)
|
|
#define IWX_FW_PHY_CFG_RADIO_DASH_POS 4
|
|
#define IWX_FW_PHY_CFG_RADIO_DASH (0x3 << IWX_FW_PHY_CFG_RADIO_DASH_POS)
|
|
#define IWX_FW_PHY_CFG_TX_CHAIN_POS 16
|
|
#define IWX_FW_PHY_CFG_TX_CHAIN (0xf << IWX_FW_PHY_CFG_TX_CHAIN_POS)
|
|
#define IWX_FW_PHY_CFG_RX_CHAIN_POS 20
|
|
#define IWX_FW_PHY_CFG_RX_CHAIN (0xf << IWX_FW_PHY_CFG_RX_CHAIN_POS)
|
|
|
|
/**
|
|
* struct iwx_fw_cipher_scheme - a cipher scheme supported by FW.
|
|
* @cipher: a cipher suite selector
|
|
* @flags: cipher scheme flags (currently reserved for a future use)
|
|
* @hdr_len: a size of MPDU security header
|
|
* @pn_len: a size of PN
|
|
* @pn_off: an offset of pn from the beginning of the security header
|
|
* @key_idx_off: an offset of key index byte in the security header
|
|
* @key_idx_mask: a bit mask of key_idx bits
|
|
* @key_idx_shift: bit shift needed to get key_idx
|
|
* @mic_len: mic length in bytes
|
|
* @hw_cipher: a HW cipher index used in host commands
|
|
*/
|
|
struct iwx_fw_cipher_scheme {
|
|
uint32_t cipher;
|
|
uint8_t flags;
|
|
uint8_t hdr_len;
|
|
uint8_t pn_len;
|
|
uint8_t pn_off;
|
|
uint8_t key_idx_off;
|
|
uint8_t key_idx_mask;
|
|
uint8_t key_idx_shift;
|
|
uint8_t mic_len;
|
|
uint8_t hw_cipher;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_cscheme_list - a cipher scheme list
|
|
* @size: a number of entries
|
|
* @cs: cipher scheme entries
|
|
*/
|
|
struct iwx_fw_cscheme_list {
|
|
uint8_t size;
|
|
struct iwx_fw_cipher_scheme cs[];
|
|
} __packed;
|
|
|
|
/* v1/v2 uCode file layout */
|
|
struct iwx_ucode_header {
|
|
uint32_t ver; /* major/minor/API/serial */
|
|
union {
|
|
struct {
|
|
uint32_t inst_size; /* bytes of runtime code */
|
|
uint32_t data_size; /* bytes of runtime data */
|
|
uint32_t init_size; /* bytes of init code */
|
|
uint32_t init_data_size; /* bytes of init data */
|
|
uint32_t boot_size; /* bytes of bootstrap code */
|
|
uint8_t data[0]; /* in same order as sizes */
|
|
} v1;
|
|
struct {
|
|
uint32_t build; /* build number */
|
|
uint32_t inst_size; /* bytes of runtime code */
|
|
uint32_t data_size; /* bytes of runtime data */
|
|
uint32_t init_size; /* bytes of init code */
|
|
uint32_t init_data_size; /* bytes of init data */
|
|
uint32_t boot_size; /* bytes of bootstrap code */
|
|
uint8_t data[0]; /* in same order as sizes */
|
|
} v2;
|
|
} u;
|
|
};
|
|
|
|
/*
|
|
* new TLV uCode file layout
|
|
*
|
|
* The new TLV file format contains TLVs, that each specify
|
|
* some piece of data.
|
|
*/
|
|
|
|
#define IWX_UCODE_TLV_INVALID 0 /* unused */
|
|
#define IWX_UCODE_TLV_INST 1
|
|
#define IWX_UCODE_TLV_DATA 2
|
|
#define IWX_UCODE_TLV_INIT 3
|
|
#define IWX_UCODE_TLV_INIT_DATA 4
|
|
#define IWX_UCODE_TLV_BOOT 5
|
|
#define IWX_UCODE_TLV_PROBE_MAX_LEN 6 /* a uint32_t value */
|
|
#define IWX_UCODE_TLV_PAN 7
|
|
#define IWX_UCODE_TLV_RUNT_EVTLOG_PTR 8
|
|
#define IWX_UCODE_TLV_RUNT_EVTLOG_SIZE 9
|
|
#define IWX_UCODE_TLV_RUNT_ERRLOG_PTR 10
|
|
#define IWX_UCODE_TLV_INIT_EVTLOG_PTR 11
|
|
#define IWX_UCODE_TLV_INIT_EVTLOG_SIZE 12
|
|
#define IWX_UCODE_TLV_INIT_ERRLOG_PTR 13
|
|
#define IWX_UCODE_TLV_ENHANCE_SENS_TBL 14
|
|
#define IWX_UCODE_TLV_PHY_CALIBRATION_SIZE 15
|
|
#define IWX_UCODE_TLV_WOWLAN_INST 16
|
|
#define IWX_UCODE_TLV_WOWLAN_DATA 17
|
|
#define IWX_UCODE_TLV_FLAGS 18
|
|
#define IWX_UCODE_TLV_SEC_RT 19
|
|
#define IWX_UCODE_TLV_SEC_INIT 20
|
|
#define IWX_UCODE_TLV_SEC_WOWLAN 21
|
|
#define IWX_UCODE_TLV_DEF_CALIB 22
|
|
#define IWX_UCODE_TLV_PHY_SKU 23
|
|
#define IWX_UCODE_TLV_SECURE_SEC_RT 24
|
|
#define IWX_UCODE_TLV_SECURE_SEC_INIT 25
|
|
#define IWX_UCODE_TLV_SECURE_SEC_WOWLAN 26
|
|
#define IWX_UCODE_TLV_NUM_OF_CPU 27
|
|
#define IWX_UCODE_TLV_CSCHEME 28
|
|
#define IWX_UCODE_TLV_API_CHANGES_SET 29
|
|
#define IWX_UCODE_TLV_ENABLED_CAPABILITIES 30
|
|
#define IWX_UCODE_TLV_N_SCAN_CHANNELS 31
|
|
#define IWX_UCODE_TLV_PAGING 32
|
|
#define IWX_UCODE_TLV_SEC_RT_USNIFFER 34
|
|
#define IWX_UCODE_TLV_SDIO_ADMA_ADDR 35
|
|
#define IWX_UCODE_TLV_FW_VERSION 36
|
|
#define IWX_UCODE_TLV_FW_DBG_DEST 38
|
|
#define IWX_UCODE_TLV_FW_DBG_CONF 39
|
|
#define IWX_UCODE_TLV_FW_DBG_TRIGGER 40
|
|
#define IWX_UCODE_TLV_CMD_VERSIONS 48
|
|
#define IWX_UCODE_TLV_FW_GSCAN_CAPA 50
|
|
#define IWX_UCODE_TLV_FW_MEM_SEG 51
|
|
#define IWX_UCODE_TLV_IML 52
|
|
#define IWX_UCODE_TLV_FW_FMAC_API_VERSION 53
|
|
#define IWX_UCODE_TLV_UMAC_DEBUG_ADDRS 54
|
|
#define IWX_UCODE_TLV_LMAC_DEBUG_ADDRS 55
|
|
#define IWX_UCODE_TLV_FW_RECOVERY_INFO 57
|
|
#define IWX_UCODE_TLV_HW_TYPE 58
|
|
#define IWX_UCODE_TLV_FW_FMAC_RECOVERY_INFO 59
|
|
#define IWX_UCODE_TLV_FW_FSEQ_VERSION 60
|
|
#define IWX_UCODE_TLV_PHY_INTEGRATION_VERSION 61
|
|
#define IWX_UCODE_TLV_PNVM_VERSION 62
|
|
#define IWX_UCODE_TLV_PNVM_SKU 64
|
|
|
|
#define IWX_UCODE_TLV_SEC_TABLE_ADDR 66
|
|
#define IWX_UCODE_TLV_D3_KEK_KCK_ADDR 67
|
|
#define IWX_UCODE_TLV_CURRENT_PC 68
|
|
|
|
#define IWX_UCODE_TLV_CONST_BASE 0x100
|
|
#define IWX_UCODE_TLV_FW_NUM_STATIONS (IWX_UCODE_TLV_CONST_BASE + 0)
|
|
#define IWX_UCODE_TLV_FW_NUM_BEACONS (IWX_UCODE_TLV_CONST_BASE + 2)
|
|
|
|
#define IWX_UCODE_TLV_DEBUG_BASE 0x1000005
|
|
#define IWX_UCODE_TLV_TYPE_DEBUG_INFO (IWX_UCODE_TLV_DEBUG_BASE + 0)
|
|
#define IWX_UCODE_TLV_TYPE_BUFFER_ALLOCATION (IWX_UCODE_TLV_DEBUG_BASE + 1)
|
|
#define IWX_UCODE_TLV_TYPE_HCMD (IWX_UCODE_TLV_DEBUG_BASE + 2)
|
|
#define IWX_UCODE_TLV_TYPE_REGIONS (IWX_UCODE_TLV_DEBUG_BASE + 3)
|
|
#define IWX_UCODE_TLV_TYPE_TRIGGERS (IWX_UCODE_TLV_DEBUG_BASE + 4)
|
|
#define IWX_UCODE_TLV_TYPE_CONF_SET (IWX_UCODE_TLV_DEBUG_BASE + 5)
|
|
#define IWX_UCODE_TLV_DEBUG_MAX IWX_UCODE_TLV_TYPE_CONF_SET
|
|
|
|
|
|
struct iwx_ucode_tlv {
|
|
uint32_t type; /* see above */
|
|
uint32_t length; /* not including type/length fields */
|
|
uint8_t data[0];
|
|
};
|
|
|
|
struct iwx_ucode_api {
|
|
uint32_t api_index;
|
|
uint32_t api_flags;
|
|
} __packed;
|
|
|
|
struct iwx_ucode_capa {
|
|
uint32_t api_index;
|
|
uint32_t api_capa;
|
|
} __packed;
|
|
|
|
#define IWX_TLV_UCODE_MAGIC 0x0a4c5749
|
|
|
|
struct iwx_tlv_ucode_header {
|
|
/*
|
|
* The TLV style ucode header is distinguished from
|
|
* the v1/v2 style header by first four bytes being
|
|
* zero, as such is an invalid combination of
|
|
* major/minor/API/serial versions.
|
|
*/
|
|
uint32_t zero;
|
|
uint32_t magic;
|
|
uint8_t human_readable[64];
|
|
uint32_t ver; /* major/minor/API/serial */
|
|
uint32_t build;
|
|
uint64_t ignore;
|
|
/*
|
|
* The data contained herein has a TLV layout,
|
|
* see above for the TLV header and types.
|
|
* Note that each TLV is padded to a length
|
|
* that is a multiple of 4 for alignment.
|
|
*/
|
|
uint8_t data[0];
|
|
};
|
|
|
|
/*
|
|
* Registers in this file are internal, not PCI bus memory mapped.
|
|
* Driver accesses these via IWX_HBUS_TARG_PRPH_* registers.
|
|
*/
|
|
#define IWX_PRPH_BASE (0x00000)
|
|
#define IWX_PRPH_END (0xFFFFF)
|
|
|
|
/****************************/
|
|
/* Flow Handler Definitions */
|
|
/****************************/
|
|
|
|
/**
|
|
* struct iwx_rb_status - receive buffer status
|
|
* host memory mapped FH registers
|
|
* @closed_rb_num [0:11] - Indicates the index of the RB which was closed
|
|
* @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed
|
|
* @finished_rb_num [0:11] - Indicates the index of the current RB
|
|
* in which the last frame was written to
|
|
* @finished_fr_num [0:11] - Indicates the index of the RX Frame
|
|
* which was transferred
|
|
*/
|
|
struct iwx_rb_status {
|
|
uint16_t closed_rb_num;
|
|
uint16_t closed_fr_num;
|
|
uint16_t finished_rb_num;
|
|
uint16_t finished_fr_nam;
|
|
uint32_t unused;
|
|
} __packed;
|
|
|
|
|
|
#define IWX_TFD_QUEUE_SIZE_MAX (256)
|
|
#define IWX_TFD_QUEUE_SIZE_MAX_GEN3 (65536)
|
|
/* cb size is the exponent - 3 */
|
|
#define IWX_TFD_QUEUE_CB_SIZE(x) (IWX_RX_QUEUE_CB_SIZE(x) - 3)
|
|
#define IWX_TFD_QUEUE_SIZE_BC_DUP (64)
|
|
#define IWX_TFD_QUEUE_BC_SIZE (IWX_TFD_QUEUE_SIZE_MAX + \
|
|
IWX_TFD_QUEUE_SIZE_BC_DUP)
|
|
#define IWX_TFD_QUEUE_BC_SIZE_GEN3_AX210 1024
|
|
#define IWX_TFD_QUEUE_BC_SIZE_GEN3_BZ (1024 * 4)
|
|
#define IWX_TFH_NUM_TBS 25
|
|
|
|
/**
|
|
* struct iwx_tfh_tb transmit buffer descriptor within transmit frame descriptor
|
|
*
|
|
* This structure contains dma address and length of transmission address
|
|
*
|
|
* @tb_len length of the tx buffer
|
|
* @addr 64 bits dma address
|
|
*/
|
|
struct iwx_tfh_tb {
|
|
uint16_t tb_len;
|
|
uint64_t addr;
|
|
} __packed;
|
|
|
|
/**
|
|
* Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
|
|
* Both driver and device share these circular buffers, each of which must be
|
|
* contiguous 256 TFDs.
|
|
* For pre 22000 HW it is 256 x 128 bytes-per-TFD = 32 KBytes
|
|
* For 22000 HW and on it is 256 x 256 bytes-per-TFD = 65 KBytes
|
|
*
|
|
* Each TFD contains pointer/size information for up to 25 data buffers
|
|
* in host DRAM. These buffers collectively contain the (one) frame described
|
|
* by the TFD. Each buffer must be a single contiguous block of memory within
|
|
* itself, but buffers may be scattered in host DRAM. Each buffer has max size
|
|
* of (4K - 4). The concatenates all of a TFD's buffers into a single
|
|
* Tx frame, up to 8 KBytes in size.
|
|
*
|
|
* A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
|
|
*/
|
|
|
|
/**
|
|
* struct iwx_tfh_tfd - Transmit Frame Descriptor (TFD)
|
|
* @ num_tbs 0-4 number of active tbs
|
|
* 5 -15 reserved
|
|
* @ tbs[25] transmit frame buffer descriptors
|
|
* @ __pad padding
|
|
*/
|
|
struct iwx_tfh_tfd {
|
|
uint16_t num_tbs;
|
|
struct iwx_tfh_tb tbs[IWX_TFH_NUM_TBS];
|
|
uint32_t __pad;
|
|
} __packed;
|
|
|
|
/* Fixed (non-configurable) rx data from phy */
|
|
|
|
/**
|
|
* struct iwx_agn_schedq_bc_tbl scheduler byte count table
|
|
* base physical address provided by IWX_SCD_DRAM_BASE_ADDR
|
|
* @tfd_offset 0-11 - tx command byte count
|
|
* 12-13 - number of 64 byte chunks
|
|
* 14-15 - reserved
|
|
*/
|
|
struct iwx_agn_scd_bc_tbl {
|
|
uint16_t tfd_offset[IWX_TFD_QUEUE_BC_SIZE];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_gen3_bc_tbl_entry scheduler byte count table entry gen3
|
|
* For AX210 and up, the table no longer needs to be contiguous in memory.
|
|
* @tfd_offset: 0-13 - tx command byte count
|
|
* 14-15 - number of 64 byte chunks
|
|
*/
|
|
struct iwx_gen3_bc_tbl_entry {
|
|
uint16_t tfd_offset;
|
|
} __packed;
|
|
|
|
/**
|
|
* DQA - Dynamic Queue Allocation -introduction
|
|
*
|
|
* Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi
|
|
* to allow dynamic allocation of queues on-demand, rather than allocate them
|
|
* statically ahead of time. Ideally, we would like to allocate one queue
|
|
* per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2
|
|
* even if it also needs to send traffic to a sleeping STA1, without being
|
|
* blocked by the sleeping station.
|
|
*
|
|
* Although the queues in DQA mode are dynamically allocated, there are still
|
|
* some queues that are statically allocated:
|
|
* TXQ #0 - command queue
|
|
* TXQ #1 - aux frames
|
|
*/
|
|
|
|
/* static DQA Tx queue numbers */
|
|
#define IWX_DQA_CMD_QUEUE 0
|
|
#define IWX_DQA_AUX_QUEUE 1
|
|
|
|
#define IWX_DQA_INJECT_MONITOR_QUEUE 2 /* used in monitor mode only */
|
|
#define IWX_DQA_MGMT_QUEUE 1 /* default queue other modes */
|
|
|
|
/* Reserve 8 DQA Tx queues for QoS data frames. */
|
|
#define IWX_MAX_TID_COUNT 8
|
|
#define IWX_FIRST_AGG_TX_QUEUE (IWX_DQA_MGMT_QUEUE + 1)
|
|
#define IWX_LAST_AGG_TX_QUEUE (IWX_FIRST_AGG_TX_QUEUE + IWX_MAX_TID_COUNT - 1)
|
|
#define IWX_NUM_TX_QUEUES (IWX_LAST_AGG_TX_QUEUE + 1)
|
|
|
|
/**
|
|
* Max Tx window size is the max number of contiguous TFDs that the scheduler
|
|
* can keep track of at one time when creating block-ack chains of frames.
|
|
* Note that "64" matches the number of ack bits in a block-ack packet.
|
|
*/
|
|
#define IWX_FRAME_LIMIT 64
|
|
|
|
#define IWX_TX_FIFO_BK 0
|
|
#define IWX_TX_FIFO_BE 1
|
|
#define IWX_TX_FIFO_VI 2
|
|
#define IWX_TX_FIFO_VO 3
|
|
#define IWX_TX_FIFO_MCAST 5
|
|
#define IWX_TX_FIFO_CMD 7
|
|
|
|
enum iwx_gen2_tx_fifo {
|
|
IWX_GEN2_TX_FIFO_CMD = 0,
|
|
IWX_GEN2_EDCA_TX_FIFO_BK,
|
|
IWX_GEN2_EDCA_TX_FIFO_BE,
|
|
IWX_GEN2_EDCA_TX_FIFO_VI,
|
|
IWX_GEN2_EDCA_TX_FIFO_VO,
|
|
IWX_GEN2_TRIG_TX_FIFO_BK,
|
|
IWX_GEN2_TRIG_TX_FIFO_BE,
|
|
IWX_GEN2_TRIG_TX_FIFO_VI,
|
|
IWX_GEN2_TRIG_TX_FIFO_VO,
|
|
};
|
|
|
|
/**
|
|
* TXQ config options
|
|
* @TX_QUEUE_CFG_ENABLE_QUEUE: enable a queue
|
|
* @TX_QUEUE_CFG_TFD_SHORT_FORMAT: use short TFD format
|
|
*/
|
|
#define IWX_TX_QUEUE_CFG_ENABLE_QUEUE (1 << 0)
|
|
#define IWX_TX_QUEUE_CFG_TFD_SHORT_FORMAT (1 << 1)
|
|
|
|
#define IWX_DEFAULT_QUEUE_SIZE IWX_TFD_QUEUE_SIZE_MAX
|
|
|
|
/**
|
|
* struct iwx_tx_queue_cfg_cmd - txq hw scheduler config command
|
|
* @sta_id: station id
|
|
* @tid: tid of the queue
|
|
* @flags: see &enum iwl_tx_queue_cfg_actions
|
|
* @cb_size: size of TFD cyclic buffer. Value is exponent - 3.
|
|
* Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs)
|
|
* @byte_cnt_addr: address of byte count table
|
|
* @tfdq_addr: address of TFD circular buffer
|
|
*/
|
|
struct iwx_tx_queue_cfg_cmd {
|
|
uint8_t sta_id;
|
|
uint8_t tid;
|
|
uint16_t flags;
|
|
uint32_t cb_size;
|
|
uint64_t byte_cnt_addr;
|
|
uint64_t tfdq_addr;
|
|
} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_tx_queue_cfg_rsp - response to txq hw scheduler config
|
|
* @queue_number: queue number assigned to this RA -TID
|
|
* @flags: set on failure
|
|
* @write_pointer: initial value for write pointer
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_tx_queue_cfg_rsp {
|
|
uint16_t queue_number;
|
|
uint16_t flags;
|
|
uint16_t write_pointer;
|
|
uint16_t reserved;
|
|
} __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */
|
|
|
|
|
|
/*
|
|
* Commands
|
|
*/
|
|
#define IWX_ALIVE 0x1
|
|
#define IWX_REPLY_ERROR 0x2
|
|
#define IWX_INIT_COMPLETE_NOTIF 0x4
|
|
|
|
/* PHY context commands */
|
|
#define IWX_PHY_CONTEXT_CMD 0x8
|
|
#define IWX_DBG_CFG 0x9
|
|
|
|
/* UMAC scan commands */
|
|
#define IWX_SCAN_ITERATION_COMPLETE_UMAC 0xb5
|
|
#define IWX_SCAN_CFG_CMD 0xc
|
|
#define IWX_SCAN_REQ_UMAC 0xd
|
|
#define IWX_SCAN_ABORT_UMAC 0xe
|
|
#define IWX_SCAN_COMPLETE_UMAC 0xf
|
|
|
|
/* station table */
|
|
#define IWX_ADD_STA_KEY 0x17
|
|
#define IWX_ADD_STA 0x18
|
|
#define IWX_REMOVE_STA 0x19
|
|
|
|
/* TX */
|
|
#define IWX_TX_CMD 0x1c
|
|
#define IWX_TXPATH_FLUSH 0x1e
|
|
#define IWX_MGMT_MCAST_KEY 0x1f
|
|
|
|
/* scheduler config */
|
|
#define IWX_SCD_QUEUE_CFG 0x1d
|
|
|
|
/* global key */
|
|
#define IWX_WEP_KEY 0x20
|
|
|
|
/* MAC and Binding commands */
|
|
#define IWX_MAC_CONTEXT_CMD 0x28
|
|
#define IWX_TIME_EVENT_CMD 0x29 /* both CMD and response */
|
|
#define IWX_TIME_EVENT_NOTIFICATION 0x2a
|
|
#define IWX_BINDING_CONTEXT_CMD 0x2b
|
|
#define IWX_TIME_QUOTA_CMD 0x2c
|
|
#define IWX_NON_QOS_TX_COUNTER_CMD 0x2d
|
|
|
|
/* Calibration */
|
|
#define IWX_TEMPERATURE_NOTIFICATION 0x62
|
|
#define IWX_CALIBRATION_CFG_CMD 0x65
|
|
#define IWX_CALIBRATION_RES_NOTIFICATION 0x66
|
|
#define IWX_CALIBRATION_COMPLETE_NOTIFICATION 0x67
|
|
#define IWX_RADIO_VERSION_NOTIFICATION 0x68
|
|
|
|
/* Phy */
|
|
#define IWX_PHY_CONFIGURATION_CMD 0x6a
|
|
|
|
/* Power - legacy power table command */
|
|
#define IWX_POWER_TABLE_CMD 0x77
|
|
#define IWX_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION 0x78
|
|
#define IWX_LTR_CONFIG 0xee
|
|
|
|
/* NVM */
|
|
#define IWX_NVM_ACCESS_CMD 0x88
|
|
|
|
#define IWX_SET_CALIB_DEFAULT_CMD 0x8e
|
|
|
|
#define IWX_BEACON_NOTIFICATION 0x90
|
|
#define IWX_BEACON_TEMPLATE_CMD 0x91
|
|
#define IWX_TX_ANT_CONFIGURATION_CMD 0x98
|
|
#define IWX_BT_CONFIG 0x9b
|
|
#define IWX_STATISTICS_CMD 0x9c
|
|
#define IWX_STATISTICS_NOTIFICATION 0x9d
|
|
#define IWX_REDUCE_TX_POWER_CMD 0x9f
|
|
|
|
/* RF-KILL commands and notifications */
|
|
#define IWX_CARD_STATE_CMD 0xa0
|
|
#define IWX_CARD_STATE_NOTIFICATION 0xa1
|
|
|
|
#define IWX_MISSED_BEACONS_NOTIFICATION 0xa2
|
|
|
|
#define IWX_MFUART_LOAD_NOTIFICATION 0xb1
|
|
|
|
/* Power - new power table command */
|
|
#define IWX_MAC_PM_POWER_TABLE 0xa9
|
|
|
|
#define IWX_REPLY_RX_PHY_CMD 0xc0
|
|
#define IWX_REPLY_RX_MPDU_CMD 0xc1
|
|
#define IWX_BAR_FRAME_RELEASE 0xc2
|
|
#define IWX_FRAME_RELEASE 0xc3
|
|
#define IWX_BA_NOTIF 0xc5
|
|
|
|
/* Location Aware Regulatory */
|
|
#define IWX_MCC_UPDATE_CMD 0xc8
|
|
#define IWX_MCC_CHUB_UPDATE_CMD 0xc9
|
|
|
|
/* BT Coex */
|
|
#define IWX_BT_COEX_PRIO_TABLE 0xcc
|
|
#define IWX_BT_COEX_PROT_ENV 0xcd
|
|
#define IWX_BT_PROFILE_NOTIFICATION 0xce
|
|
#define IWX_BT_COEX_CI 0x5d
|
|
|
|
#define IWX_REPLY_SF_CFG_CMD 0xd1
|
|
#define IWX_REPLY_BEACON_FILTERING_CMD 0xd2
|
|
|
|
/* DTS measurements */
|
|
#define IWX_CMD_DTS_MEASUREMENT_TRIGGER 0xdc
|
|
#define IWX_DTS_MEASUREMENT_NOTIFICATION 0xdd
|
|
|
|
#define IWX_REPLY_DEBUG_CMD 0xf0
|
|
#define IWX_DEBUG_LOG_MSG 0xf7
|
|
|
|
#define IWX_MCAST_FILTER_CMD 0xd0
|
|
|
|
/* D3 commands/notifications */
|
|
#define IWX_D3_CONFIG_CMD 0xd3
|
|
#define IWX_PROT_OFFLOAD_CONFIG_CMD 0xd4
|
|
#define IWX_OFFLOADS_QUERY_CMD 0xd5
|
|
#define IWX_REMOTE_WAKE_CONFIG_CMD 0xd6
|
|
|
|
/* for WoWLAN in particular */
|
|
#define IWX_WOWLAN_PATTERNS 0xe0
|
|
#define IWX_WOWLAN_CONFIGURATION 0xe1
|
|
#define IWX_WOWLAN_TSC_RSC_PARAM 0xe2
|
|
#define IWX_WOWLAN_TKIP_PARAM 0xe3
|
|
#define IWX_WOWLAN_KEK_KCK_MATERIAL 0xe4
|
|
#define IWX_WOWLAN_GET_STATUSES 0xe5
|
|
#define IWX_WOWLAN_TX_POWER_PER_DB 0xe6
|
|
|
|
/* and for NetDetect */
|
|
#define IWX_NET_DETECT_CONFIG_CMD 0x54
|
|
#define IWX_NET_DETECT_PROFILES_QUERY_CMD 0x56
|
|
#define IWX_NET_DETECT_PROFILES_CMD 0x57
|
|
#define IWX_NET_DETECT_HOTSPOTS_CMD 0x58
|
|
#define IWX_NET_DETECT_HOTSPOTS_QUERY_CMD 0x59
|
|
|
|
/* system group command IDs */
|
|
#define IWX_FSEQ_VER_MISMATCH_NOTIFICATION 0xff
|
|
|
|
#define IWX_REPLY_MAX 0xff
|
|
|
|
/* PHY_OPS subcommand IDs */
|
|
#define IWX_CMD_DTS_MEASUREMENT_TRIGGER_WIDE 0x0
|
|
#define IWX_CTDP_CONFIG_CMD 0x03
|
|
#define IWX_TEMP_REPORTING_THRESHOLDS_CMD 0x04
|
|
#define IWX_CT_KILL_NOTIFICATION 0xFE
|
|
#define IWX_DTS_MEASUREMENT_NOTIF_WIDE 0xFF
|
|
|
|
/* command groups */
|
|
#define IWX_LEGACY_GROUP 0x0
|
|
#define IWX_LONG_GROUP 0x1
|
|
#define IWX_SYSTEM_GROUP 0x2
|
|
#define IWX_MAC_CONF_GROUP 0x3
|
|
#define IWX_PHY_OPS_GROUP 0x4
|
|
#define IWX_DATA_PATH_GROUP 0x5
|
|
#define IWX_PROT_OFFLOAD_GROUP 0xb
|
|
#define IWX_REGULATORY_AND_NVM_GROUP 0xc
|
|
|
|
/* SYSTEM_GROUP group subcommand IDs */
|
|
|
|
#define IWX_SHARED_MEM_CFG_CMD 0x00
|
|
#define IWX_SOC_CONFIGURATION_CMD 0x01
|
|
#define IWX_INIT_EXTENDED_CFG_CMD 0x03
|
|
#define IWX_FW_ERROR_RECOVERY_CMD 0x07
|
|
|
|
/* MAC_CONF group subcommand IDs */
|
|
#define IWX_SESSION_PROTECTION_CMD 0x05
|
|
#define IWX_SESSION_PROTECTION_NOTIF 0xfb
|
|
|
|
/* DATA_PATH group subcommand IDs */
|
|
#define IWX_DQA_ENABLE_CMD 0x00
|
|
#define IWX_RLC_CONFIG_CMD 0x08
|
|
#define IWX_TLC_MNG_CONFIG_CMD 0x0f
|
|
#define IWX_RX_BAID_ALLOCATION_CONFIG_CMD 0x16
|
|
#define IWX_SCD_QUEUE_CONFIG_CMD 0x17
|
|
#define IWX_RX_NO_DATA_NOTIF 0xf5
|
|
#define IWX_TLC_MNG_UPDATE_NOTIF 0xf7
|
|
|
|
/* REGULATORY_AND_NVM group subcommand IDs */
|
|
#define IWX_NVM_ACCESS_COMPLETE 0x00
|
|
#define IWX_NVM_GET_INFO 0x02
|
|
#define IWX_NVM_GET_INFO 0x02
|
|
#define IWX_PNVM_INIT_COMPLETE 0xfe
|
|
|
|
/*
|
|
* struct iwx_dqa_enable_cmd
|
|
* @cmd_queue: the TXQ number of the command queue
|
|
*/
|
|
struct iwx_dqa_enable_cmd {
|
|
uint32_t cmd_queue;
|
|
} __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_cmd_response - generic response struct for most commands
|
|
* @status: status of the command asked, changes for each one
|
|
*/
|
|
struct iwx_cmd_response {
|
|
uint32_t status;
|
|
};
|
|
|
|
/*
|
|
* struct iwx_tx_ant_cfg_cmd
|
|
* @valid: valid antenna configuration
|
|
*/
|
|
struct iwx_tx_ant_cfg_cmd {
|
|
uint32_t valid;
|
|
} __packed;
|
|
|
|
/*
|
|
* Calibration control struct.
|
|
* Sent as part of the phy configuration command.
|
|
* @flow_trigger: bitmap for which calibrations to perform according to
|
|
* flow triggers.
|
|
* @event_trigger: bitmap for which calibrations to perform according to
|
|
* event triggers.
|
|
*/
|
|
struct iwx_calib_ctrl {
|
|
uint32_t flow_trigger;
|
|
uint32_t event_trigger;
|
|
} __packed;
|
|
|
|
/* This defines the bitmap of various calibrations to enable in both
|
|
* init ucode and runtime ucode through IWX_CALIBRATION_CFG_CMD.
|
|
*/
|
|
#define IWX_CALIB_CFG_XTAL_IDX (1 << 0)
|
|
#define IWX_CALIB_CFG_TEMPERATURE_IDX (1 << 1)
|
|
#define IWX_CALIB_CFG_VOLTAGE_READ_IDX (1 << 2)
|
|
#define IWX_CALIB_CFG_PAPD_IDX (1 << 3)
|
|
#define IWX_CALIB_CFG_TX_PWR_IDX (1 << 4)
|
|
#define IWX_CALIB_CFG_DC_IDX (1 << 5)
|
|
#define IWX_CALIB_CFG_BB_FILTER_IDX (1 << 6)
|
|
#define IWX_CALIB_CFG_LO_LEAKAGE_IDX (1 << 7)
|
|
#define IWX_CALIB_CFG_TX_IQ_IDX (1 << 8)
|
|
#define IWX_CALIB_CFG_TX_IQ_SKEW_IDX (1 << 9)
|
|
#define IWX_CALIB_CFG_RX_IQ_IDX (1 << 10)
|
|
#define IWX_CALIB_CFG_RX_IQ_SKEW_IDX (1 << 11)
|
|
#define IWX_CALIB_CFG_SENSITIVITY_IDX (1 << 12)
|
|
#define IWX_CALIB_CFG_CHAIN_NOISE_IDX (1 << 13)
|
|
#define IWX_CALIB_CFG_DISCONNECTED_ANT_IDX (1 << 14)
|
|
#define IWX_CALIB_CFG_ANT_COUPLING_IDX (1 << 15)
|
|
#define IWX_CALIB_CFG_DAC_IDX (1 << 16)
|
|
#define IWX_CALIB_CFG_ABS_IDX (1 << 17)
|
|
#define IWX_CALIB_CFG_AGC_IDX (1 << 18)
|
|
|
|
/*
|
|
* Phy configuration command.
|
|
*/
|
|
struct iwx_phy_cfg_cmd {
|
|
uint32_t phy_cfg;
|
|
struct iwx_calib_ctrl calib_control;
|
|
} __packed;
|
|
|
|
#define IWX_PHY_CFG_RADIO_TYPE ((1 << 0) | (1 << 1))
|
|
#define IWX_PHY_CFG_RADIO_STEP ((1 << 2) | (1 << 3))
|
|
#define IWX_PHY_CFG_RADIO_DASH ((1 << 4) | (1 << 5))
|
|
#define IWX_PHY_CFG_PRODUCT_NUMBER ((1 << 6) | (1 << 7))
|
|
#define IWX_PHY_CFG_TX_CHAIN_A (1 << 8)
|
|
#define IWX_PHY_CFG_TX_CHAIN_B (1 << 9)
|
|
#define IWX_PHY_CFG_TX_CHAIN_C (1 << 10)
|
|
#define IWX_PHY_CFG_RX_CHAIN_A (1 << 12)
|
|
#define IWX_PHY_CFG_RX_CHAIN_B (1 << 13)
|
|
#define IWX_PHY_CFG_RX_CHAIN_C (1 << 14)
|
|
|
|
#define IWX_MAX_DTS_TRIPS 8
|
|
|
|
/**
|
|
* struct iwx_ct_kill_notif - CT-kill entry notification
|
|
*
|
|
* @temperature: the current temperature in celsius
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_ct_kill_notif {
|
|
uint16_t temperature;
|
|
uint16_t reserved;
|
|
} __packed; /* GRP_PHY_CT_KILL_NTF */
|
|
|
|
/**
|
|
* struct iwx_temp_report_ths_cmd - set temperature thresholds
|
|
* (IWX_TEMP_REPORTING_THRESHOLDS_CMD)
|
|
*
|
|
* @num_temps: number of temperature thresholds passed
|
|
* @thresholds: array with the thresholds to be configured
|
|
*/
|
|
struct iwx_temp_report_ths_cmd {
|
|
uint32_t num_temps;
|
|
uint16_t thresholds[IWX_MAX_DTS_TRIPS];
|
|
} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
|
|
|
|
/*
|
|
* channel flags in NVM
|
|
* @IWX_NVM_CHANNEL_VALID: channel is usable for this SKU/geo
|
|
* @IWX_NVM_CHANNEL_IBSS: usable as an IBSS channel
|
|
* @IWX_NVM_CHANNEL_ACTIVE: active scanning allowed
|
|
* @IWX_NVM_CHANNEL_RADAR: radar detection required
|
|
* @IWX_NVM_CHANNEL_INDOOR_ONLY: only indoor use is allowed
|
|
* @IWX_NVM_CHANNEL_GO_CONCURRENT: GO operation is allowed when connected to BSS
|
|
* on same channel on 2.4 or same UNII band on 5.2
|
|
* @IWX_NVM_CHANNEL_DFS: dynamic freq selection candidate
|
|
* @IWX_NVM_CHANNEL_WIDE: 20 MHz channel okay (?)
|
|
* @IWX_NVM_CHANNEL_40MHZ: 40 MHz channel okay (?)
|
|
* @IWX_NVM_CHANNEL_80MHZ: 80 MHz channel okay (?)
|
|
* @IWX_NVM_CHANNEL_160MHZ: 160 MHz channel okay (?)
|
|
* @IWX_NVM_CHANNEL_DC_HIGH: DC HIGH required/allowed (?)
|
|
*/
|
|
#define IWX_NVM_CHANNEL_VALID (1 << 0)
|
|
#define IWX_NVM_CHANNEL_IBSS (1 << 1)
|
|
#define IWX_NVM_CHANNEL_ACTIVE (1 << 3)
|
|
#define IWX_NVM_CHANNEL_RADAR (1 << 4)
|
|
#define IWX_NVM_CHANNEL_INDOOR_ONLY (1 << 5)
|
|
#define IWX_NVM_CHANNEL_GO_CONCURRENT (1 << 6)
|
|
#define IWX_NVM_CHANNEL_DFS (1 << 7)
|
|
#define IWX_NVM_CHANNEL_WIDE (1 << 8)
|
|
#define IWX_NVM_CHANNEL_40MHZ (1 << 9)
|
|
#define IWX_NVM_CHANNEL_80MHZ (1 << 10)
|
|
#define IWX_NVM_CHANNEL_160MHZ (1 << 11)
|
|
#define IWX_NVM_CHANNEL_DC_HIGH (1 << 12)
|
|
|
|
/**
|
|
* struct iwx_nvm_access_complete_cmd - NVM_ACCESS commands are completed
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_nvm_access_complete_cmd {
|
|
uint32_t reserved;
|
|
} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */
|
|
|
|
/*
|
|
* struct iwx_nvm_get_info - request to get NVM data
|
|
*/
|
|
struct iwx_nvm_get_info {
|
|
uint32_t reserved;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* enum iwx_nvm_info_general_flags - flags in NVM_GET_INFO resp
|
|
* @NVM_GENERAL_FLAGS_EMPTY_OTP: 1 if OTP is empty
|
|
*/
|
|
#define IWX_NVM_GENERAL_FLAGS_EMPTY_OTP (1 << 0)
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_general - general NVM data
|
|
* @flags: bit 0: 1 - empty, 0 - non-empty
|
|
* @nvm_version: nvm version
|
|
* @board_type: board type
|
|
* @n_hw_addrs: number of reserved MAC addresses
|
|
*/
|
|
struct iwx_nvm_get_info_general {
|
|
uint32_t flags;
|
|
uint16_t nvm_version;
|
|
uint8_t board_type;
|
|
uint8_t n_hw_addrs;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_GENERAL_S_VER_2 */
|
|
|
|
/**
|
|
* iwx_nvm_mac_sku_flags - flags in &iwl_nvm_get_info_sku
|
|
* @NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED: true if 2.4 band enabled
|
|
* @NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED: true if 5.2 band enabled
|
|
* @NVM_MAC_SKU_FLAGS_802_11N_ENABLED: true if 11n enabled
|
|
* @NVM_MAC_SKU_FLAGS_802_11AC_ENABLED: true if 11ac enabled
|
|
* @NVM_MAC_SKU_FLAGS_802_11AX_ENABLED: true if 11ax enabled
|
|
* @NVM_MAC_SKU_FLAGS_MIMO_DISABLED: true if MIMO disabled
|
|
* @NVM_MAC_SKU_FLAGS_WAPI_ENABLED: true if WAPI enabled
|
|
* @NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED: true if regulatory checker enabled
|
|
* @NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED: true if API lock enabled
|
|
*/
|
|
#define IWX_NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED (1 << 0)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED (1 << 1)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_802_11N_ENABLED (1 << 2)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_802_11AC_ENABLED (1 << 3)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_802_11AX_ENABLED (1 << 4)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_MIMO_DISABLED (1 << 5)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_WAPI_ENABLED (1 << 8)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED (1 << 14)
|
|
#define IWX_NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED (1 << 15)
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_sku - mac information
|
|
* @mac_sku_flags: flags for SKU, see &enum iwl_nvm_mac_sku_flags
|
|
*/
|
|
struct iwx_nvm_get_info_sku {
|
|
uint32_t mac_sku_flags;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_phy - phy information
|
|
* @tx_chains: BIT 0 chain A, BIT 1 chain B
|
|
* @rx_chains: BIT 0 chain A, BIT 1 chain B
|
|
*/
|
|
struct iwx_nvm_get_info_phy {
|
|
uint32_t tx_chains;
|
|
uint32_t rx_chains;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */
|
|
|
|
#define IWX_NUM_CHANNELS_V1 51
|
|
#define IWX_NUM_CHANNELS 110
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_regulatory - regulatory information
|
|
* @lar_enabled: is LAR enabled
|
|
* @channel_profile: regulatory data of this channel
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_nvm_get_info_regulatory_v1 {
|
|
uint32_t lar_enabled;
|
|
uint16_t channel_profile[IWX_NUM_CHANNELS_V1];
|
|
uint16_t reserved;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_regulatory - regulatory information
|
|
* @lar_enabled: is LAR enabled
|
|
* @n_channels: number of valid channels in the array
|
|
* @channel_profile: regulatory data of this channel
|
|
*/
|
|
struct iwx_nvm_get_info_regulatory {
|
|
uint32_t lar_enabled;
|
|
uint32_t n_channels;
|
|
uint32_t channel_profile[IWX_NUM_CHANNELS];
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_rsp_v3 - response to get NVM data
|
|
* @general: general NVM data
|
|
* @mac_sku: data relating to MAC sku
|
|
* @phy_sku: data relating to PHY sku
|
|
* @regulatory: regulatory data
|
|
*/
|
|
struct iwx_nvm_get_info_rsp_v3 {
|
|
struct iwx_nvm_get_info_general general;
|
|
struct iwx_nvm_get_info_sku mac_sku;
|
|
struct iwx_nvm_get_info_phy phy_sku;
|
|
struct iwx_nvm_get_info_regulatory_v1 regulatory;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_3 */
|
|
|
|
/**
|
|
* struct iwx_nvm_get_info_rsp - response to get NVM data
|
|
* @general: general NVM data
|
|
* @mac_sku: data relating to MAC sku
|
|
* @phy_sku: data relating to PHY sku
|
|
* @regulatory: regulatory data
|
|
*/
|
|
struct iwx_nvm_get_info_rsp {
|
|
struct iwx_nvm_get_info_general general;
|
|
struct iwx_nvm_get_info_sku mac_sku;
|
|
struct iwx_nvm_get_info_phy phy_sku;
|
|
struct iwx_nvm_get_info_regulatory regulatory;
|
|
} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4 */
|
|
|
|
|
|
#define IWX_ALIVE_STATUS_ERR 0xDEAD
|
|
#define IWX_ALIVE_STATUS_OK 0xCAFE
|
|
|
|
struct iwx_lmac_debug_addrs {
|
|
uint32_t error_event_table_ptr; /* SRAM address for error log */
|
|
uint32_t log_event_table_ptr; /* SRAM address for LMAC event log */
|
|
uint32_t cpu_register_ptr;
|
|
uint32_t dbgm_config_ptr;
|
|
uint32_t alive_counter_ptr;
|
|
uint32_t scd_base_ptr; /* SRAM address for SCD */
|
|
uint32_t st_fwrd_addr; /* pointer to Store and forward */
|
|
uint32_t st_fwrd_size;
|
|
} __packed; /* UCODE_DEBUG_ADDRS_API_S_VER_2 */
|
|
|
|
struct iwx_lmac_alive {
|
|
uint32_t ucode_major;
|
|
uint32_t ucode_minor;
|
|
uint8_t ver_subtype;
|
|
uint8_t ver_type;
|
|
uint8_t mac;
|
|
uint8_t opt;
|
|
uint32_t timestamp;
|
|
struct iwx_lmac_debug_addrs dbg_ptrs;
|
|
} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_3 */
|
|
|
|
struct iwx_umac_debug_addrs {
|
|
uint32_t error_info_addr; /* SRAM address for UMAC error log */
|
|
uint32_t dbg_print_buff_addr;
|
|
} __packed; /* UMAC_DEBUG_ADDRS_API_S_VER_1 */
|
|
|
|
struct iwx_umac_alive {
|
|
uint32_t umac_major; /* UMAC version: major */
|
|
uint32_t umac_minor; /* UMAC version: minor */
|
|
struct iwx_umac_debug_addrs dbg_ptrs;
|
|
} __packed; /* UMAC_ALIVE_DATA_API_S_VER_2 */
|
|
|
|
struct iwx_alive_resp_v4 {
|
|
uint16_t status;
|
|
uint16_t flags;
|
|
struct iwx_lmac_alive lmac_data[2];
|
|
struct iwx_umac_alive umac_data;
|
|
} __packed; /* ALIVE_RES_API_S_VER_4 */
|
|
|
|
struct iwx_sku_id {
|
|
uint32_t data[3];
|
|
} __packed; /* SKU_ID_API_S_VER_1 */
|
|
|
|
struct iwx_alive_resp_v5 {
|
|
uint16_t status;
|
|
uint16_t flags;
|
|
struct iwx_lmac_alive lmac_data[2];
|
|
struct iwx_umac_alive umac_data;
|
|
struct iwx_sku_id sku_id;
|
|
} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_5 */
|
|
|
|
struct iwx_imr_alive_info {
|
|
uint64_t base_addr;
|
|
uint32_t size;
|
|
uint32_t enabled;
|
|
} __packed; /* IMR_ALIVE_INFO_API_S_VER_1 */
|
|
|
|
struct iwx_alive_resp_v6 {
|
|
uint16_t status;
|
|
uint16_t flags;
|
|
struct iwx_lmac_alive lmac_data[2];
|
|
struct iwx_umac_alive umac_data;
|
|
struct iwx_sku_id sku_id;
|
|
struct iwx_imr_alive_info imr;
|
|
} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_6 */
|
|
|
|
|
|
#define IWX_SOC_CONFIG_CMD_FLAGS_DISCRETE (1 << 0)
|
|
#define IWX_SOC_CONFIG_CMD_FLAGS_LOW_LATENCY (1 << 1)
|
|
|
|
#define IWX_SOC_FLAGS_LTR_APPLY_DELAY_MASK 0xc
|
|
#define IWX_SOC_FLAGS_LTR_APPLY_DELAY_NONE 0
|
|
#define IWX_SOC_FLAGS_LTR_APPLY_DELAY_200 1
|
|
#define IWX_SOC_FLAGS_LTR_APPLY_DELAY_2500 2
|
|
#define IWX_SOC_FLAGS_LTR_APPLY_DELAY_1820 3
|
|
|
|
/**
|
|
* struct iwx_soc_configuration_cmd - Set device stabilization latency
|
|
*
|
|
* @flags: soc settings flags. In VER_1, we can only set the DISCRETE
|
|
* flag, because the FW treats the whole value as an integer. In
|
|
* VER_2, we can set the bits independently.
|
|
* @latency: time for SOC to ensure stable power & XTAL
|
|
*/
|
|
struct iwx_soc_configuration_cmd {
|
|
uint32_t flags;
|
|
uint32_t latency;
|
|
} __packed; /*
|
|
* SOC_CONFIGURATION_CMD_S_VER_1 (see description above)
|
|
* SOC_CONFIGURATION_CMD_S_VER_2
|
|
*/
|
|
|
|
/**
|
|
* commands driver may send before finishing init flow
|
|
* @IWX_INIT_DEBUG_CFG: driver is going to send debug config command
|
|
* @IWX_INIT_NVM: driver is going to send NVM_ACCESS commands
|
|
*/
|
|
#define IWX_INIT_DEBUG_CFG (1 << 0)
|
|
#define IWX_INIT_NVM (1 << 1)
|
|
|
|
/**
|
|
* struct iwx_extended_cfg_cmd - mark what commands ucode should wait for
|
|
* before finishing init flows
|
|
* @init_flags: IWX_INIT_* flag bits
|
|
*/
|
|
struct iwx_init_extended_cfg_cmd {
|
|
uint32_t init_flags;
|
|
} __packed; /* INIT_EXTENDED_CFG_CMD_API_S_VER_1 */
|
|
|
|
/* Error response/notification */
|
|
#define IWX_FW_ERR_UNKNOWN_CMD 0x0
|
|
#define IWX_FW_ERR_INVALID_CMD_PARAM 0x1
|
|
#define IWX_FW_ERR_SERVICE 0x2
|
|
#define IWX_FW_ERR_ARC_MEMORY 0x3
|
|
#define IWX_FW_ERR_ARC_CODE 0x4
|
|
#define IWX_FW_ERR_WATCH_DOG 0x5
|
|
#define IWX_FW_ERR_WEP_GRP_KEY_INDX 0x10
|
|
#define IWX_FW_ERR_WEP_KEY_SIZE 0x11
|
|
#define IWX_FW_ERR_OBSOLETE_FUNC 0x12
|
|
#define IWX_FW_ERR_UNEXPECTED 0xFE
|
|
#define IWX_FW_ERR_FATAL 0xFF
|
|
|
|
/**
|
|
* struct iwx_error_resp - FW error indication
|
|
* ( IWX_REPLY_ERROR = 0x2 )
|
|
* @error_type: one of IWX_FW_ERR_*
|
|
* @cmd_id: the command ID for which the error occurred
|
|
* @bad_cmd_seq_num: sequence number of the erroneous command
|
|
* @error_service: which service created the error, applicable only if
|
|
* error_type = 2, otherwise 0
|
|
* @timestamp: TSF in usecs.
|
|
*/
|
|
struct iwx_error_resp {
|
|
uint32_t error_type;
|
|
uint8_t cmd_id;
|
|
uint8_t reserved1;
|
|
uint16_t bad_cmd_seq_num;
|
|
uint32_t error_service;
|
|
uint64_t timestamp;
|
|
} __packed;
|
|
|
|
enum iwx_fw_dbg_reg_operator {
|
|
CSR_ASSIGN,
|
|
CSR_SETBIT,
|
|
CSR_CLEARBIT,
|
|
|
|
PRPH_ASSIGN,
|
|
PRPH_SETBIT,
|
|
PRPH_CLEARBIT,
|
|
|
|
INDIRECT_ASSIGN,
|
|
INDIRECT_SETBIT,
|
|
INDIRECT_CLEARBIT,
|
|
|
|
PRPH_BLOCKBIT,
|
|
};
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_reg_op - an operation on a register
|
|
*
|
|
* @op: &enum iwx_fw_dbg_reg_operator
|
|
* @addr: offset of the register
|
|
* @val: value
|
|
*/
|
|
struct iwx_fw_dbg_reg_op {
|
|
uint8_t op;
|
|
uint8_t reserved[3];
|
|
uint32_t addr;
|
|
uint32_t val;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum iwx_fw_dbg_monitor_mode - available monitor recording modes
|
|
*
|
|
* @SMEM_MODE: monitor stores the data in SMEM
|
|
* @EXTERNAL_MODE: monitor stores the data in allocated DRAM
|
|
* @MARBH_MODE: monitor stores the data in MARBH buffer
|
|
* @MIPI_MODE: monitor outputs the data through the MIPI interface
|
|
*/
|
|
enum iwx_fw_dbg_monitor_mode {
|
|
SMEM_MODE = 0,
|
|
EXTERNAL_MODE = 1,
|
|
MARBH_MODE = 2,
|
|
MIPI_MODE = 3,
|
|
};
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_mem_seg_tlv - configures the debug data memory segments
|
|
*
|
|
* @data_type: the memory segment type to record
|
|
* @ofs: the memory segment offset
|
|
* @len: the memory segment length, in bytes
|
|
*
|
|
* This parses IWX_UCODE_TLV_FW_MEM_SEG
|
|
*/
|
|
struct iwx_fw_dbg_mem_seg_tlv {
|
|
uint32_t data_type;
|
|
uint32_t ofs;
|
|
uint32_t len;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_dest_tlv_v1 - configures the destination of the debug data
|
|
*
|
|
* @version: version of the TLV - currently 0
|
|
* @monitor_mode: &enum iwx_fw_dbg_monitor_mode
|
|
* @size_power: buffer size will be 2^(size_power + 11)
|
|
* @base_reg: addr of the base addr register (PRPH)
|
|
* @end_reg: addr of the end addr register (PRPH)
|
|
* @write_ptr_reg: the addr of the reg of the write pointer
|
|
* @wrap_count: the addr of the reg of the wrap_count
|
|
* @base_shift: shift right of the base addr reg
|
|
* @end_shift: shift right of the end addr reg
|
|
* @reg_ops: array of registers operations
|
|
*
|
|
* This parses IWX_UCODE_TLV_FW_DBG_DEST
|
|
*/
|
|
struct iwx_fw_dbg_dest_tlv_v1 {
|
|
uint8_t version;
|
|
uint8_t monitor_mode;
|
|
uint8_t size_power;
|
|
uint8_t reserved;
|
|
uint32_t base_reg;
|
|
uint32_t end_reg;
|
|
uint32_t write_ptr_reg;
|
|
uint32_t wrap_count;
|
|
uint8_t base_shift;
|
|
uint8_t end_shift;
|
|
struct iwx_fw_dbg_reg_op reg_ops[0];
|
|
} __packed;
|
|
|
|
/* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */
|
|
#define IWX_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000
|
|
/* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */
|
|
#define IWX_LDBG_M2S_BUF_BA_MSK 0x00000fff
|
|
/* The smem buffer chunks are in units of 256 bits */
|
|
#define IWX_M2S_UNIT_SIZE 0x100
|
|
|
|
struct iwx_fw_dbg_dest_tlv {
|
|
uint8_t version;
|
|
uint8_t monitor_mode;
|
|
uint8_t size_power;
|
|
uint8_t reserved;
|
|
uint32_t cfg_reg;
|
|
uint32_t write_ptr_reg;
|
|
uint32_t wrap_count;
|
|
uint8_t base_shift;
|
|
uint8_t size_shift;
|
|
struct iwx_fw_dbg_reg_op reg_ops[0];
|
|
} __packed;
|
|
|
|
struct iwx_fw_dbg_conf_hcmd {
|
|
uint8_t id;
|
|
uint8_t reserved;
|
|
uint16_t len;
|
|
uint8_t data[0];
|
|
} __packed;
|
|
|
|
/**
|
|
* enum iwx_fw_dbg_trigger_mode - triggers functionalities
|
|
*
|
|
* @IWX_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
|
|
* @IWX_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
|
|
* @IWX_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
|
|
* collect only monitor data
|
|
*/
|
|
enum iwx_fw_dbg_trigger_mode {
|
|
IWX_FW_DBG_TRIGGER_START = (1 << 0),
|
|
IWX_FW_DBG_TRIGGER_STOP = (1 << 1),
|
|
IWX_FW_DBG_TRIGGER_MONITOR_ONLY = (1 << 2),
|
|
};
|
|
|
|
/**
|
|
* enum iwx_fw_dbg_trigger_flags - the flags supported by wrt triggers
|
|
* @IWX_FW_DBG_FORCE_RESTART: force a firmware restart
|
|
*/
|
|
enum iwx_fw_dbg_trigger_flags {
|
|
IWX_FW_DBG_FORCE_RESTART = (1 << 0),
|
|
};
|
|
|
|
/**
|
|
* enum iwx_fw_dbg_trigger_vif_type - define the VIF type for a trigger
|
|
* @IWX_FW_DBG_CONF_VIF_ANY: any vif type
|
|
* @IWX_FW_DBG_CONF_VIF_IBSS: IBSS mode
|
|
* @IWX_FW_DBG_CONF_VIF_STATION: BSS mode
|
|
* @IWX_FW_DBG_CONF_VIF_AP: AP mode
|
|
* @IWX_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
|
|
* @IWX_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
|
|
* @IWX_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
|
|
* @IWX_FW_DBG_CONF_VIF_NAN: NAN device
|
|
*/
|
|
enum iwx_fw_dbg_trigger_vif_type {
|
|
IWX_FW_DBG_CONF_VIF_ANY = 0,
|
|
IWX_FW_DBG_CONF_VIF_IBSS = 1,
|
|
IWX_FW_DBG_CONF_VIF_STATION = 2,
|
|
IWX_FW_DBG_CONF_VIF_AP = 3,
|
|
IWX_FW_DBG_CONF_VIF_P2P_CLIENT = 8,
|
|
IWX_FW_DBG_CONF_VIF_P2P_GO = 9,
|
|
IWX_FW_DBG_CONF_VIF_P2P_DEVICE = 10,
|
|
IWX_FW_DBG_CONF_VIF_NAN = 12,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_fw_dbg_trigger - triggers available
|
|
*
|
|
* @FW_DBG_TRIGGER_USER: trigger log collection by user
|
|
* This should not be defined as a trigger to the driver, but a value the
|
|
* driver should set to indicate that the trigger was initiated by the
|
|
* user.
|
|
* @FW_DBG_TRIGGER_FW_ASSERT: trigger log collection when the firmware asserts
|
|
* @FW_DBG_TRIGGER_MISSED_BEACONS: trigger log collection when beacons are
|
|
* missed.
|
|
* @FW_DBG_TRIGGER_CHANNEL_SWITCH: trigger log collection upon channel switch.
|
|
* @FW_DBG_TRIGGER_FW_NOTIF: trigger log collection when the firmware sends a
|
|
* command response or a notification.
|
|
* @FW_DBG_TRIGGER_MLME: trigger log collection upon MLME event.
|
|
* @FW_DBG_TRIGGER_STATS: trigger log collection upon statistics threshold.
|
|
* @FW_DBG_TRIGGER_RSSI: trigger log collection when the rssi of the beacon
|
|
* goes below a threshold.
|
|
* @FW_DBG_TRIGGER_TXQ_TIMERS: configures the timers for the Tx queue hang
|
|
* detection.
|
|
* @FW_DBG_TRIGGER_TIME_EVENT: trigger log collection upon time events related
|
|
* events.
|
|
* @FW_DBG_TRIGGER_BA: trigger log collection upon BlockAck related events.
|
|
* @FW_DBG_TX_LATENCY: trigger log collection when the tx latency goes above a
|
|
* threshold.
|
|
* @FW_DBG_TDLS: trigger log collection upon TDLS related events.
|
|
* @FW_DBG_TRIGGER_TX_STATUS: trigger log collection upon tx status when
|
|
* the firmware sends a tx reply.
|
|
* @FW_DBG_TRIGGER_USER_EXTENDED: trigger log collection upon user space
|
|
* request.
|
|
* @FW_DBG_TRIGGER_ALIVE_TIMEOUT: trigger log collection if alive flow timeouts
|
|
* @FW_DBG_TRIGGER_DRIVER: trigger log collection upon a flow failure
|
|
* in the driver.
|
|
*/
|
|
enum iwx_fw_dbg_trigger {
|
|
IWX_FW_DBG_TRIGGER_INVALID = 0,
|
|
IWX_FW_DBG_TRIGGER_USER,
|
|
IWX_FW_DBG_TRIGGER_FW_ASSERT,
|
|
IWX_FW_DBG_TRIGGER_MISSED_BEACONS,
|
|
IWX_FW_DBG_TRIGGER_CHANNEL_SWITCH,
|
|
IWX_FW_DBG_TRIGGER_FW_NOTIF,
|
|
IWX_FW_DBG_TRIGGER_MLME,
|
|
IWX_FW_DBG_TRIGGER_STATS,
|
|
IWX_FW_DBG_TRIGGER_RSSI,
|
|
IWX_FW_DBG_TRIGGER_TXQ_TIMERS,
|
|
IWX_FW_DBG_TRIGGER_TIME_EVENT,
|
|
IWX_FW_DBG_TRIGGER_BA,
|
|
IWX_FW_DBG_TRIGGER_TX_LATENCY,
|
|
IWX_FW_DBG_TRIGGER_TDLS,
|
|
IWX_FW_DBG_TRIGGER_TX_STATUS,
|
|
IWX_FW_DBG_TRIGGER_USER_EXTENDED,
|
|
IWX_FW_DBG_TRIGGER_ALIVE_TIMEOUT,
|
|
IWX_FW_DBG_TRIGGER_DRIVER,
|
|
|
|
/* must be last */
|
|
IWX_FW_DBG_TRIGGER_MAX,
|
|
};
|
|
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_tlv - a TLV that describes the trigger
|
|
* @id: &enum iwx_fw_dbg_trigger
|
|
* @vif_type: &enum iwx_fw_dbg_trigger_vif_type
|
|
* @stop_conf_ids: bitmap of configurations this trigger relates to.
|
|
* if the mode is %IWX_FW_DBG_TRIGGER_STOP, then if the bit corresponding
|
|
* to the currently running configuration is set, the data should be
|
|
* collected.
|
|
* @stop_delay: how many milliseconds to wait before collecting the data
|
|
* after the STOP trigger fires.
|
|
* @mode: &enum iwx_fw_dbg_trigger_mode - can be stop / start of both
|
|
* @start_conf_id: if mode is %IWX_FW_DBG_TRIGGER_START, this defines what
|
|
* configuration should be applied when the triggers kicks in.
|
|
* @occurrences: number of occurrences. 0 means the trigger will never fire.
|
|
* @trig_dis_ms: the time, in milliseconds, after an occurrence of this
|
|
* trigger in which another occurrence should be ignored.
|
|
* @flags: &enum iwx_fw_dbg_trigger_flags
|
|
*/
|
|
struct iwx_fw_dbg_trigger_tlv {
|
|
uint32_t id;
|
|
uint32_t vif_type;
|
|
uint32_t stop_conf_ids;
|
|
uint32_t stop_delay;
|
|
uint8_t mode;
|
|
uint8_t start_conf_id;
|
|
uint16_t occurrences;
|
|
uint16_t trig_dis_ms;
|
|
uint8_t flags;
|
|
uint8_t reserved[5];
|
|
|
|
uint8_t data[0];
|
|
} __packed;
|
|
|
|
#define IWX_FW_DBG_START_FROM_ALIVE 0
|
|
#define IWX_FW_DBG_CONF_MAX 32
|
|
#define IWX_FW_DBG_INVALID 0xff
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
|
|
* @stop_consec_missed_bcon: stop recording if threshold is crossed.
|
|
* @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
|
|
* @start_consec_missed_bcon: start recording if threshold is crossed.
|
|
* @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
|
|
* @reserved1: reserved
|
|
* @reserved2: reserved
|
|
*/
|
|
struct iwx_fw_dbg_trigger_missed_bcon {
|
|
uint32_t stop_consec_missed_bcon;
|
|
uint32_t stop_consec_missed_bcon_since_rx;
|
|
uint32_t reserved2[2];
|
|
uint32_t start_consec_missed_bcon;
|
|
uint32_t start_consec_missed_bcon_since_rx;
|
|
uint32_t reserved1[2];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_cmd - configures trigger for messages from FW.
|
|
* cmds: the list of commands to trigger the collection on
|
|
*/
|
|
struct iwx_fw_dbg_trigger_cmd {
|
|
struct cmd {
|
|
uint8_t cmd_id;
|
|
uint8_t group_id;
|
|
} __packed cmds[16];
|
|
} __packed;
|
|
|
|
/**
|
|
* iwx_fw_dbg_trigger_stats - configures trigger for statistics
|
|
* @stop_offset: the offset of the value to be monitored
|
|
* @stop_threshold: the threshold above which to collect
|
|
* @start_offset: the offset of the value to be monitored
|
|
* @start_threshold: the threshold above which to start recording
|
|
*/
|
|
struct iwx_fw_dbg_trigger_stats {
|
|
uint32_t stop_offset;
|
|
uint32_t stop_threshold;
|
|
uint32_t start_offset;
|
|
uint32_t start_threshold;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
|
|
* @rssi: RSSI value to trigger at
|
|
*/
|
|
struct iwx_fw_dbg_trigger_low_rssi {
|
|
uint32_t rssi;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_mlme - configures trigger for mlme events
|
|
* @stop_auth_denied: number of denied authentication to collect
|
|
* @stop_auth_timeout: number of authentication timeout to collect
|
|
* @stop_rx_deauth: number of Rx deauth before to collect
|
|
* @stop_tx_deauth: number of Tx deauth before to collect
|
|
* @stop_assoc_denied: number of denied association to collect
|
|
* @stop_assoc_timeout: number of association timeout to collect
|
|
* @stop_connection_loss: number of connection loss to collect
|
|
* @start_auth_denied: number of denied authentication to start recording
|
|
* @start_auth_timeout: number of authentication timeout to start recording
|
|
* @start_rx_deauth: number of Rx deauth to start recording
|
|
* @start_tx_deauth: number of Tx deauth to start recording
|
|
* @start_assoc_denied: number of denied association to start recording
|
|
* @start_assoc_timeout: number of association timeout to start recording
|
|
* @start_connection_loss: number of connection loss to start recording
|
|
*/
|
|
struct iwx_fw_dbg_trigger_mlme {
|
|
uint8_t stop_auth_denied;
|
|
uint8_t stop_auth_timeout;
|
|
uint8_t stop_rx_deauth;
|
|
uint8_t stop_tx_deauth;
|
|
|
|
uint8_t stop_assoc_denied;
|
|
uint8_t stop_assoc_timeout;
|
|
uint8_t stop_connection_loss;
|
|
uint8_t reserved;
|
|
|
|
uint8_t start_auth_denied;
|
|
uint8_t start_auth_timeout;
|
|
uint8_t start_rx_deauth;
|
|
uint8_t start_tx_deauth;
|
|
|
|
uint8_t start_assoc_denied;
|
|
uint8_t start_assoc_timeout;
|
|
uint8_t start_connection_loss;
|
|
uint8_t reserved2;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
|
|
* @command_queue: timeout for the command queue in ms
|
|
* @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
|
|
* @softap: timeout for the queues of a softAP in ms
|
|
* @p2p_go: timeout for the queues of a P2P GO in ms
|
|
* @p2p_client: timeout for the queues of a P2P client in ms
|
|
* @p2p_device: timeout for the queues of a P2P device in ms
|
|
* @ibss: timeout for the queues of an IBSS in ms
|
|
* @tdls: timeout for the queues of a TDLS station in ms
|
|
*/
|
|
struct iwx_fw_dbg_trigger_txq_timer {
|
|
uint32_t command_queue;
|
|
uint32_t bss;
|
|
uint32_t softap;
|
|
uint32_t p2p_go;
|
|
uint32_t p2p_client;
|
|
uint32_t p2p_device;
|
|
uint32_t ibss;
|
|
uint32_t tdls;
|
|
uint32_t reserved[4];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_time_event - configures a time event trigger
|
|
* time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
|
|
* trigger each time a time event notification that relates to time event
|
|
* id with one of the actions in the bitmap is received and
|
|
* BIT(notif->status) is set in status_bitmap.
|
|
*
|
|
*/
|
|
struct iwx_fw_dbg_trigger_time_event {
|
|
struct {
|
|
uint32_t id;
|
|
uint32_t action_bitmap;
|
|
uint32_t status_bitmap;
|
|
} __packed time_events[16];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_ba - configures BlockAck related trigger
|
|
* rx_ba_start: tid bitmap to configure on what tid the trigger should occur
|
|
* when an Rx BlockAck session is started.
|
|
* rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
|
|
* when an Rx BlockAck session is stopped.
|
|
* tx_ba_start: tid bitmap to configure on what tid the trigger should occur
|
|
* when a Tx BlockAck session is started.
|
|
* tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
|
|
* when a Tx BlockAck session is stopped.
|
|
* rx_bar: tid bitmap to configure on what tid the trigger should occur
|
|
* when a BAR is received (for a Tx BlockAck session).
|
|
* tx_bar: tid bitmap to configure on what tid the trigger should occur
|
|
* when a BAR is send (for an Rx BlocAck session).
|
|
* frame_timeout: tid bitmap to configure on what tid the trigger should occur
|
|
* when a frame times out in the reordering buffer.
|
|
*/
|
|
struct iwx_fw_dbg_trigger_ba {
|
|
uint16_t rx_ba_start;
|
|
uint16_t rx_ba_stop;
|
|
uint16_t tx_ba_start;
|
|
uint16_t tx_ba_stop;
|
|
uint16_t rx_bar;
|
|
uint16_t tx_bar;
|
|
uint16_t frame_timeout;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_tx_latency - configures tx latency related trigger
|
|
* @thrshold: the wanted threshold.
|
|
* @tid_bitmap: the tid to apply the threshold on
|
|
* @mode: recording mode (Internal buffer or continues recording)
|
|
* @window: the size of the window before collecting.
|
|
* @reserved: reserved.
|
|
*/
|
|
struct iwx_fw_dbg_trigger_tx_latency {
|
|
uint32_t thrshold;
|
|
uint16_t tid_bitmap;
|
|
uint16_t mode;
|
|
uint32_t window;
|
|
uint32_t reserved[4];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_tdls - configures trigger for TDLS events.
|
|
* @action_bitmap: the TDLS action to trigger the collection upon
|
|
* @peer_mode: trigger on specific peer or all
|
|
* @peer: the TDLS peer to trigger the collection on
|
|
*/
|
|
struct iwx_fw_dbg_trigger_tdls {
|
|
uint8_t action_bitmap;
|
|
uint8_t peer_mode;
|
|
uint8_t peer[ETHER_ADDR_LEN];
|
|
uint8_t reserved[4];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_trigger_tx_status - configures trigger for tx response
|
|
* status.
|
|
* @statuses: the list of statuses to trigger the collection on
|
|
*/
|
|
struct iwx_fw_dbg_trigger_tx_status {
|
|
struct tx_status {
|
|
uint8_t status;
|
|
uint8_t reserved[3];
|
|
} __packed statuses[16];
|
|
uint32_t reserved[2];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
|
|
* @id: conf id
|
|
* @usniffer: should the uSniffer image be used
|
|
* @num_of_hcmds: how many HCMDs to send are present here
|
|
* @hcmd: a variable length host command to be sent to apply the configuration.
|
|
* If there is more than one HCMD to send, they will appear one after the
|
|
* other and be sent in the order that they appear in.
|
|
* This parses IWX_UCODE_TLV_FW_DBG_CONF. The user can add up-to
|
|
* %IWX_FW_DBG_CONF_MAX configuration per run.
|
|
*/
|
|
struct iwx_fw_dbg_conf_tlv {
|
|
uint8_t id;
|
|
uint8_t usniffer;
|
|
uint8_t reserved;
|
|
uint8_t num_of_hcmds;
|
|
struct iwx_fw_dbg_conf_hcmd hcmd;
|
|
} __packed;
|
|
|
|
#define IWX_FW_CMD_VER_UNKNOWN 99
|
|
|
|
/**
|
|
* struct iwx_fw_cmd_version - firmware command version entry
|
|
* @cmd: command ID
|
|
* @group: group ID
|
|
* @cmd_ver: command version
|
|
* @notif_ver: notification version
|
|
*/
|
|
struct iwx_fw_cmd_version {
|
|
uint8_t cmd;
|
|
uint8_t group;
|
|
uint8_t cmd_ver;
|
|
uint8_t notif_ver;
|
|
} __packed;
|
|
|
|
/* Common PHY, MAC and Bindings definitions */
|
|
|
|
#define IWX_MAX_MACS_IN_BINDING (3)
|
|
#define IWX_MAX_BINDINGS (4)
|
|
#define IWX_AUX_BINDING_INDEX (3)
|
|
#define IWX_MAX_PHYS (4)
|
|
|
|
/* Used to extract ID and color from the context dword */
|
|
#define IWX_FW_CTXT_ID_POS (0)
|
|
#define IWX_FW_CTXT_ID_MSK (0xff << IWX_FW_CTXT_ID_POS)
|
|
#define IWX_FW_CTXT_COLOR_POS (8)
|
|
#define IWX_FW_CTXT_COLOR_MSK (0xff << IWX_FW_CTXT_COLOR_POS)
|
|
#define IWX_FW_CTXT_INVALID (0xffffffff)
|
|
|
|
#define IWX_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWX_FW_CTXT_ID_POS) |\
|
|
(_color << IWX_FW_CTXT_COLOR_POS))
|
|
|
|
/* Possible actions on PHYs, MACs and Bindings */
|
|
#define IWX_FW_CTXT_ACTION_STUB 0
|
|
#define IWX_FW_CTXT_ACTION_ADD 1
|
|
#define IWX_FW_CTXT_ACTION_MODIFY 2
|
|
#define IWX_FW_CTXT_ACTION_REMOVE 3
|
|
#define IWX_FW_CTXT_ACTION_NUM 4
|
|
/* COMMON_CONTEXT_ACTION_API_E_VER_1 */
|
|
|
|
/* Time Events */
|
|
|
|
/* Time Event types, according to MAC type */
|
|
|
|
/* BSS Station Events */
|
|
#define IWX_TE_BSS_STA_AGGRESSIVE_ASSOC 0
|
|
#define IWX_TE_BSS_STA_ASSOC 1
|
|
#define IWX_TE_BSS_EAP_DHCP_PROT 2
|
|
#define IWX_TE_BSS_QUIET_PERIOD 3
|
|
|
|
/* P2P Device Events */
|
|
#define IWX_TE_P2P_DEVICE_DISCOVERABLE 4
|
|
#define IWX_TE_P2P_DEVICE_LISTEN 5
|
|
#define IWX_TE_P2P_DEVICE_ACTION_SCAN 6
|
|
#define IWX_TE_P2P_DEVICE_FULL_SCAN 7
|
|
|
|
/* P2P Client Events */
|
|
#define IWX_TE_P2P_CLIENT_AGGRESSIVE_ASSOC 8
|
|
#define IWX_TE_P2P_CLIENT_ASSOC 9
|
|
#define IWX_TE_P2P_CLIENT_QUIET_PERIOD 10
|
|
|
|
/* P2P GO Events */
|
|
#define IWX_TE_P2P_GO_ASSOC_PROT 11
|
|
#define IWX_TE_P2P_GO_REPETITIVE_NOA 12
|
|
#define IWX_TE_P2P_GO_CT_WINDOW 13
|
|
|
|
/* WiDi Sync Events */
|
|
#define IWX_TE_WIDI_TX_SYNC 14
|
|
|
|
/* Time event - defines for command API */
|
|
|
|
/**
|
|
* DOC: Time Events - what is it?
|
|
*
|
|
* Time Events are a fw feature that allows the driver to control the presence
|
|
* of the device on the channel. Since the fw supports multiple channels
|
|
* concurrently, the fw may choose to jump to another channel at any time.
|
|
* In order to make sure that the fw is on a specific channel at a certain time
|
|
* and for a certain duration, the driver needs to issue a time event.
|
|
*
|
|
* The simplest example is for BSS association. The driver issues a time event,
|
|
* waits for it to start, and only then tells mac80211 that we can start the
|
|
* association. This way, we make sure that the association will be done
|
|
* smoothly and won't be interrupted by channel switch decided within the fw.
|
|
*/
|
|
|
|
/**
|
|
* DOC: The flow against the fw
|
|
*
|
|
* When the driver needs to make sure we are in a certain channel, at a certain
|
|
* time and for a certain duration, it sends a Time Event. The flow against the
|
|
* fw goes like this:
|
|
* 1) Driver sends a TIME_EVENT_CMD to the fw
|
|
* 2) Driver gets the response for that command. This response contains the
|
|
* Unique ID (UID) of the event.
|
|
* 3) The fw sends notification when the event starts.
|
|
*
|
|
* Of course the API provides various options that allow to cover parameters
|
|
* of the flow.
|
|
* What is the duration of the event?
|
|
* What is the start time of the event?
|
|
* Is there an end-time for the event?
|
|
* How much can the event be delayed?
|
|
* Can the event be split?
|
|
* If yes what is the maximal number of chunks?
|
|
* etc...
|
|
*/
|
|
|
|
/*
|
|
* @IWX_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
|
|
* @IWX_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
|
|
* the first fragment is scheduled.
|
|
* @IWX_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
|
|
* the first 2 fragments are scheduled.
|
|
* @IWX_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
|
|
* number of fragments are valid.
|
|
*
|
|
* Other than the constant defined above, specifying a fragmentation value 'x'
|
|
* means that the event can be fragmented but only the first 'x' will be
|
|
* scheduled.
|
|
*/
|
|
#define IWX_TE_V2_FRAG_NONE 0
|
|
#define IWX_TE_V2_FRAG_SINGLE 1
|
|
#define IWX_TE_V2_FRAG_DUAL 2
|
|
#define IWX_TE_V2_FRAG_MAX 0xfe
|
|
#define IWX_TE_V2_FRAG_ENDLESS 0xff
|
|
|
|
/* Repeat the time event endlessly (until removed) */
|
|
#define IWX_TE_V2_REPEAT_ENDLESS 0xff
|
|
/* If a Time Event has bounded repetitions, this is the maximal value */
|
|
#define IWX_TE_V2_REPEAT_MAX 0xfe
|
|
|
|
#define IWX_TE_V2_PLACEMENT_POS 12
|
|
#define IWX_TE_V2_ABSENCE_POS 15
|
|
|
|
/* Time event policy values
|
|
* A notification (both event and fragment) includes a status indicating weather
|
|
* the FW was able to schedule the event or not. For fragment start/end
|
|
* notification the status is always success. There is no start/end fragment
|
|
* notification for monolithic events.
|
|
*
|
|
* @IWX_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
|
|
* @IWX_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
|
|
* @IWX_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
|
|
* @IWX_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
|
|
* @IWX_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
|
|
* @IWX_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
|
|
* @IWX_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
|
|
* @IWX_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
|
|
* @IWX_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
|
|
* @IWX_TE_V2_DEP_OTHER: depends on another time event
|
|
* @IWX_TE_V2_DEP_TSF: depends on a specific time
|
|
* @IWX_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of the same MAC
|
|
* @IWX_TE_V2_ABSENCE: are we present or absent during the Time Event.
|
|
*/
|
|
#define IWX_TE_V2_DEFAULT_POLICY 0x0
|
|
|
|
/* notifications (event start/stop, fragment start/stop) */
|
|
#define IWX_TE_V2_NOTIF_HOST_EVENT_START (1 << 0)
|
|
#define IWX_TE_V2_NOTIF_HOST_EVENT_END (1 << 1)
|
|
#define IWX_TE_V2_NOTIF_INTERNAL_EVENT_START (1 << 2)
|
|
#define IWX_TE_V2_NOTIF_INTERNAL_EVENT_END (1 << 3)
|
|
|
|
#define IWX_TE_V2_NOTIF_HOST_FRAG_START (1 << 4)
|
|
#define IWX_TE_V2_NOTIF_HOST_FRAG_END (1 << 5)
|
|
#define IWX_TE_V2_NOTIF_INTERNAL_FRAG_START (1 << 6)
|
|
#define IWX_TE_V2_NOTIF_INTERNAL_FRAG_END (1 << 7)
|
|
#define IWX_T2_V2_START_IMMEDIATELY (1 << 11)
|
|
|
|
#define IWX_TE_V2_NOTIF_MSK 0xff
|
|
|
|
/* placement characteristics */
|
|
#define IWX_TE_V2_DEP_OTHER (1 << IWX_TE_V2_PLACEMENT_POS)
|
|
#define IWX_TE_V2_DEP_TSF (1 << (IWX_TE_V2_PLACEMENT_POS + 1))
|
|
#define IWX_TE_V2_EVENT_SOCIOPATHIC (1 << (IWX_TE_V2_PLACEMENT_POS + 2))
|
|
|
|
/* are we present or absent during the Time Event. */
|
|
#define IWX_TE_V2_ABSENCE (1 << IWX_TE_V2_ABSENCE_POS)
|
|
|
|
/**
|
|
* struct iwx_time_event_cmd_api - configuring Time Events
|
|
* with struct IWX_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
|
|
* with version 1. determined by IWX_UCODE_TLV_FLAGS)
|
|
* ( IWX_TIME_EVENT_CMD = 0x29 )
|
|
* @id_and_color: ID and color of the relevant MAC
|
|
* @action: action to perform, one of IWX_FW_CTXT_ACTION_*
|
|
* @id: this field has two meanings, depending on the action:
|
|
* If the action is ADD, then it means the type of event to add.
|
|
* For all other actions it is the unique event ID assigned when the
|
|
* event was added by the FW.
|
|
* @apply_time: When to start the Time Event (in GP2)
|
|
* @max_delay: maximum delay to event's start (apply time), in TU
|
|
* @depends_on: the unique ID of the event we depend on (if any)
|
|
* @interval: interval between repetitions, in TU
|
|
* @duration: duration of event in TU
|
|
* @repeat: how many repetitions to do, can be IWX_TE_REPEAT_ENDLESS
|
|
* @max_frags: maximal number of fragments the Time Event can be divided to
|
|
* @policy: defines whether uCode shall notify the host or other uCode modules
|
|
* on event and/or fragment start and/or end
|
|
* using one of IWX_TE_INDEPENDENT, IWX_TE_DEP_OTHER, IWX_TE_DEP_TSF
|
|
* IWX_TE_EVENT_SOCIOPATHIC
|
|
* using IWX_TE_ABSENCE and using IWX_TE_NOTIF_*
|
|
*/
|
|
struct iwx_time_event_cmd {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
uint32_t id;
|
|
/* IWX_MAC_TIME_EVENT_DATA_API_S_VER_2 */
|
|
uint32_t apply_time;
|
|
uint32_t max_delay;
|
|
uint32_t depends_on;
|
|
uint32_t interval;
|
|
uint32_t duration;
|
|
uint8_t repeat;
|
|
uint8_t max_frags;
|
|
uint16_t policy;
|
|
} __packed; /* IWX_MAC_TIME_EVENT_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_time_event_resp - response structure to iwx_time_event_cmd
|
|
* @status: bit 0 indicates success, all others specify errors
|
|
* @id: the Time Event type
|
|
* @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
|
|
* @id_and_color: ID and color of the relevant MAC
|
|
*/
|
|
struct iwx_time_event_resp {
|
|
uint32_t status;
|
|
uint32_t id;
|
|
uint32_t unique_id;
|
|
uint32_t id_and_color;
|
|
} __packed; /* IWX_MAC_TIME_EVENT_RSP_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_time_event_notif - notifications of time event start/stop
|
|
* ( IWX_TIME_EVENT_NOTIFICATION = 0x2a )
|
|
* @timestamp: action timestamp in GP2
|
|
* @session_id: session's unique id
|
|
* @unique_id: unique id of the Time Event itself
|
|
* @id_and_color: ID and color of the relevant MAC
|
|
* @action: one of IWX_TE_NOTIF_START or IWX_TE_NOTIF_END
|
|
* @status: true if scheduled, false otherwise (not executed)
|
|
*/
|
|
struct iwx_time_event_notif {
|
|
uint32_t timestamp;
|
|
uint32_t session_id;
|
|
uint32_t unique_id;
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
uint32_t status;
|
|
} __packed; /* IWX_MAC_TIME_EVENT_NTFY_API_S_VER_1 */
|
|
|
|
/**
|
|
* enum iwx_session_prot_conf_id - session protection's configurations
|
|
* @SESSION_PROTECT_CONF_ASSOC: Start a session protection for association.
|
|
* The firmware will allocate two events.
|
|
* Valid for BSS_STA and P2P_STA.
|
|
* * A rather short event that can't be fragmented and with a very
|
|
* high priority. If every goes well (99% of the cases) the
|
|
* association should complete within this first event. During
|
|
* that event, no other activity will happen in the firmware,
|
|
* which is why it can't be too long.
|
|
* The length of this event is hard-coded in the firmware: 300TUs.
|
|
* * Another event which can be much longer (its duration is
|
|
* configurable by the driver) which has a slightly lower
|
|
* priority and that can be fragmented allowing other activities
|
|
* to run while this event is running.
|
|
* The firmware will automatically remove both events once the driver sets
|
|
* the BSS MAC as associated. Neither of the events will be removed
|
|
* for the P2P_STA MAC.
|
|
* Only the duration is configurable for this protection.
|
|
* @SESSION_PROTECT_CONF_GO_CLIENT_ASSOC: not used
|
|
* @SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV: Schedule the P2P Device to be in
|
|
* listen mode. Will be fragmented. Valid only on the P2P Device MAC.
|
|
* Valid only on the P2P Device MAC. The firmware will take into account
|
|
* the duration, the interval and the repetition count.
|
|
* @SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION: Schedule the P2P Device to be be
|
|
* able to run the GO Negotiation. Will not be fragmented and not
|
|
* repetitive. Valid only on the P2P Device MAC. Only the duration will
|
|
* be taken into account.
|
|
* @SESSION_PROTECT_CONF_MAX_ID: not used
|
|
*/
|
|
enum iwx_session_prot_conf_id {
|
|
IWX_SESSION_PROTECT_CONF_ASSOC,
|
|
IWX_SESSION_PROTECT_CONF_GO_CLIENT_ASSOC,
|
|
IWX_SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV,
|
|
IWX_SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION,
|
|
IWX_SESSION_PROTECT_CONF_MAX_ID,
|
|
}; /* SESSION_PROTECTION_CONF_ID_E_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_session_prot_cmd - configure a session protection
|
|
* @id_and_color: the id and color of the mac for which this session protection
|
|
* is sent
|
|
* @action: can be either FW_CTXT_ACTION_ADD or FW_CTXT_ACTION_REMOVE
|
|
* @conf_id: see &enum iwx_mvm_session_prot_conf_id
|
|
* @duration_tu: the duration of the whole protection in TUs.
|
|
* @repetition_count: not used
|
|
* @interval: not used
|
|
*
|
|
* Note: the session protection will always be scheduled to start as
|
|
* early as possible, but the maximum delay is configuration dependent.
|
|
* The firmware supports only one concurrent session protection per vif.
|
|
* Adding a new session protection will remove any currently running session.
|
|
*/
|
|
struct iwx_session_prot_cmd {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
uint32_t conf_id;
|
|
uint32_t duration_tu;
|
|
uint32_t repetition_count;
|
|
uint32_t interval;
|
|
} __packed; /* SESSION_PROTECTION_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_session_prot_notif - session protection started / ended
|
|
* @mac_id: the mac id for which the session protection started / ended
|
|
* @status: 1 means success, 0 means failure
|
|
* @start: 1 means the session protection started, 0 means it ended
|
|
* @conf_id: see &enum iwx_mvm_session_prot_conf_id
|
|
*
|
|
* Note that any session protection will always get two notifications: start
|
|
* and end even the firmware could not schedule it.
|
|
*/
|
|
struct iwx_session_prot_notif {
|
|
uint32_t mac_id;
|
|
uint32_t status;
|
|
uint32_t start;
|
|
uint32_t conf_id;
|
|
} __packed; /* SESSION_PROTECTION_NOTIFICATION_API_S_VER_2 */
|
|
|
|
|
|
/* Bindings and Time Quota */
|
|
|
|
/**
|
|
* struct iwx_binding_cmd - configuring bindings
|
|
* ( IWX_BINDING_CONTEXT_CMD = 0x2b )
|
|
* @id_and_color: ID and color of the relevant Binding
|
|
* @action: action to perform, one of IWX_FW_CTXT_ACTION_*
|
|
* @macs: array of MAC id and colors which belong to the binding
|
|
* @phy: PHY id and color which belongs to the binding
|
|
* @lmac_id: the lmac id the binding belongs to
|
|
*/
|
|
struct iwx_binding_cmd {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* IWX_BINDING_DATA_API_S_VER_1 */
|
|
uint32_t macs[IWX_MAX_MACS_IN_BINDING];
|
|
uint32_t phy;
|
|
uint32_t lmac_id;
|
|
} __packed; /* IWX_BINDING_CMD_API_S_VER_2 */
|
|
|
|
#define IWX_LMAC_24G_INDEX 0
|
|
#define IWX_LMAC_5G_INDEX 1
|
|
|
|
/* The maximal number of fragments in the FW's schedule session */
|
|
#define IWX_MAX_QUOTA 128
|
|
|
|
/**
|
|
* struct iwx_time_quota_data - configuration of time quota per binding
|
|
* @id_and_color: ID and color of the relevant Binding
|
|
* @quota: absolute time quota in TU. The scheduler will try to divide the
|
|
* remaining quota (after Time Events) according to this quota.
|
|
* @max_duration: max uninterrupted context duration in TU
|
|
*/
|
|
struct iwx_time_quota_data {
|
|
uint32_t id_and_color;
|
|
uint32_t quota;
|
|
uint32_t max_duration;
|
|
} __packed; /* IWX_TIME_QUOTA_DATA_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_time_quota_cmd - configuration of time quota between bindings
|
|
* ( IWX_TIME_QUOTA_CMD = 0x2c )
|
|
* @quotas: allocations per binding
|
|
*/
|
|
struct iwx_time_quota_cmd {
|
|
struct iwx_time_quota_data quotas[IWX_MAX_BINDINGS];
|
|
} __packed; /* IWX_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
|
|
|
|
|
|
/* PHY context */
|
|
|
|
/* Supported bands */
|
|
#define IWX_PHY_BAND_5 (0)
|
|
#define IWX_PHY_BAND_24 (1)
|
|
|
|
/* Supported channel width, vary if there is VHT support */
|
|
#define IWX_PHY_VHT_CHANNEL_MODE20 (0x0)
|
|
#define IWX_PHY_VHT_CHANNEL_MODE40 (0x1)
|
|
#define IWX_PHY_VHT_CHANNEL_MODE80 (0x2)
|
|
#define IWX_PHY_VHT_CHANNEL_MODE160 (0x3)
|
|
|
|
/*
|
|
* Control channel position:
|
|
* For legacy set bit means upper channel, otherwise lower.
|
|
* For VHT - bit-2 marks if the control is lower/upper relative to center-freq
|
|
* bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
|
|
* center_freq
|
|
* |
|
|
* 40Mhz |_______|_______|
|
|
* 80Mhz |_______|_______|_______|_______|
|
|
* 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
|
|
* code 011 010 001 000 | 100 101 110 111
|
|
*/
|
|
#define IWX_PHY_VHT_CTRL_POS_1_BELOW (0x0)
|
|
#define IWX_PHY_VHT_CTRL_POS_2_BELOW (0x1)
|
|
#define IWX_PHY_VHT_CTRL_POS_3_BELOW (0x2)
|
|
#define IWX_PHY_VHT_CTRL_POS_4_BELOW (0x3)
|
|
#define IWX_PHY_VHT_CTRL_POS_1_ABOVE (0x4)
|
|
#define IWX_PHY_VHT_CTRL_POS_2_ABOVE (0x5)
|
|
#define IWX_PHY_VHT_CTRL_POS_3_ABOVE (0x6)
|
|
#define IWX_PHY_VHT_CTRL_POS_4_ABOVE (0x7)
|
|
|
|
/*
|
|
* @band: IWX_PHY_BAND_*
|
|
* @channel: channel number
|
|
* @width: PHY_[VHT|LEGACY]_CHANNEL_*
|
|
* @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
|
|
*/
|
|
struct iwx_fw_channel_info_v1 {
|
|
uint8_t band;
|
|
uint8_t channel;
|
|
uint8_t width;
|
|
uint8_t ctrl_pos;
|
|
} __packed; /* CHANNEL_CONFIG_API_S_VER_1 */
|
|
|
|
/*
|
|
* struct iwx_fw_channel_info - channel information
|
|
*
|
|
* @channel: channel number
|
|
* @band: PHY_BAND_*
|
|
* @width: PHY_[VHT|LEGACY]_CHANNEL_*
|
|
* @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
|
|
* @reserved: for future use and alignment
|
|
*/
|
|
struct iwx_fw_channel_info {
|
|
uint32_t channel;
|
|
uint8_t band;
|
|
uint8_t width;
|
|
uint8_t ctrl_pos;
|
|
uint8_t reserved;
|
|
} __packed; /*CHANNEL_CONFIG_API_S_VER_2 */
|
|
|
|
#define IWX_PHY_RX_CHAIN_DRIVER_FORCE_POS (0)
|
|
#define IWX_PHY_RX_CHAIN_DRIVER_FORCE_MSK \
|
|
(0x1 << IWX_PHY_RX_CHAIN_DRIVER_FORCE_POS)
|
|
#define IWX_PHY_RX_CHAIN_VALID_POS (1)
|
|
#define IWX_PHY_RX_CHAIN_VALID_MSK \
|
|
(0x7 << IWX_PHY_RX_CHAIN_VALID_POS)
|
|
#define IWX_PHY_RX_CHAIN_FORCE_SEL_POS (4)
|
|
#define IWX_PHY_RX_CHAIN_FORCE_SEL_MSK \
|
|
(0x7 << IWX_PHY_RX_CHAIN_FORCE_SEL_POS)
|
|
#define IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
|
|
#define IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
|
|
(0x7 << IWX_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
|
|
#define IWX_PHY_RX_CHAIN_CNT_POS (10)
|
|
#define IWX_PHY_RX_CHAIN_CNT_MSK \
|
|
(0x3 << IWX_PHY_RX_CHAIN_CNT_POS)
|
|
#define IWX_PHY_RX_CHAIN_MIMO_CNT_POS (12)
|
|
#define IWX_PHY_RX_CHAIN_MIMO_CNT_MSK \
|
|
(0x3 << IWX_PHY_RX_CHAIN_MIMO_CNT_POS)
|
|
#define IWX_PHY_RX_CHAIN_MIMO_FORCE_POS (14)
|
|
#define IWX_PHY_RX_CHAIN_MIMO_FORCE_MSK \
|
|
(0x1 << IWX_PHY_RX_CHAIN_MIMO_FORCE_POS)
|
|
|
|
/* TODO: fix the value, make it depend on firmware at runtime? */
|
|
#define IWX_NUM_PHY_CTX 3
|
|
|
|
/**
|
|
* struct iwl_phy_context_cmd - config of the PHY context
|
|
* ( IWX_PHY_CONTEXT_CMD = 0x8 )
|
|
* @id_and_color: ID and color of the relevant Binding
|
|
* @action: action to perform, one of IWX_FW_CTXT_ACTION_*
|
|
* @lmac_id: the lmac id the phy context belongs to
|
|
* @ci: channel info
|
|
* @rxchain_info: ???
|
|
* @dsp_cfg_flags: set to 0
|
|
* @reserved: reserved to align to 64 bit
|
|
*/
|
|
struct iwx_phy_context_cmd_uhb {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* PHY_CONTEXT_DATA_API_S_VER_3 */
|
|
struct iwx_fw_channel_info ci;
|
|
uint32_t lmac_id;
|
|
uint32_t rxchain_info;
|
|
uint32_t dsp_cfg_flags;
|
|
uint32_t reserved;
|
|
} __packed; /* PHY_CONTEXT_CMD_API_VER_3 */
|
|
struct iwx_phy_context_cmd {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* PHY_CONTEXT_DATA_API_S_VER_3, PHY_CONTEXT_DATA_API_S_VER_4 */
|
|
struct iwx_fw_channel_info_v1 ci;
|
|
uint32_t lmac_id;
|
|
uint32_t rxchain_info; /* reserved in _VER_4 */
|
|
uint32_t dsp_cfg_flags;
|
|
uint32_t reserved;
|
|
} __packed; /* PHY_CONTEXT_CMD_API_VER_3, PHY_CONTEXT_CMD_API_VER_4 */
|
|
|
|
/* TODO: complete missing documentation */
|
|
/**
|
|
* struct iwx_phy_context_cmd - config of the PHY context
|
|
* ( IWX_PHY_CONTEXT_CMD = 0x8 )
|
|
* @id_and_color: ID and color of the relevant Binding
|
|
* @action: action to perform, one of IWX_FW_CTXT_ACTION_*
|
|
* @apply_time: 0 means immediate apply and context switch.
|
|
* other value means apply new params after X usecs
|
|
* @tx_param_color: ???
|
|
* @channel_info:
|
|
* @txchain_info: ???
|
|
* @rxchain_info: ???
|
|
* @acquisition_data: ???
|
|
* @dsp_cfg_flags: set to 0
|
|
*/
|
|
/*
|
|
* XXX Intel forgot to bump the PHY_CONTEXT command API when they increased
|
|
* the size of fw_channel_info from v1 to v2.
|
|
* To keep things simple we define two versions of this struct, and both
|
|
* are labeled as CMD_API_VER_1. (The Linux iwlwifi driver performs dark
|
|
* magic with pointers to struct members instead.)
|
|
*/
|
|
/* This version must be used if IWX_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS is set: */
|
|
struct iwx_phy_context_cmd_uhb_v1 {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* IWX_PHY_CONTEXT_DATA_API_S_VER_1 */
|
|
uint32_t apply_time;
|
|
uint32_t tx_param_color;
|
|
struct iwx_fw_channel_info ci;
|
|
uint32_t txchain_info;
|
|
uint32_t rxchain_info;
|
|
uint32_t acquisition_data;
|
|
uint32_t dsp_cfg_flags;
|
|
} __packed; /* IWX_PHY_CONTEXT_CMD_API_VER_1 */
|
|
/* This version must be used otherwise: */
|
|
struct iwx_phy_context_cmd_v1 {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* IWX_PHY_CONTEXT_DATA_API_S_VER_1 */
|
|
uint32_t apply_time;
|
|
uint32_t tx_param_color;
|
|
struct iwx_fw_channel_info_v1 ci;
|
|
uint32_t txchain_info;
|
|
uint32_t rxchain_info;
|
|
uint32_t acquisition_data;
|
|
uint32_t dsp_cfg_flags;
|
|
} __packed; /* IWX_PHY_CONTEXT_CMD_API_VER_1 */
|
|
|
|
|
|
#define IWX_RX_INFO_PHY_CNT 8
|
|
#define IWX_RX_INFO_ENERGY_ANT_ABC_IDX 1
|
|
#define IWX_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
|
|
#define IWX_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00
|
|
#define IWX_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000
|
|
#define IWX_RX_INFO_ENERGY_ANT_A_POS 0
|
|
#define IWX_RX_INFO_ENERGY_ANT_B_POS 8
|
|
#define IWX_RX_INFO_ENERGY_ANT_C_POS 16
|
|
|
|
#define IWX_RX_INFO_AGC_IDX 1
|
|
#define IWX_RX_INFO_RSSI_AB_IDX 2
|
|
#define IWX_OFDM_AGC_A_MSK 0x0000007f
|
|
#define IWX_OFDM_AGC_A_POS 0
|
|
#define IWX_OFDM_AGC_B_MSK 0x00003f80
|
|
#define IWX_OFDM_AGC_B_POS 7
|
|
#define IWX_OFDM_AGC_CODE_MSK 0x3fe00000
|
|
#define IWX_OFDM_AGC_CODE_POS 20
|
|
#define IWX_OFDM_RSSI_INBAND_A_MSK 0x00ff
|
|
#define IWX_OFDM_RSSI_A_POS 0
|
|
#define IWX_OFDM_RSSI_ALLBAND_A_MSK 0xff00
|
|
#define IWX_OFDM_RSSI_ALLBAND_A_POS 8
|
|
#define IWX_OFDM_RSSI_INBAND_B_MSK 0xff0000
|
|
#define IWX_OFDM_RSSI_B_POS 16
|
|
#define IWX_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
|
|
#define IWX_OFDM_RSSI_ALLBAND_B_POS 24
|
|
|
|
/**
|
|
* struct iwx_rx_phy_info - phy info
|
|
* (IWX_REPLY_RX_PHY_CMD = 0xc0)
|
|
* @non_cfg_phy_cnt: non configurable DSP phy data byte count
|
|
* @cfg_phy_cnt: configurable DSP phy data byte count
|
|
* @stat_id: configurable DSP phy data set ID
|
|
* @reserved1:
|
|
* @system_timestamp: GP2 at on air rise
|
|
* @timestamp: TSF at on air rise
|
|
* @beacon_time_stamp: beacon at on-air rise
|
|
* @phy_flags: general phy flags: band, modulation, ...
|
|
* @channel: channel number
|
|
* @non_cfg_phy_buf: for various implementations of non_cfg_phy
|
|
* @rate_n_flags: IWX_RATE_MCS_*
|
|
* @byte_count: frame's byte-count
|
|
* @frame_time: frame's time on the air, based on byte count and frame rate
|
|
* calculation
|
|
* @mac_active_msk: what MACs were active when the frame was received
|
|
*
|
|
* Before each Rx, the device sends this data. It contains PHY information
|
|
* about the reception of the packet.
|
|
*/
|
|
struct iwx_rx_phy_info {
|
|
uint8_t non_cfg_phy_cnt;
|
|
uint8_t cfg_phy_cnt;
|
|
uint8_t stat_id;
|
|
uint8_t reserved1;
|
|
uint32_t system_timestamp;
|
|
uint64_t timestamp;
|
|
uint32_t beacon_time_stamp;
|
|
uint16_t phy_flags;
|
|
#define IWX_PHY_INFO_FLAG_SHPREAMBLE (1 << 2)
|
|
uint16_t channel;
|
|
uint32_t non_cfg_phy[IWX_RX_INFO_PHY_CNT];
|
|
uint32_t rate_n_flags;
|
|
uint32_t byte_count;
|
|
uint16_t mac_active_msk;
|
|
uint16_t frame_time;
|
|
} __packed;
|
|
|
|
struct iwx_rx_mpdu_res_start {
|
|
uint16_t byte_count;
|
|
uint16_t reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* Values to parse %iwx_rx_phy_info phy_flags
|
|
* @IWX_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band
|
|
* @IWX_RX_RES_PHY_FLAGS_MOD_CCK:
|
|
* @IWX_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short
|
|
* @IWX_RX_RES_PHY_FLAGS_NARROW_BAND:
|
|
* @IWX_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received
|
|
* @IWX_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU
|
|
* @IWX_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame
|
|
* @IWX_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble
|
|
* @IWX_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame
|
|
*/
|
|
#define IWX_RX_RES_PHY_FLAGS_BAND_24 (1 << 0)
|
|
#define IWX_RX_RES_PHY_FLAGS_MOD_CCK (1 << 1)
|
|
#define IWX_RX_RES_PHY_FLAGS_SHORT_PREAMBLE (1 << 2)
|
|
#define IWX_RX_RES_PHY_FLAGS_NARROW_BAND (1 << 3)
|
|
#define IWX_RX_RES_PHY_FLAGS_ANTENNA (0x7 << 4)
|
|
#define IWX_RX_RES_PHY_FLAGS_ANTENNA_POS 4
|
|
#define IWX_RX_RES_PHY_FLAGS_AGG (1 << 7)
|
|
#define IWX_RX_RES_PHY_FLAGS_OFDM_HT (1 << 8)
|
|
#define IWX_RX_RES_PHY_FLAGS_OFDM_GF (1 << 9)
|
|
#define IWX_RX_RES_PHY_FLAGS_OFDM_VHT (1 << 10)
|
|
|
|
/**
|
|
* Values written by fw for each Rx packet
|
|
* @IWX_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine
|
|
* @IWX_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
|
|
* @IWX_RX_MPDU_RES_STATUS_SRC_STA_FOUND:
|
|
* @IWX_RX_MPDU_RES_STATUS_KEY_VALID:
|
|
* @IWX_RX_MPDU_RES_STATUS_KEY_PARAM_OK:
|
|
* @IWX_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
|
|
* @IWX_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
|
|
* in the driver.
|
|
* @IWX_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
|
|
* @IWX_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or
|
|
* alg = CCM only. Checks replay attack for 11w frames. Relevant only if
|
|
* %IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
|
|
* @IWX_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
|
|
* @IWX_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
|
|
* @IWX_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP:
|
|
* @IWX_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP:
|
|
* @IWX_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT:
|
|
* @IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
|
|
* @IWX_RX_MPDU_RES_STATUS_HASH_INDEX_MSK:
|
|
* @IWX_RX_MPDU_RES_STATUS_STA_ID_MSK:
|
|
* @IWX_RX_MPDU_RES_STATUS_RRF_KILL:
|
|
* @IWX_RX_MPDU_RES_STATUS_FILTERING_MSK:
|
|
* @IWX_RX_MPDU_RES_STATUS2_FILTERING_MSK:
|
|
*/
|
|
#define IWX_RX_MPDU_RES_STATUS_CRC_OK (1 << 0)
|
|
#define IWX_RX_MPDU_RES_STATUS_OVERRUN_OK (1 << 1)
|
|
#define IWX_RX_MPDU_RES_STATUS_SRC_STA_FOUND (1 << 2)
|
|
#define IWX_RX_MPDU_RES_STATUS_KEY_VALID (1 << 3)
|
|
#define IWX_RX_MPDU_RES_STATUS_KEY_PARAM_OK (1 << 4)
|
|
#define IWX_RX_MPDU_RES_STATUS_ICV_OK (1 << 5)
|
|
#define IWX_RX_MPDU_RES_STATUS_MIC_OK (1 << 6)
|
|
#define IWX_RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
|
|
#define IWX_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR (1 << 7)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_NO_ENC (0 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_WEP_ENC (1 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_CCM_ENC (2 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_TKIP_ENC (3 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_EXT_ENC (4 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC (6 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_ENC_ERR (7 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_SEC_ENC_MSK (7 << 8)
|
|
#define IWX_RX_MPDU_RES_STATUS_DEC_DONE (1 << 11)
|
|
#define IWX_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP (1 << 12)
|
|
#define IWX_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP (1 << 13)
|
|
#define IWX_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT (1 << 14)
|
|
#define IWX_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME (1 << 15)
|
|
#define IWX_RX_MPDU_RES_STATUS_HASH_INDEX_MSK (0x3F0000)
|
|
#define IWX_RX_MPDU_RES_STATUS_STA_ID_MSK (0x1f000000)
|
|
#define IWX_RX_MPDU_RES_STATUS_RRF_KILL (1 << 29)
|
|
#define IWX_RX_MPDU_RES_STATUS_FILTERING_MSK (0xc00000)
|
|
#define IWX_RX_MPDU_RES_STATUS2_FILTERING_MSK (0xc0000000)
|
|
|
|
#define IWX_RX_MPDU_MFLG1_ADDRTYPE_MASK 0x03
|
|
#define IWX_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK 0xf0
|
|
#define IWX_RX_MPDU_MFLG1_MIC_CRC_LEN_SHIFT 3
|
|
|
|
#define IWX_RX_MPDU_MFLG2_HDR_LEN_MASK 0x1f
|
|
#define IWX_RX_MPDU_MFLG2_PAD 0x20
|
|
#define IWX_RX_MPDU_MFLG2_AMSDU 0x40
|
|
|
|
#define IWX_RX_MPDU_AMSDU_SUBFRAME_IDX_MASK 0x7f
|
|
#define IWX_RX_MPDU_AMSDU_LAST_SUBFRAME 0x80
|
|
|
|
#define IWX_RX_MPDU_PHY_AMPDU (1 << 5)
|
|
#define IWX_RX_MPDU_PHY_AMPDU_TOGGLE (1 << 6)
|
|
#define IWX_RX_MPDU_PHY_SHORT_PREAMBLE (1 << 7)
|
|
#define IWX_RX_MPDU_PHY_NCCK_ADDTL_NTFY (1 << 7)
|
|
#define IWX_RX_MPDU_PHY_TSF_OVERLOAD (1 << 8)
|
|
|
|
struct iwx_rx_mpdu_desc_v3 {
|
|
union {
|
|
uint32_t filter_match;
|
|
uint32_t phy_data3;
|
|
};
|
|
union {
|
|
uint32_t rss_hash;
|
|
uint32_t phy_data2;
|
|
};
|
|
uint32_t partial_hash; /* ip/tcp header hash w/o some fields */
|
|
uint16_t raw_xsum;
|
|
uint16_t reserved_xsum;
|
|
uint32_t rate_n_flags;
|
|
uint8_t energy_a;
|
|
uint8_t energy_b;
|
|
uint8_t channel;
|
|
uint8_t mac_context;
|
|
uint32_t gp2_on_air_rise;
|
|
union {
|
|
/*
|
|
* TSF value on air rise (INA), only valid if
|
|
* IWX_RX_MPDU_PHY_TSF_OVERLOAD isn't set
|
|
*/
|
|
struct {
|
|
uint32_t tsf_on_air_rise0;
|
|
uint32_t tsf_on_air_rise1;
|
|
};
|
|
|
|
struct {
|
|
uint32_t phy_data0;
|
|
|
|
/* Only valid if IWX_RX_MPDU_PHY_TSF_OVERLOAD is set. */
|
|
uint32_t phy_data1;
|
|
};
|
|
};
|
|
uint32_t reserved[2];
|
|
} __packed; /* RX_MPDU_RES_START_API_S_VER_3,
|
|
RX_MPDU_RES_START_API_S_VER_5 */
|
|
|
|
struct iwx_rx_mpdu_desc_v1 {
|
|
union {
|
|
uint32_t rss_hash;
|
|
uint32_t phy_data2;
|
|
};
|
|
union {
|
|
uint32_t filter_match;
|
|
uint32_t phy_data3;
|
|
};
|
|
uint32_t rate_n_flags;
|
|
uint8_t energy_a;
|
|
uint8_t energy_b;
|
|
uint8_t channel;
|
|
uint8_t mac_context;
|
|
uint32_t gp2_on_air_rise;
|
|
union {
|
|
struct {
|
|
uint32_t tsf_on_air_rise0;
|
|
uint32_t tsf_on_air_rise1;
|
|
};
|
|
struct {
|
|
uint32_t phy_data0;
|
|
uint32_t phy_data1;
|
|
};
|
|
};
|
|
} __packed;
|
|
|
|
#define IWX_RX_REORDER_DATA_INVALID_BAID 0x7f
|
|
|
|
#define IWX_RX_MPDU_REORDER_NSSN_MASK 0x00000fff
|
|
#define IWX_RX_MPDU_REORDER_SN_MASK 0x00fff000
|
|
#define IWX_RX_MPDU_REORDER_SN_SHIFT 12
|
|
#define IWX_RX_MPDU_REORDER_BAID_MASK 0x7f000000
|
|
#define IWX_RX_MPDU_REORDER_BAID_SHIFT 24
|
|
#define IWX_RX_MPDU_REORDER_BA_OLD_SN 0x80000000
|
|
|
|
struct iwx_rx_mpdu_desc {
|
|
uint16_t mpdu_len;
|
|
uint8_t mac_flags1;
|
|
uint8_t mac_flags2;
|
|
uint8_t amsdu_info;
|
|
uint16_t phy_info;
|
|
uint8_t mac_phy_idx;
|
|
uint16_t raw_csum;
|
|
union {
|
|
uint16_t l3l4_flags;
|
|
uint16_t phy_data4;
|
|
};
|
|
uint16_t status;
|
|
uint8_t hash_filter;
|
|
uint8_t sta_id_flags;
|
|
uint32_t reorder_data;
|
|
union {
|
|
struct iwx_rx_mpdu_desc_v1 v1;
|
|
struct iwx_rx_mpdu_desc_v3 v3;
|
|
};
|
|
} __packed; /* RX_MPDU_RES_START_API_S_VER_3,
|
|
RX_MPDU_RES_START_API_S_VER_4,
|
|
RX_MPDU_RES_START_API_S_VER_5 */
|
|
|
|
#define IWX_RX_DESC_SIZE_V1 ((sizeof(struct iwx_rx_mpdu_desc) - \
|
|
sizeof(struct iwx_rx_mpdu_desc_v3)) + sizeof(struct iwx_rx_mpdu_desc_v1))
|
|
|
|
struct iwx_frame_release {
|
|
uint8_t baid;
|
|
uint8_t reserved;
|
|
uint16_t nssn;
|
|
};
|
|
|
|
/**
|
|
* enum iwx_bar_frame_release_sta_tid - STA/TID information for BAR release
|
|
* @IWX_BAR_FRAME_RELEASE_TID_MASK: TID mask
|
|
* @IWX_BAR_FRAME_RELEASE_STA_MASK: STA mask
|
|
*/
|
|
#define IWX_BAR_FRAME_RELEASE_TID_MASK 0x0000000f
|
|
#define IWX_BAR_FRAME_RELEASE_STA_MASK 0x000001f0
|
|
#define IWX_BAR_FRAME_RELEASE_STA_SHIFT 4
|
|
|
|
/**
|
|
* enum iwx_bar_frame_release_ba_info - BA information for BAR release
|
|
* @IWL_BAR_FRAME_RELEASE_NSSN_MASK: NSSN mask
|
|
* @IWL_BAR_FRAME_RELEASE_SN_MASK: SN mask (ignored by driver)
|
|
* @IWL_BAR_FRAME_RELEASE_BAID_MASK: BAID mask
|
|
*/
|
|
#define IWX_BAR_FRAME_RELEASE_NSSN_MASK 0x00000fff
|
|
#define IWX_BAR_FRAME_RELEASE_SN_MASK 0x00fff000
|
|
#define IWX_BAR_FRAME_RELEASE_SN_SHIFT 12
|
|
#define IWX_BAR_FRAME_RELEASE_BAID_MASK 0x3f000000
|
|
#define IWX_BAR_FRAME_RELEASE_BAID_SHIFT 24
|
|
|
|
/**
|
|
* struct iwx_bar_frame_release - frame release from BAR info
|
|
* @sta_tid: STA & TID information, see &enum iwx_bar_frame_release_sta_tid.
|
|
* @ba_info: BA information, see &enum iwx_bar_frame_release_ba_info.
|
|
*/
|
|
struct iwx_bar_frame_release {
|
|
uint32_t sta_tid;
|
|
uint32_t ba_info;
|
|
} __packed; /* RX_BAR_TO_FRAME_RELEASE_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_radio_version_notif - information on the radio version
|
|
* ( IWX_RADIO_VERSION_NOTIFICATION = 0x68 )
|
|
* @radio_flavor:
|
|
* @radio_step:
|
|
* @radio_dash:
|
|
*/
|
|
struct iwx_radio_version_notif {
|
|
uint32_t radio_flavor;
|
|
uint32_t radio_step;
|
|
uint32_t radio_dash;
|
|
} __packed; /* IWX_RADIO_VERSION_NOTOFICATION_S_VER_1 */
|
|
|
|
#define IWX_CARD_ENABLED 0x00
|
|
#define IWX_HW_CARD_DISABLED 0x01
|
|
#define IWX_SW_CARD_DISABLED 0x02
|
|
#define IWX_CT_KILL_CARD_DISABLED 0x04
|
|
#define IWX_HALT_CARD_DISABLED 0x08
|
|
#define IWX_CARD_DISABLED_MSK 0x0f
|
|
#define IWX_CARD_IS_RX_ON 0x10
|
|
|
|
/**
|
|
* struct iwx_radio_version_notif - information on the radio version
|
|
* (IWX_CARD_STATE_NOTIFICATION = 0xa1 )
|
|
* @flags: %iwx_card_state_flags
|
|
*/
|
|
struct iwx_card_state_notif {
|
|
uint32_t flags;
|
|
} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_missed_beacons_notif - information on missed beacons
|
|
* ( IWX_MISSED_BEACONS_NOTIFICATION = 0xa2 )
|
|
* @mac_id: interface ID
|
|
* @consec_missed_beacons_since_last_rx: number of consecutive missed
|
|
* beacons since last RX.
|
|
* @consec_missed_beacons: number of consecutive missed beacons
|
|
* @num_expected_beacons:
|
|
* @num_recvd_beacons:
|
|
*/
|
|
struct iwx_missed_beacons_notif {
|
|
uint32_t mac_id;
|
|
uint32_t consec_missed_beacons_since_last_rx;
|
|
uint32_t consec_missed_beacons;
|
|
uint32_t num_expected_beacons;
|
|
uint32_t num_recvd_beacons;
|
|
} __packed; /* IWX_MISSED_BEACON_NTFY_API_S_VER_3 */
|
|
|
|
/**
|
|
* struct iwx_mfuart_load_notif - mfuart image version & status
|
|
* ( IWX_MFUART_LOAD_NOTIFICATION = 0xb1 )
|
|
* @installed_ver: installed image version
|
|
* @external_ver: external image version
|
|
* @status: MFUART loading status
|
|
* @duration: MFUART loading time
|
|
*/
|
|
struct iwx_mfuart_load_notif {
|
|
uint32_t installed_ver;
|
|
uint32_t external_ver;
|
|
uint32_t status;
|
|
uint32_t duration;
|
|
} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
|
|
|
|
/**
|
|
* struct iwx_set_calib_default_cmd - set default value for calibration.
|
|
* ( IWX_SET_CALIB_DEFAULT_CMD = 0x8e )
|
|
* @calib_index: the calibration to set value for
|
|
* @length: of data
|
|
* @data: the value to set for the calibration result
|
|
*/
|
|
struct iwx_set_calib_default_cmd {
|
|
uint16_t calib_index;
|
|
uint16_t length;
|
|
uint8_t data[0];
|
|
} __packed; /* IWX_PHY_CALIB_OVERRIDE_VALUES_S */
|
|
|
|
#define IWX_MAX_PORT_ID_NUM 2
|
|
#define IWX_MAX_MCAST_FILTERING_ADDRESSES 256
|
|
|
|
/**
|
|
* struct iwx_mcast_filter_cmd - configure multicast filter.
|
|
* @filter_own: Set 1 to filter out multicast packets sent by station itself
|
|
* @port_id: Multicast MAC addresses array specifier. This is a strange way
|
|
* to identify network interface adopted in host-device IF.
|
|
* It is used by FW as index in array of addresses. This array has
|
|
* IWX_MAX_PORT_ID_NUM members.
|
|
* @count: Number of MAC addresses in the array
|
|
* @pass_all: Set 1 to pass all multicast packets.
|
|
* @bssid: current association BSSID.
|
|
* @addr_list: Place holder for array of MAC addresses.
|
|
* IMPORTANT: add padding if necessary to ensure DWORD alignment.
|
|
*/
|
|
struct iwx_mcast_filter_cmd {
|
|
uint8_t filter_own;
|
|
uint8_t port_id;
|
|
uint8_t count;
|
|
uint8_t pass_all;
|
|
uint8_t bssid[6];
|
|
uint8_t reserved[2];
|
|
uint8_t addr_list[0];
|
|
} __packed; /* IWX_MCAST_FILTERING_CMD_API_S_VER_1 */
|
|
|
|
struct iwx_statistics_dbg {
|
|
uint32_t burst_check;
|
|
uint32_t burst_count;
|
|
uint32_t wait_for_silence_timeout_cnt;
|
|
uint32_t reserved[3];
|
|
} __packed; /* IWX_STATISTICS_DEBUG_API_S_VER_2 */
|
|
|
|
struct iwx_statistics_div {
|
|
uint32_t tx_on_a;
|
|
uint32_t tx_on_b;
|
|
uint32_t exec_time;
|
|
uint32_t probe_time;
|
|
uint32_t rssi_ant;
|
|
uint32_t reserved2;
|
|
} __packed; /* IWX_STATISTICS_SLOW_DIV_API_S_VER_2 */
|
|
|
|
struct iwx_statistics_bt_activity {
|
|
uint32_t hi_priority_tx_req_cnt;
|
|
uint32_t hi_priority_tx_denied_cnt;
|
|
uint32_t lo_priority_tx_req_cnt;
|
|
uint32_t lo_priority_tx_denied_cnt;
|
|
uint32_t hi_priority_rx_req_cnt;
|
|
uint32_t hi_priority_rx_denied_cnt;
|
|
uint32_t lo_priority_rx_req_cnt;
|
|
uint32_t lo_priority_rx_denied_cnt;
|
|
} __packed; /* IWX_STATISTICS_BT_ACTIVITY_API_S_VER_1 */
|
|
|
|
struct iwx_statistics_general_common {
|
|
uint32_t radio_temperature;
|
|
struct iwx_statistics_dbg dbg;
|
|
uint32_t sleep_time;
|
|
uint32_t slots_out;
|
|
uint32_t slots_idle;
|
|
uint32_t ttl_timestamp;
|
|
struct iwx_statistics_div slow_div;
|
|
uint32_t rx_enable_counter;
|
|
/*
|
|
* num_of_sos_states:
|
|
* count the number of times we have to re-tune
|
|
* in order to get out of bad PHY status
|
|
*/
|
|
uint32_t num_of_sos_states;
|
|
uint32_t beacon_filtered;
|
|
uint32_t missed_beacons;
|
|
uint8_t beacon_filter_average_energy;
|
|
uint8_t beacon_filter_reason;
|
|
uint8_t beacon_filter_current_energy;
|
|
uint8_t beacon_filter_reserved;
|
|
uint32_t beacon_filter_delta_time;
|
|
struct iwx_statistics_bt_activity bt_activity;
|
|
uint64_t rx_time;
|
|
uint64_t on_time_rf;
|
|
uint64_t on_time_scan;
|
|
uint64_t tx_time;
|
|
} __packed; /* STATISTICS_GENERAL_API_S_VER_10 */
|
|
|
|
struct iwx_statistics_rx_non_phy {
|
|
uint32_t bogus_cts; /* CTS received when not expecting CTS */
|
|
uint32_t bogus_ack; /* ACK received when not expecting ACK */
|
|
uint32_t non_bssid_frames; /* number of frames with BSSID that
|
|
* doesn't belong to the STA BSSID */
|
|
uint32_t filtered_frames; /* count frames that were dumped in the
|
|
* filtering process */
|
|
uint32_t non_channel_beacons; /* beacons with our bss id but not on
|
|
* our serving channel */
|
|
uint32_t channel_beacons; /* beacons with our bss id and in our
|
|
* serving channel */
|
|
uint32_t num_missed_bcon; /* number of missed beacons */
|
|
uint32_t adc_rx_saturation_time; /* count in 0.8us units the time the
|
|
* ADC was in saturation */
|
|
uint32_t ina_detection_search_time;/* total time (in 0.8us) searched
|
|
* for INA */
|
|
uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */
|
|
uint32_t interference_data_flag; /* flag for interference data
|
|
* availability. 1 when data is
|
|
* available. */
|
|
uint32_t channel_load; /* counts RX Enable time in uSec */
|
|
uint32_t dsp_false_alarms; /* DSP false alarm (both OFDM
|
|
* and CCK) counter */
|
|
uint32_t beacon_rssi_a;
|
|
uint32_t beacon_rssi_b;
|
|
uint32_t beacon_rssi_c;
|
|
uint32_t beacon_energy_a;
|
|
uint32_t beacon_energy_b;
|
|
uint32_t beacon_energy_c;
|
|
uint32_t num_bt_kills;
|
|
uint32_t mac_id;
|
|
uint32_t directed_data_mpdu;
|
|
} __packed; /* IWX_STATISTICS_RX_NON_PHY_API_S_VER_3 */
|
|
|
|
struct iwx_statistics_rx_phy {
|
|
uint32_t ina_cnt;
|
|
uint32_t fina_cnt;
|
|
uint32_t plcp_err;
|
|
uint32_t crc32_err;
|
|
uint32_t overrun_err;
|
|
uint32_t early_overrun_err;
|
|
uint32_t crc32_good;
|
|
uint32_t false_alarm_cnt;
|
|
uint32_t fina_sync_err_cnt;
|
|
uint32_t sfd_timeout;
|
|
uint32_t fina_timeout;
|
|
uint32_t unresponded_rts;
|
|
uint32_t rxe_frame_limit_overrun;
|
|
uint32_t sent_ack_cnt;
|
|
uint32_t sent_cts_cnt;
|
|
uint32_t sent_ba_rsp_cnt;
|
|
uint32_t dsp_self_kill;
|
|
uint32_t mh_format_err;
|
|
uint32_t re_acq_main_rssi_sum;
|
|
uint32_t reserved;
|
|
} __packed; /* IWX_STATISTICS_RX_PHY_API_S_VER_2 */
|
|
|
|
struct iwx_statistics_rx_ht_phy {
|
|
uint32_t plcp_err;
|
|
uint32_t overrun_err;
|
|
uint32_t early_overrun_err;
|
|
uint32_t crc32_good;
|
|
uint32_t crc32_err;
|
|
uint32_t mh_format_err;
|
|
uint32_t agg_crc32_good;
|
|
uint32_t agg_mpdu_cnt;
|
|
uint32_t agg_cnt;
|
|
uint32_t unsupport_mcs;
|
|
} __packed; /* IWX_STATISTICS_HT_RX_PHY_API_S_VER_1 */
|
|
|
|
/*
|
|
* The first MAC indices (starting from 0)
|
|
* are available to the driver, AUX follows
|
|
*/
|
|
#define IWX_MAC_INDEX_AUX 4
|
|
#define IWX_MAC_INDEX_MIN_DRIVER 0
|
|
#define IWX_NUM_MAC_INDEX_DRIVER IWX_MAC_INDEX_AUX
|
|
|
|
#define IWX_STATION_COUNT 16
|
|
|
|
#define IWX_MAX_CHAINS 3
|
|
|
|
struct iwx_statistics_tx_non_phy_agg {
|
|
uint32_t ba_timeout;
|
|
uint32_t ba_reschedule_frames;
|
|
uint32_t scd_query_agg_frame_cnt;
|
|
uint32_t scd_query_no_agg;
|
|
uint32_t scd_query_agg;
|
|
uint32_t scd_query_mismatch;
|
|
uint32_t frame_not_ready;
|
|
uint32_t underrun;
|
|
uint32_t bt_prio_kill;
|
|
uint32_t rx_ba_rsp_cnt;
|
|
int8_t txpower[IWX_MAX_CHAINS];
|
|
int8_t reserved;
|
|
uint32_t reserved2;
|
|
} __packed; /* IWX_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */
|
|
|
|
struct iwx_statistics_tx_channel_width {
|
|
uint32_t ext_cca_narrow_ch20[1];
|
|
uint32_t ext_cca_narrow_ch40[2];
|
|
uint32_t ext_cca_narrow_ch80[3];
|
|
uint32_t ext_cca_narrow_ch160[4];
|
|
uint32_t last_tx_ch_width_indx;
|
|
uint32_t rx_detected_per_ch_width[4];
|
|
uint32_t success_per_ch_width[4];
|
|
uint32_t fail_per_ch_width[4];
|
|
}; /* IWX_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */
|
|
|
|
struct iwx_statistics_tx {
|
|
uint32_t preamble_cnt;
|
|
uint32_t rx_detected_cnt;
|
|
uint32_t bt_prio_defer_cnt;
|
|
uint32_t bt_prio_kill_cnt;
|
|
uint32_t few_bytes_cnt;
|
|
uint32_t cts_timeout;
|
|
uint32_t ack_timeout;
|
|
uint32_t expected_ack_cnt;
|
|
uint32_t actual_ack_cnt;
|
|
uint32_t dump_msdu_cnt;
|
|
uint32_t burst_abort_next_frame_mismatch_cnt;
|
|
uint32_t burst_abort_missing_next_frame_cnt;
|
|
uint32_t cts_timeout_collision;
|
|
uint32_t ack_or_ba_timeout_collision;
|
|
struct iwx_statistics_tx_non_phy_agg agg;
|
|
struct iwx_statistics_tx_channel_width channel_width;
|
|
} __packed; /* IWX_STATISTICS_TX_API_S_VER_4 */
|
|
|
|
struct iwx_statistics_general {
|
|
struct iwx_statistics_general_common common;
|
|
uint32_t beacon_counter[IWX_MAC_INDEX_AUX];
|
|
uint8_t beacon_average_energy[IWX_MAC_INDEX_AUX];
|
|
uint8_t reserved[8 - IWX_MAC_INDEX_AUX];
|
|
} __packed; /* STATISTICS_GENERAL_API_S_VER_10 */
|
|
|
|
struct iwx_statistics_rx {
|
|
struct iwx_statistics_rx_phy ofdm;
|
|
struct iwx_statistics_rx_phy cck;
|
|
struct iwx_statistics_rx_non_phy general;
|
|
struct iwx_statistics_rx_ht_phy ofdm_ht;
|
|
} __packed; /* IWX_STATISTICS_RX_API_S_VER_3 */
|
|
|
|
/*
|
|
* IWX_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
|
|
*
|
|
* By default, uCode issues this notification after receiving a beacon
|
|
* while associated. To disable this behavior, set DISABLE_NOTIF flag in the
|
|
* IWX_REPLY_STATISTICS_CMD 0x9c, above.
|
|
*
|
|
* Statistics counters continue to increment beacon after beacon, but are
|
|
* cleared when changing channels or when driver issues IWX_REPLY_STATISTICS_CMD
|
|
* 0x9c with CLEAR_STATS bit set (see above).
|
|
*
|
|
* uCode also issues this notification during scans. uCode clears statistics
|
|
* appropriately so that each notification contains statistics for only the
|
|
* one channel that has just been scanned.
|
|
*/
|
|
|
|
/**
|
|
* struct iwx_statistics_load - RX statistics for multi-queue devices
|
|
* @air_time: accumulated air time, per mac
|
|
* @byte_count: accumulated byte count, per mac
|
|
* @pkt_count: accumulated packet count, per mac
|
|
* @avg_energy: average RSSI, per station
|
|
*/
|
|
struct iwx_statistics_load {
|
|
uint32_t air_time[IWX_MAC_INDEX_AUX];
|
|
uint32_t byte_count[IWX_MAC_INDEX_AUX];
|
|
uint32_t pkt_count[IWX_MAC_INDEX_AUX];
|
|
uint8_t avg_energy[IWX_STATION_COUNT];
|
|
} __packed; /* STATISTICS_RX_MAC_STATION_S_VER_3 */
|
|
|
|
struct iwx_notif_statistics {
|
|
uint32_t flag;
|
|
struct iwx_statistics_rx rx;
|
|
struct iwx_statistics_tx tx;
|
|
struct iwx_statistics_general general;
|
|
struct iwx_statistics_load load_stats;
|
|
} __packed; /* STATISTICS_NTFY_API_S_VER_13 */
|
|
|
|
|
|
/**
|
|
* flags used in statistics notification
|
|
* @IWX_STATISTICS_REPLY_FLG_CLEAR: statistics were cleared after this report
|
|
*/
|
|
#define IWX_STATISTICS_REPLY_FLG_CLEAR 0x01
|
|
|
|
/**
|
|
* flags used in statistics command
|
|
* @IWX_STATISTICS_FLG_CLEAR: request to clear statistics after the report
|
|
* that's sent after this command
|
|
* @IWX_STATISTICS_FLG_DISABLE_NOTIF: disable unilateral statistics
|
|
* notifications
|
|
*/
|
|
#define IWX_STATISTICS_FLG_CLEAR 0x01
|
|
#define IWX_STATISTICS_FLG_DISABLE_NOTIF 0x02
|
|
|
|
/**
|
|
* struct iwx_statistics_cmd - statistics config command
|
|
* @flags: IWX_STATISTICS_* flags
|
|
*/
|
|
struct iwx_statistics_cmd {
|
|
uint32_t flags;
|
|
} __packed; /* STATISTICS_CMD_API_S_VER_1 */
|
|
|
|
|
|
/***********************************
|
|
* Smart Fifo API
|
|
***********************************/
|
|
/* Smart Fifo state */
|
|
#define IWX_SF_LONG_DELAY_ON 0 /* should never be called by driver */
|
|
#define IWX_SF_FULL_ON 1
|
|
#define IWX_SF_UNINIT 2
|
|
#define IWX_SF_INIT_OFF 3
|
|
#define IWX_SF_HW_NUM_STATES 4
|
|
|
|
/* Smart Fifo possible scenario */
|
|
#define IWX_SF_SCENARIO_SINGLE_UNICAST 0
|
|
#define IWX_SF_SCENARIO_AGG_UNICAST 1
|
|
#define IWX_SF_SCENARIO_MULTICAST 2
|
|
#define IWX_SF_SCENARIO_BA_RESP 3
|
|
#define IWX_SF_SCENARIO_TX_RESP 4
|
|
#define IWX_SF_NUM_SCENARIO 5
|
|
|
|
#define IWX_SF_TRANSIENT_STATES_NUMBER 2 /* IWX_SF_LONG_DELAY_ON and IWX_SF_FULL_ON */
|
|
#define IWX_SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */
|
|
|
|
/* smart FIFO default values */
|
|
#define IWX_SF_W_MARK_SISO 4096
|
|
#define IWX_SF_W_MARK_MIMO2 8192
|
|
#define IWX_SF_W_MARK_MIMO3 6144
|
|
#define IWX_SF_W_MARK_LEGACY 4096
|
|
#define IWX_SF_W_MARK_SCAN 4096
|
|
|
|
/* SF Scenarios timers for default configuration (aligned to 32 uSec) */
|
|
#define IWX_SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
|
|
#define IWX_SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
|
|
#define IWX_SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
|
|
#define IWX_SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
|
|
#define IWX_SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */
|
|
#define IWX_SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
|
|
#define IWX_SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */
|
|
#define IWX_SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */
|
|
#define IWX_SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */
|
|
#define IWX_SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */
|
|
|
|
/* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */
|
|
#define IWX_SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */
|
|
#define IWX_SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */
|
|
#define IWX_SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */
|
|
#define IWX_SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */
|
|
#define IWX_SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */
|
|
#define IWX_SF_MCAST_AGING_TIMER 10016 /* 10 mSec */
|
|
#define IWX_SF_BA_IDLE_TIMER 320 /* 300 uSec */
|
|
#define IWX_SF_BA_AGING_TIMER 2016 /* 2 mSec */
|
|
#define IWX_SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */
|
|
#define IWX_SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */
|
|
|
|
#define IWX_SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */
|
|
|
|
#define IWX_SF_CFG_DUMMY_NOTIF_OFF (1 << 16)
|
|
|
|
/**
|
|
* Smart Fifo configuration command.
|
|
* @state: smart fifo state, types listed in enum %iwx_sf_state.
|
|
* @watermark: Minimum allowed available free space in RXF for transient state.
|
|
* @long_delay_timeouts: aging and idle timer values for each scenario
|
|
* in long delay state.
|
|
* @full_on_timeouts: timer values for each scenario in full on state.
|
|
*/
|
|
struct iwx_sf_cfg_cmd {
|
|
uint32_t state;
|
|
uint32_t watermark[IWX_SF_TRANSIENT_STATES_NUMBER];
|
|
uint32_t long_delay_timeouts[IWX_SF_NUM_SCENARIO][IWX_SF_NUM_TIMEOUT_TYPES];
|
|
uint32_t full_on_timeouts[IWX_SF_NUM_SCENARIO][IWX_SF_NUM_TIMEOUT_TYPES];
|
|
} __packed; /* IWX_SF_CFG_API_S_VER_2 */
|
|
|
|
#define IWX_AC_BK 0
|
|
#define IWX_AC_BE 1
|
|
#define IWX_AC_VI 2
|
|
#define IWX_AC_VO 3
|
|
#define IWX_AC_NUM 4
|
|
|
|
/**
|
|
* MAC context flags
|
|
* @IWX_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
|
|
* this will require CCK RTS/CTS2self.
|
|
* RTS/CTS will protect full burst time.
|
|
* @IWX_MAC_PROT_FLG_HT_PROT: enable HT protection
|
|
* @IWX_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
|
|
* @IWX_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
|
|
*/
|
|
#define IWX_MAC_PROT_FLG_TGG_PROTECT (1 << 3)
|
|
#define IWX_MAC_PROT_FLG_HT_PROT (1 << 23)
|
|
#define IWX_MAC_PROT_FLG_FAT_PROT (1 << 24)
|
|
#define IWX_MAC_PROT_FLG_SELF_CTS_EN (1 << 30)
|
|
|
|
#define IWX_MAC_FLG_SHORT_SLOT (1 << 4)
|
|
#define IWX_MAC_FLG_SHORT_PREAMBLE (1 << 5)
|
|
|
|
/**
|
|
* Supported MAC types
|
|
* @IWX_FW_MAC_TYPE_FIRST: lowest supported MAC type
|
|
* @IWX_FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
|
|
* @IWX_FW_MAC_TYPE_LISTENER: monitor MAC type (?)
|
|
* @IWX_FW_MAC_TYPE_PIBSS: Pseudo-IBSS
|
|
* @IWX_FW_MAC_TYPE_IBSS: IBSS
|
|
* @IWX_FW_MAC_TYPE_BSS_STA: BSS (managed) station
|
|
* @IWX_FW_MAC_TYPE_P2P_DEVICE: P2P Device
|
|
* @IWX_FW_MAC_TYPE_P2P_STA: P2P client
|
|
* @IWX_FW_MAC_TYPE_GO: P2P GO
|
|
* @IWX_FW_MAC_TYPE_TEST: ?
|
|
* @IWX_FW_MAC_TYPE_MAX: highest support MAC type
|
|
*/
|
|
#define IWX_FW_MAC_TYPE_FIRST 1
|
|
#define IWX_FW_MAC_TYPE_AUX IWX_FW_MAC_TYPE_FIRST
|
|
#define IWX_FW_MAC_TYPE_LISTENER 2
|
|
#define IWX_FW_MAC_TYPE_PIBSS 3
|
|
#define IWX_FW_MAC_TYPE_IBSS 4
|
|
#define IWX_FW_MAC_TYPE_BSS_STA 5
|
|
#define IWX_FW_MAC_TYPE_P2P_DEVICE 6
|
|
#define IWX_FW_MAC_TYPE_P2P_STA 7
|
|
#define IWX_FW_MAC_TYPE_GO 8
|
|
#define IWX_FW_MAC_TYPE_TEST 9
|
|
#define IWX_FW_MAC_TYPE_MAX IWX_FW_MAC_TYPE_TEST
|
|
/* IWX_MAC_CONTEXT_TYPE_API_E_VER_1 */
|
|
|
|
/**
|
|
* TSF hw timer ID
|
|
* @IWX_TSF_ID_A: use TSF A
|
|
* @IWX_TSF_ID_B: use TSF B
|
|
* @IWX_TSF_ID_C: use TSF C
|
|
* @IWX_TSF_ID_D: use TSF D
|
|
* @IWX_NUM_TSF_IDS: number of TSF timers available
|
|
*/
|
|
#define IWX_TSF_ID_A 0
|
|
#define IWX_TSF_ID_B 1
|
|
#define IWX_TSF_ID_C 2
|
|
#define IWX_TSF_ID_D 3
|
|
#define IWX_NUM_TSF_IDS 4
|
|
/* IWX_TSF_ID_API_E_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_mac_data_ap - configuration data for AP MAC context
|
|
* @beacon_time: beacon transmit time in system time
|
|
* @beacon_tsf: beacon transmit time in TSF
|
|
* @bi: beacon interval in TU
|
|
* @bi_reciprocal: 2^32 / bi
|
|
* @dtim_interval: dtim transmit time in TU
|
|
* @dtim_reciprocal: 2^32 / dtim_interval
|
|
* @mcast_qid: queue ID for multicast traffic
|
|
* NOTE: obsolete from VER2 and on
|
|
* @beacon_template: beacon template ID
|
|
*/
|
|
struct iwx_mac_data_ap {
|
|
uint32_t beacon_time;
|
|
uint64_t beacon_tsf;
|
|
uint32_t bi;
|
|
uint32_t bi_reciprocal;
|
|
uint32_t dtim_interval;
|
|
uint32_t dtim_reciprocal;
|
|
uint32_t mcast_qid;
|
|
uint32_t beacon_template;
|
|
} __packed; /* AP_MAC_DATA_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_mac_data_ibss - configuration data for IBSS MAC context
|
|
* @beacon_time: beacon transmit time in system time
|
|
* @beacon_tsf: beacon transmit time in TSF
|
|
* @bi: beacon interval in TU
|
|
* @bi_reciprocal: 2^32 / bi
|
|
* @beacon_template: beacon template ID
|
|
*/
|
|
struct iwx_mac_data_ibss {
|
|
uint32_t beacon_time;
|
|
uint64_t beacon_tsf;
|
|
uint32_t bi;
|
|
uint32_t bi_reciprocal;
|
|
uint32_t beacon_template;
|
|
} __packed; /* IBSS_MAC_DATA_API_S_VER_1 */
|
|
|
|
/**
|
|
* enum iwx_mac_data_policy - policy of the data path for this MAC
|
|
* @TWT_SUPPORTED: twt is supported
|
|
* @MORE_DATA_ACK_SUPPORTED: AP supports More Data Ack according to
|
|
* paragraph 9.4.1.17 in P802.11ax_D4 specification. Used for TWT
|
|
* early termination detection.
|
|
* @FLEXIBLE_TWT_SUPPORTED: AP supports flexible TWT schedule
|
|
* @PROTECTED_TWT_SUPPORTED: AP supports protected TWT frames (with 11w)
|
|
* @BROADCAST_TWT_SUPPORTED: AP and STA support broadcast TWT
|
|
* @COEX_HIGH_PRIORITY_ENABLE: high priority mode for BT coex, to be used
|
|
* during 802.1X negotiation (and allowed during 4-way-HS)
|
|
*/
|
|
#define IWX_TWT_SUPPORTED BIT (1 << 0)
|
|
#define IWX_MORE_DATA_ACK_SUPPORTED (1 << 1)
|
|
#define IWX_FLEXIBLE_TWT_SUPPORTED (1 << 2)
|
|
#define IWX_PROTECTED_TWT_SUPPORTED (1 << 3)
|
|
#define IWX_BROADCAST_TWT_SUPPORTED (1 << 4)
|
|
#define IWX_COEX_HIGH_PRIORITY_ENABLE (1 << 5)
|
|
|
|
/**
|
|
* struct iwx_mac_data_sta - configuration data for station MAC context
|
|
* @is_assoc: 1 for associated state, 0 otherwise
|
|
* @dtim_time: DTIM arrival time in system time
|
|
* @dtim_tsf: DTIM arrival time in TSF
|
|
* @bi: beacon interval in TU, applicable only when associated
|
|
* @data_policy: see &enum iwl_mac_data_policy
|
|
* @dtim_interval: DTIM interval in TU, applicable only when associated
|
|
* @listen_interval: in beacon intervals, applicable only when associated
|
|
* @assoc_id: unique ID assigned by the AP during association
|
|
*/
|
|
struct iwx_mac_data_sta {
|
|
uint32_t is_assoc;
|
|
uint32_t dtim_time;
|
|
uint64_t dtim_tsf;
|
|
uint32_t bi;
|
|
uint32_t reserved1;
|
|
uint32_t dtim_interval;
|
|
uint32_t data_policy;
|
|
uint32_t listen_interval;
|
|
uint32_t assoc_id;
|
|
uint32_t assoc_beacon_arrive_time;
|
|
} __packed; /* IWX_STA_MAC_DATA_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_mac_data_go - configuration data for P2P GO MAC context
|
|
* @ap: iwx_mac_data_ap struct with most config data
|
|
* @ctwin: client traffic window in TU (period after TBTT when GO is present).
|
|
* 0 indicates that there is no CT window.
|
|
* @opp_ps_enabled: indicate that opportunistic PS allowed
|
|
*/
|
|
struct iwx_mac_data_go {
|
|
struct iwx_mac_data_ap ap;
|
|
uint32_t ctwin;
|
|
uint32_t opp_ps_enabled;
|
|
} __packed; /* GO_MAC_DATA_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_mac_data_p2p_sta - configuration data for P2P client MAC context
|
|
* @sta: iwx_mac_data_sta struct with most config data
|
|
* @ctwin: client traffic window in TU (period after TBTT when GO is present).
|
|
* 0 indicates that there is no CT window.
|
|
*/
|
|
struct iwx_mac_data_p2p_sta {
|
|
struct iwx_mac_data_sta sta;
|
|
uint32_t ctwin;
|
|
} __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_mac_data_pibss - Pseudo IBSS config data
|
|
* @stats_interval: interval in TU between statistics notifications to host.
|
|
*/
|
|
struct iwx_mac_data_pibss {
|
|
uint32_t stats_interval;
|
|
} __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */
|
|
|
|
/*
|
|
* struct iwx_mac_data_p2p_dev - configuration data for the P2P Device MAC
|
|
* context.
|
|
* @is_disc_extended: if set to true, P2P Device discoverability is enabled on
|
|
* other channels as well. This should be to true only in case that the
|
|
* device is discoverable and there is an active GO. Note that setting this
|
|
* field when not needed, will increase the number of interrupts and have
|
|
* effect on the platform power, as this setting opens the Rx filters on
|
|
* all macs.
|
|
*/
|
|
struct iwx_mac_data_p2p_dev {
|
|
uint32_t is_disc_extended;
|
|
} __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */
|
|
|
|
/**
|
|
* MAC context filter flags
|
|
* @IWX_MAC_FILTER_IN_PROMISC: accept all data frames
|
|
* @IWX_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and
|
|
* control frames to the host
|
|
* @IWX_MAC_FILTER_ACCEPT_GRP: accept multicast frames
|
|
* @IWX_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
|
|
* @IWX_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
|
|
* @IWX_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
|
|
* (in station mode when associated)
|
|
* @IWX_MAC_FILTER_OUT_BCAST: filter out all broadcast frames
|
|
* @IWX_MAC_FILTER_IN_CRC32: extract FCS and append it to frames
|
|
* @IWX_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
|
|
*/
|
|
#define IWX_MAC_FILTER_IN_PROMISC (1 << 0)
|
|
#define IWX_MAC_FILTER_IN_CONTROL_AND_MGMT (1 << 1)
|
|
#define IWX_MAC_FILTER_ACCEPT_GRP (1 << 2)
|
|
#define IWX_MAC_FILTER_DIS_DECRYPT (1 << 3)
|
|
#define IWX_MAC_FILTER_DIS_GRP_DECRYPT (1 << 4)
|
|
#define IWX_MAC_FILTER_IN_BEACON (1 << 6)
|
|
#define IWX_MAC_FILTER_OUT_BCAST (1 << 8)
|
|
#define IWX_MAC_FILTER_IN_CRC32 (1 << 11)
|
|
#define IWX_MAC_FILTER_IN_PROBE_REQUEST (1 << 12)
|
|
|
|
/**
|
|
* QoS flags
|
|
* @IWX_MAC_QOS_FLG_UPDATE_EDCA: ?
|
|
* @IWX_MAC_QOS_FLG_TGN: HT is enabled
|
|
* @IWX_MAC_QOS_FLG_TXOP_TYPE: ?
|
|
*
|
|
*/
|
|
#define IWX_MAC_QOS_FLG_UPDATE_EDCA (1 << 0)
|
|
#define IWX_MAC_QOS_FLG_TGN (1 << 1)
|
|
#define IWX_MAC_QOS_FLG_TXOP_TYPE (1 << 4)
|
|
|
|
/**
|
|
* struct iwx_ac_qos - QOS timing params for IWX_MAC_CONTEXT_CMD
|
|
* @cw_min: Contention window, start value in numbers of slots.
|
|
* Should be a power-of-2, minus 1. Device's default is 0x0f.
|
|
* @cw_max: Contention window, max value in numbers of slots.
|
|
* Should be a power-of-2, minus 1. Device's default is 0x3f.
|
|
* @aifsn: Number of slots in Arbitration Interframe Space (before
|
|
* performing random backoff timing prior to Tx). Device default 1.
|
|
* @fifos_mask: FIFOs used by this MAC for this AC
|
|
* @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
|
|
*
|
|
* One instance of this config struct for each of 4 EDCA access categories
|
|
* in struct iwx_qosparam_cmd.
|
|
*
|
|
* Device will automatically increase contention window by (2*CW) + 1 for each
|
|
* transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
|
|
* value, to cap the CW value.
|
|
*/
|
|
struct iwx_ac_qos {
|
|
uint16_t cw_min;
|
|
uint16_t cw_max;
|
|
uint8_t aifsn;
|
|
uint8_t fifos_mask;
|
|
uint16_t edca_txop;
|
|
} __packed; /* IWX_AC_QOS_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_mac_ctx_cmd - command structure to configure MAC contexts
|
|
* ( IWX_MAC_CONTEXT_CMD = 0x28 )
|
|
* @id_and_color: ID and color of the MAC
|
|
* @action: action to perform, one of IWX_FW_CTXT_ACTION_*
|
|
* @mac_type: one of IWX_FW_MAC_TYPE_*
|
|
* @tsf_id: TSF HW timer, one of IWX_TSF_ID_*
|
|
* @node_addr: MAC address
|
|
* @bssid_addr: BSSID
|
|
* @cck_rates: basic rates available for CCK
|
|
* @ofdm_rates: basic rates available for OFDM
|
|
* @protection_flags: combination of IWX_MAC_PROT_FLG_FLAG_*
|
|
* @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
|
|
* @short_slot: 0x10 for enabling short slots, 0 otherwise
|
|
* @filter_flags: combination of IWX_MAC_FILTER_*
|
|
* @qos_flags: from IWX_MAC_QOS_FLG_*
|
|
* @ac: one iwx_mac_qos configuration for each AC
|
|
* @mac_specific: one of struct iwx_mac_data_*, according to mac_type
|
|
*/
|
|
struct iwx_mac_ctx_cmd {
|
|
/* COMMON_INDEX_HDR_API_S_VER_1 */
|
|
uint32_t id_and_color;
|
|
uint32_t action;
|
|
/* IWX_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
|
|
uint32_t mac_type;
|
|
uint32_t tsf_id;
|
|
uint8_t node_addr[6];
|
|
uint16_t reserved_for_node_addr;
|
|
uint8_t bssid_addr[6];
|
|
uint16_t reserved_for_bssid_addr;
|
|
uint32_t cck_rates;
|
|
uint32_t ofdm_rates;
|
|
uint32_t protection_flags;
|
|
uint32_t cck_short_preamble;
|
|
uint32_t short_slot;
|
|
uint32_t filter_flags;
|
|
/* IWX_MAC_QOS_PARAM_API_S_VER_1 */
|
|
uint32_t qos_flags;
|
|
struct iwx_ac_qos ac[IWX_AC_NUM+1];
|
|
/* IWX_MAC_CONTEXT_COMMON_DATA_API_S */
|
|
union {
|
|
struct iwx_mac_data_ap ap;
|
|
struct iwx_mac_data_go go;
|
|
struct iwx_mac_data_sta sta;
|
|
struct iwx_mac_data_p2p_sta p2p_sta;
|
|
struct iwx_mac_data_p2p_dev p2p_dev;
|
|
struct iwx_mac_data_pibss pibss;
|
|
struct iwx_mac_data_ibss ibss;
|
|
};
|
|
} __packed; /* IWX_MAC_CONTEXT_CMD_API_S_VER_1 */
|
|
|
|
static inline uint32_t iwx_reciprocal(uint32_t v)
|
|
{
|
|
if (!v)
|
|
return 0;
|
|
return 0xFFFFFFFF / v;
|
|
}
|
|
|
|
/* Power Management Commands, Responses, Notifications */
|
|
|
|
/**
|
|
* masks for LTR config command flags
|
|
* @IWX_LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
|
|
* @IWX_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
|
|
* memory access
|
|
* @IWX_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
|
|
* reg change
|
|
* @IWX_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
|
|
* D0 to D3
|
|
* @IWX_LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
|
|
* @IWX_LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
|
|
* @IWX_LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
|
|
*/
|
|
#define IWX_LTR_CFG_FLAG_FEATURE_ENABLE 0x00000001
|
|
#define IWX_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS 0x00000002
|
|
#define IWX_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH 0x00000004
|
|
#define IWX_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 0x00000008
|
|
#define IWX_LTR_CFG_FLAG_SW_SET_SHORT 0x00000010
|
|
#define IWX_LTR_CFG_FLAG_SW_SET_LONG 0x00000020
|
|
#define IWX_LTR_CFG_FLAG_DENIE_C10_ON_PD 0x00000040
|
|
|
|
#define IWX_LTR_VALID_STATES_NUM 4
|
|
|
|
/**
|
|
* struct iwx_ltr_config_cmd - configures the LTR
|
|
* @flags: See %enum iwx_ltr_config_flags
|
|
* @static_long:
|
|
* @static_short:
|
|
* @ltr_cfg_values:
|
|
* @ltr_short_idle_timeout:
|
|
*/
|
|
struct iwx_ltr_config_cmd {
|
|
uint32_t flags;
|
|
uint32_t static_long;
|
|
uint32_t static_short;
|
|
uint32_t ltr_cfg_values[IWX_LTR_VALID_STATES_NUM];
|
|
uint32_t ltr_short_idle_timeout;
|
|
} __packed; /* LTR_CAPABLE_API_S_VER_2 */
|
|
|
|
/* Radio LP RX Energy Threshold measured in dBm */
|
|
#define IWX_POWER_LPRX_RSSI_THRESHOLD 75
|
|
#define IWX_POWER_LPRX_RSSI_THRESHOLD_MAX 94
|
|
#define IWX_POWER_LPRX_RSSI_THRESHOLD_MIN 30
|
|
|
|
/**
|
|
* Masks for iwx_mac_power_cmd command flags
|
|
* @IWX_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
|
|
* receiver and transmitter. '0' - does not allow.
|
|
* @IWX_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
|
|
* '1' Driver enables PM (use rest of parameters)
|
|
* @IWX_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
|
|
* '1' PM could sleep over DTIM till listen Interval.
|
|
* @IWX_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
|
|
* access categories are both delivery and trigger enabled.
|
|
* @IWX_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
|
|
* PBW Snoozing enabled
|
|
* @IWX_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
|
|
* @IWX_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
|
|
* @IWX_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
|
|
* detection enablement
|
|
*/
|
|
#define IWX_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0)
|
|
#define IWX_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK (1 << 1)
|
|
#define IWX_POWER_FLAGS_SKIP_OVER_DTIM_MSK (1 << 2)
|
|
#define IWX_POWER_FLAGS_SNOOZE_ENA_MSK (1 << 5)
|
|
#define IWX_POWER_FLAGS_BT_SCO_ENA (1 << 8)
|
|
#define IWX_POWER_FLAGS_ADVANCE_PM_ENA_MSK (1 << 9)
|
|
#define IWX_POWER_FLAGS_LPRX_ENA_MSK (1 << 11)
|
|
#define IWX_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK (1 << 12)
|
|
|
|
#define IWX_POWER_VEC_SIZE 5
|
|
|
|
/**
|
|
* Masks for device power command flags
|
|
* @IWX_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK:
|
|
* '1' Allow to save power by turning off receiver and transmitter.
|
|
* '0' Do not allow. This flag should be always set to '1' unless
|
|
* one needs to disable actual power down for debug purposes.
|
|
* @IWX_DEVICE_POWER_FLAGS_CAM_MSK:
|
|
* '1' CAM (Continuous Active Mode) is set, power management is disabled.
|
|
* '0' Power management is enabled, one of the power schemes is applied.
|
|
*/
|
|
#define IWX_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK (1 << 0)
|
|
#define IWX_DEVICE_POWER_FLAGS_CAM_MSK (1 << 13)
|
|
|
|
/**
|
|
* struct iwx_device_power_cmd - device wide power command.
|
|
* IWX_POWER_TABLE_CMD = 0x77 (command, has simple generic response)
|
|
*
|
|
* @flags: Power table command flags from IWX_DEVICE_POWER_FLAGS_*
|
|
*/
|
|
struct iwx_device_power_cmd {
|
|
/* PM_POWER_TABLE_CMD_API_S_VER_6 */
|
|
uint16_t flags;
|
|
uint16_t reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_mac_power_cmd - New power command containing uAPSD support
|
|
* IWX_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
|
|
* @id_and_color: MAC context identifier
|
|
* @flags: Power table command flags from POWER_FLAGS_*
|
|
* @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
|
|
* Minimum allowed:- 3 * DTIM. Keep alive period must be
|
|
* set regardless of power scheme or current power state.
|
|
* FW use this value also when PM is disabled.
|
|
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to
|
|
* PSM transition - legacy PM
|
|
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to
|
|
* PSM transition - legacy PM
|
|
* @sleep_interval: not in use
|
|
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag
|
|
* is set. For example, if it is required to skip over
|
|
* one DTIM, this value need to be set to 2 (DTIM periods).
|
|
* @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
|
|
* PSM transition - uAPSD
|
|
* @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
|
|
* PSM transition - uAPSD
|
|
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
|
|
* Default: 80dbm
|
|
* @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set
|
|
* @snooze_interval: Maximum time between attempts to retrieve buffered data
|
|
* from the AP [msec]
|
|
* @snooze_window: A window of time in which PBW snoozing insures that all
|
|
* packets received. It is also the minimum time from last
|
|
* received unicast RX packet, before client stops snoozing
|
|
* for data. [msec]
|
|
* @snooze_step: TBD
|
|
* @qndp_tid: TID client shall use for uAPSD QNDP triggers
|
|
* @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for
|
|
* each corresponding AC.
|
|
* Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
|
|
* @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
|
|
* values.
|
|
* @heavy_tx_thld_packets: TX threshold measured in number of packets
|
|
* @heavy_rx_thld_packets: RX threshold measured in number of packets
|
|
* @heavy_tx_thld_percentage: TX threshold measured in load's percentage
|
|
* @heavy_rx_thld_percentage: RX threshold measured in load's percentage
|
|
* @limited_ps_threshold:
|
|
*/
|
|
struct iwx_mac_power_cmd {
|
|
/* CONTEXT_DESC_API_T_VER_1 */
|
|
uint32_t id_and_color;
|
|
|
|
/* CLIENT_PM_POWER_TABLE_S_VER_1 */
|
|
uint16_t flags;
|
|
uint16_t keep_alive_seconds;
|
|
uint32_t rx_data_timeout;
|
|
uint32_t tx_data_timeout;
|
|
uint32_t rx_data_timeout_uapsd;
|
|
uint32_t tx_data_timeout_uapsd;
|
|
uint8_t lprx_rssi_threshold;
|
|
uint8_t skip_dtim_periods;
|
|
uint16_t snooze_interval;
|
|
uint16_t snooze_window;
|
|
uint8_t snooze_step;
|
|
uint8_t qndp_tid;
|
|
uint8_t uapsd_ac_flags;
|
|
uint8_t uapsd_max_sp;
|
|
uint8_t heavy_tx_thld_packets;
|
|
uint8_t heavy_rx_thld_packets;
|
|
uint8_t heavy_tx_thld_percentage;
|
|
uint8_t heavy_rx_thld_percentage;
|
|
uint8_t limited_ps_threshold;
|
|
uint8_t reserved;
|
|
} __packed;
|
|
|
|
#define IWX_DEFAULT_PS_TX_DATA_TIMEOUT (100 * 1000)
|
|
#define IWX_DEFAULT_PS_RX_DATA_TIMEOUT (100 * 1000)
|
|
|
|
/*
|
|
* struct iwx_uapsd_misbehaving_ap_notif - FW sends this notification when
|
|
* associated AP is identified as improperly implementing uAPSD protocol.
|
|
* IWX_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
|
|
* @sta_id: index of station in uCode's station table - associated AP ID in
|
|
* this context.
|
|
*/
|
|
struct iwx_uapsd_misbehaving_ap_notif {
|
|
uint32_t sta_id;
|
|
uint8_t mac_id;
|
|
uint8_t reserved[3];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_beacon_filter_cmd
|
|
* IWX_REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
|
|
* @id_and_color: MAC context identifier
|
|
* @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
|
|
* to driver if delta in Energy values calculated for this and last
|
|
* passed beacon is greater than this threshold. Zero value means that
|
|
* the Energy change is ignored for beacon filtering, and beacon will
|
|
* not be forced to be sent to driver regardless of this delta. Typical
|
|
* energy delta 5dB.
|
|
* @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
|
|
* Send beacon to driver if delta in Energy values calculated for this
|
|
* and last passed beacon is greater than this threshold. Zero value
|
|
* means that the Energy change is ignored for beacon filtering while in
|
|
* Roaming state, typical energy delta 1dB.
|
|
* @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
|
|
* calculated for current beacon is less than the threshold, use
|
|
* Roaming Energy Delta Threshold, otherwise use normal Energy Delta
|
|
* Threshold. Typical energy threshold is -72dBm.
|
|
* @bf_temp_threshold: This threshold determines the type of temperature
|
|
* filtering (Slow or Fast) that is selected (Units are in Celsius):
|
|
* If the current temperature is above this threshold - Fast filter
|
|
* will be used, If the current temperature is below this threshold -
|
|
* Slow filter will be used.
|
|
* @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
|
|
* calculated for this and the last passed beacon is greater than this
|
|
* threshold. Zero value means that the temperature change is ignored for
|
|
* beacon filtering; beacons will not be forced to be sent to driver
|
|
* regardless of whether its temperature has been changed.
|
|
* @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
|
|
* calculated for this and the last passed beacon is greater than this
|
|
* threshold. Zero value means that the temperature change is ignored for
|
|
* beacon filtering; beacons will not be forced to be sent to driver
|
|
* regardless of whether its temperature has been changed.
|
|
* @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
|
|
* @bf_escape_timer: Send beacons to driver if no beacons were passed
|
|
* for a specific period of time. Units: Beacons.
|
|
* @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
|
|
* for a longer period of time then this escape-timeout. Units: Beacons.
|
|
* @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
|
|
* @bf_threshold_absolute_low: See below.
|
|
* @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated
|
|
* for this beacon crossed this absolute threshold. For the 'Increase'
|
|
* direction the bf_energy_absolute_low[i] is used. For the 'Decrease'
|
|
* direction the bf_energy_absolute_high[i] is used. Zero value means
|
|
* that this specific threshold is ignored for beacon filtering, and
|
|
* beacon will not be forced to be sent to driver due to this setting.
|
|
*/
|
|
struct iwx_beacon_filter_cmd {
|
|
uint32_t bf_energy_delta;
|
|
uint32_t bf_roaming_energy_delta;
|
|
uint32_t bf_roaming_state;
|
|
uint32_t bf_temp_threshold;
|
|
uint32_t bf_temp_fast_filter;
|
|
uint32_t bf_temp_slow_filter;
|
|
uint32_t bf_enable_beacon_filter;
|
|
uint32_t bf_debug_flag;
|
|
uint32_t bf_escape_timer;
|
|
uint32_t ba_escape_timer;
|
|
uint32_t ba_enable_beacon_abort;
|
|
uint32_t bf_threshold_absolute_low[2];
|
|
uint32_t bf_threshold_absolute_high[2];
|
|
} __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */
|
|
|
|
/* Beacon filtering and beacon abort */
|
|
#define IWX_BF_ENERGY_DELTA_DEFAULT 5
|
|
#define IWX_BF_ENERGY_DELTA_MAX 255
|
|
#define IWX_BF_ENERGY_DELTA_MIN 0
|
|
|
|
#define IWX_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
|
|
#define IWX_BF_ROAMING_ENERGY_DELTA_MAX 255
|
|
#define IWX_BF_ROAMING_ENERGY_DELTA_MIN 0
|
|
|
|
#define IWX_BF_ROAMING_STATE_DEFAULT 72
|
|
#define IWX_BF_ROAMING_STATE_MAX 255
|
|
#define IWX_BF_ROAMING_STATE_MIN 0
|
|
|
|
#define IWX_BF_TEMP_THRESHOLD_DEFAULT 112
|
|
#define IWX_BF_TEMP_THRESHOLD_MAX 255
|
|
#define IWX_BF_TEMP_THRESHOLD_MIN 0
|
|
|
|
#define IWX_BF_TEMP_FAST_FILTER_DEFAULT 1
|
|
#define IWX_BF_TEMP_FAST_FILTER_MAX 255
|
|
#define IWX_BF_TEMP_FAST_FILTER_MIN 0
|
|
|
|
#define IWX_BF_TEMP_SLOW_FILTER_DEFAULT 5
|
|
#define IWX_BF_TEMP_SLOW_FILTER_MAX 255
|
|
#define IWX_BF_TEMP_SLOW_FILTER_MIN 0
|
|
|
|
#define IWX_BF_ENABLE_BEACON_FILTER_DEFAULT 1
|
|
|
|
#define IWX_BF_DEBUG_FLAG_DEFAULT 0
|
|
|
|
#define IWX_BF_ESCAPE_TIMER_DEFAULT 50
|
|
#define IWX_BF_ESCAPE_TIMER_MAX 1024
|
|
#define IWX_BF_ESCAPE_TIMER_MIN 0
|
|
|
|
#define IWX_BA_ESCAPE_TIMER_DEFAULT 6
|
|
#define IWX_BA_ESCAPE_TIMER_D3 9
|
|
#define IWX_BA_ESCAPE_TIMER_MAX 1024
|
|
#define IWX_BA_ESCAPE_TIMER_MIN 0
|
|
|
|
#define IWX_BA_ENABLE_BEACON_ABORT_DEFAULT 1
|
|
|
|
#define IWX_BF_CMD_CONFIG_DEFAULTS \
|
|
.bf_energy_delta = htole32(IWX_BF_ENERGY_DELTA_DEFAULT), \
|
|
.bf_roaming_energy_delta = \
|
|
htole32(IWX_BF_ROAMING_ENERGY_DELTA_DEFAULT), \
|
|
.bf_roaming_state = htole32(IWX_BF_ROAMING_STATE_DEFAULT), \
|
|
.bf_temp_threshold = htole32(IWX_BF_TEMP_THRESHOLD_DEFAULT), \
|
|
.bf_temp_fast_filter = htole32(IWX_BF_TEMP_FAST_FILTER_DEFAULT), \
|
|
.bf_temp_slow_filter = htole32(IWX_BF_TEMP_SLOW_FILTER_DEFAULT), \
|
|
.bf_debug_flag = htole32(IWX_BF_DEBUG_FLAG_DEFAULT), \
|
|
.bf_escape_timer = htole32(IWX_BF_ESCAPE_TIMER_DEFAULT), \
|
|
.ba_escape_timer = htole32(IWX_BA_ESCAPE_TIMER_DEFAULT)
|
|
|
|
/* uCode API values for HT/VHT bit rates */
|
|
#define IWX_RATE_HT_SISO_MCS_0_PLCP 0
|
|
#define IWX_RATE_HT_SISO_MCS_1_PLCP 1
|
|
#define IWX_RATE_HT_SISO_MCS_2_PLCP 2
|
|
#define IWX_RATE_HT_SISO_MCS_3_PLCP 3
|
|
#define IWX_RATE_HT_SISO_MCS_4_PLCP 4
|
|
#define IWX_RATE_HT_SISO_MCS_5_PLCP 5
|
|
#define IWX_RATE_HT_SISO_MCS_6_PLCP 6
|
|
#define IWX_RATE_HT_SISO_MCS_7_PLCP 7
|
|
#define IWX_RATE_HT_MIMO2_MCS_8_PLCP 0x8
|
|
#define IWX_RATE_HT_MIMO2_MCS_9_PLCP 0x9
|
|
#define IWX_RATE_HT_MIMO2_MCS_10_PLCP 0xA
|
|
#define IWX_RATE_HT_MIMO2_MCS_11_PLCP 0xB
|
|
#define IWX_RATE_HT_MIMO2_MCS_12_PLCP 0xC
|
|
#define IWX_RATE_HT_MIMO2_MCS_13_PLCP 0xD
|
|
#define IWX_RATE_HT_MIMO2_MCS_14_PLCP 0xE
|
|
#define IWX_RATE_HT_MIMO2_MCS_15_PLCP 0xF
|
|
#define IWX_RATE_VHT_SISO_MCS_0_PLCP 0
|
|
#define IWX_RATE_VHT_SISO_MCS_1_PLCP 1
|
|
#define IWX_RATE_VHT_SISO_MCS_2_PLCP 2
|
|
#define IWX_RATE_VHT_SISO_MCS_3_PLCP 3
|
|
#define IWX_RATE_VHT_SISO_MCS_4_PLCP 4
|
|
#define IWX_RATE_VHT_SISO_MCS_5_PLCP 5
|
|
#define IWX_RATE_VHT_SISO_MCS_6_PLCP 6
|
|
#define IWX_RATE_VHT_SISO_MCS_7_PLCP 7
|
|
#define IWX_RATE_VHT_SISO_MCS_8_PLCP 8
|
|
#define IWX_RATE_VHT_SISO_MCS_9_PLCP 9
|
|
#define IWX_RATE_VHT_MIMO2_MCS_0_PLCP 0x10
|
|
#define IWX_RATE_VHT_MIMO2_MCS_1_PLCP 0x11
|
|
#define IWX_RATE_VHT_MIMO2_MCS_2_PLCP 0x12
|
|
#define IWX_RATE_VHT_MIMO2_MCS_3_PLCP 0x13
|
|
#define IWX_RATE_VHT_MIMO2_MCS_4_PLCP 0x14
|
|
#define IWX_RATE_VHT_MIMO2_MCS_5_PLCP 0x15
|
|
#define IWX_RATE_VHT_MIMO2_MCS_6_PLCP 0x16
|
|
#define IWX_RATE_VHT_MIMO2_MCS_7_PLCP 0x17
|
|
#define IWX_RATE_VHT_MIMO2_MCS_8_PLCP 0x18
|
|
#define IWX_RATE_VHT_MIMO2_MCS_9_PLCP 0x19
|
|
#define IWX_RATE_HT_SISO_MCS_INV_PLCP 0x20
|
|
#define IWX_RATE_HT_MIMO2_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP
|
|
#define IWX_RATE_VHT_SISO_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP
|
|
#define IWX_RATE_VHT_MIMO2_MCS_INV_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP
|
|
#define IWX_RATE_HT_SISO_MCS_8_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP
|
|
#define IWX_RATE_HT_SISO_MCS_9_PLCP IWX_RATE_HT_SISO_MCS_INV_PLCP
|
|
|
|
/*
|
|
* These serve as indexes into struct iwx_rate iwx_rates[IWX_RIDX_MAX].
|
|
*/
|
|
enum {
|
|
IWX_RATE_1M_INDEX = 0,
|
|
IWX_FIRST_CCK_RATE = IWX_RATE_1M_INDEX,
|
|
IWX_RATE_2M_INDEX,
|
|
IWX_RATE_5M_INDEX,
|
|
IWX_RATE_11M_INDEX,
|
|
IWX_LAST_CCK_RATE = IWX_RATE_11M_INDEX,
|
|
IWX_RATE_6M_INDEX,
|
|
IWX_FIRST_OFDM_RATE = IWX_RATE_6M_INDEX,
|
|
IWX_RATE_MCS_0_INDEX = IWX_RATE_6M_INDEX,
|
|
IWX_FIRST_HT_RATE = IWX_RATE_MCS_0_INDEX,
|
|
IWX_FIRST_VHT_RATE = IWX_RATE_MCS_0_INDEX,
|
|
IWX_RATE_9M_INDEX,
|
|
IWX_RATE_12M_INDEX,
|
|
IWX_RATE_MCS_1_INDEX = IWX_RATE_12M_INDEX,
|
|
IWX_RATE_MCS_8_INDEX,
|
|
IWX_FIRST_HT_MIMO2_RATE = IWX_RATE_MCS_8_INDEX,
|
|
IWX_RATE_18M_INDEX,
|
|
IWX_RATE_MCS_2_INDEX = IWX_RATE_18M_INDEX,
|
|
IWX_RATE_24M_INDEX,
|
|
IWX_RATE_MCS_3_INDEX = IWX_RATE_24M_INDEX,
|
|
IWX_RATE_MCS_9_INDEX,
|
|
IWX_RATE_36M_INDEX,
|
|
IWX_RATE_MCS_4_INDEX = IWX_RATE_36M_INDEX,
|
|
IWX_RATE_MCS_10_INDEX,
|
|
IWX_RATE_48M_INDEX,
|
|
IWX_RATE_MCS_5_INDEX = IWX_RATE_48M_INDEX,
|
|
IWX_RATE_MCS_11_INDEX,
|
|
IWX_RATE_54M_INDEX,
|
|
IWX_RATE_MCS_6_INDEX = IWX_RATE_54M_INDEX,
|
|
IWX_LAST_NON_HT_RATE = IWX_RATE_54M_INDEX,
|
|
IWX_RATE_MCS_7_INDEX,
|
|
IWX_LAST_HT_SISO_RATE = IWX_RATE_MCS_7_INDEX,
|
|
IWX_RATE_MCS_12_INDEX,
|
|
IWX_RATE_MCS_13_INDEX,
|
|
IWX_RATE_MCS_14_INDEX,
|
|
IWX_RATE_MCS_15_INDEX,
|
|
IWX_LAST_HT_RATE = IWX_RATE_MCS_15_INDEX,
|
|
IWX_LAST_VHT_RATE = IWX_RATE_MCS_9_INDEX,
|
|
IWX_RATE_COUNT_LEGACY = IWX_LAST_NON_HT_RATE + 1,
|
|
IWX_RATE_COUNT = IWX_LAST_HT_RATE + 1,
|
|
};
|
|
|
|
#define IWX_RATE_BIT_MSK(r) (1 << (IWX_RATE_##r##M_INDEX))
|
|
|
|
/* fw API values for legacy bit rates, both OFDM and CCK */
|
|
#define IWX_RATE_6M_PLCP 13
|
|
#define IWX_RATE_9M_PLCP 15
|
|
#define IWX_RATE_12M_PLCP 5
|
|
#define IWX_RATE_18M_PLCP 7
|
|
#define IWX_RATE_24M_PLCP 9
|
|
#define IWX_RATE_36M_PLCP 11
|
|
#define IWX_RATE_48M_PLCP 1
|
|
#define IWX_RATE_54M_PLCP 3
|
|
#define IWX_RATE_1M_PLCP 10
|
|
#define IWX_RATE_2M_PLCP 20
|
|
#define IWX_RATE_5M_PLCP 55
|
|
#define IWX_RATE_11M_PLCP 110
|
|
#define IWX_RATE_INVM_PLCP 0xff
|
|
|
|
/*
|
|
* rate_n_flags bit fields version 1
|
|
*
|
|
* The 32-bit value has different layouts in the low 8 bites depending on the
|
|
* format. There are three formats, HT, VHT and legacy (11abg, with subformats
|
|
* for CCK and OFDM).
|
|
*
|
|
* High-throughput (HT) rate format
|
|
* bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
|
|
* Very High-throughput (VHT) rate format
|
|
* bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
|
|
* Legacy OFDM rate format for bits 7:0
|
|
* bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
|
|
* Legacy CCK rate format for bits 7:0:
|
|
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
|
|
*/
|
|
|
|
/* Bit 8: (1) HT format, (0) legacy or VHT format */
|
|
#define IWX_RATE_MCS_HT_POS 8
|
|
#define IWX_RATE_MCS_HT_MSK_V1 (1 << IWX_RATE_MCS_HT_POS)
|
|
|
|
/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
|
|
#define IWX_RATE_MCS_CCK_POS_V1 9
|
|
#define IWX_RATE_MCS_CCK_MSK_V1 (1 << IWX_RATE_MCS_CCK_POS_V1)
|
|
|
|
/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
|
|
#define IWX_RATE_MCS_VHT_POS_V1 26
|
|
#define IWX_RATE_MCS_VHT_MSK_V1 (1 << IWX_RATE_MCS_VHT_POS_V1)
|
|
|
|
|
|
/*
|
|
* High-throughput (HT) rate format for bits 7:0
|
|
*
|
|
* 2-0: MCS rate base
|
|
* 0) 6 Mbps
|
|
* 1) 12 Mbps
|
|
* 2) 18 Mbps
|
|
* 3) 24 Mbps
|
|
* 4) 36 Mbps
|
|
* 5) 48 Mbps
|
|
* 6) 54 Mbps
|
|
* 7) 60 Mbps
|
|
* 4-3: 0) Single stream (SISO)
|
|
* 1) Dual stream (MIMO)
|
|
* 2) Triple stream (MIMO)
|
|
* 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
|
|
* (bits 7-6 are zero)
|
|
*
|
|
* Together the low 5 bits work out to the MCS index because we don't
|
|
* support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
|
|
* streams and 16-23 have three streams. We could also support MCS 32
|
|
* which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
|
|
*/
|
|
#define IWX_RATE_HT_MCS_RATE_CODE_MSK_V1 0x7
|
|
#define IWX_RATE_HT_MCS_NSS_POS_V1 3
|
|
#define IWX_RATE_HT_MCS_NSS_MSK_V1 (3 << IWX_RATE_HT_MCS_NSS_POS_V1)
|
|
#define IWX_RATE_HT_MCS_MIMO2_MSK_V1 (1 << IWX_RATE_HT_MCS_NSS_POS_V1)
|
|
|
|
/* Bit 10: (1) Use Green Field preamble */
|
|
#define IWX_RATE_HT_MCS_GF_POS 10
|
|
#define IWX_RATE_HT_MCS_GF_MSK (1 << IWX_RATE_HT_MCS_GF_POS)
|
|
|
|
#define IWX_RATE_HT_MCS_INDEX_MSK_V1 0x3f
|
|
|
|
/*
|
|
* Very High-throughput (VHT) rate format for bits 7:0
|
|
*
|
|
* 3-0: VHT MCS (0-9)
|
|
* 5-4: number of streams - 1:
|
|
* 0) Single stream (SISO)
|
|
* 1) Dual stream (MIMO)
|
|
* 2) Triple stream (MIMO)
|
|
*/
|
|
|
|
/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
|
|
#define IWX_RATE_VHT_MCS_RATE_CODE_MSK 0xf
|
|
#define IWX_RATE_VHT_MCS_NSS_POS 4
|
|
#define IWX_RATE_VHT_MCS_NSS_MSK (3 << IWX_RATE_VHT_MCS_NSS_POS)
|
|
#define IWX_RATE_VHT_MCS_MIMO2_MSK (1 << IWX_RATE_VHT_MCS_NSS_POS)
|
|
|
|
/*
|
|
* Legacy OFDM rate format for bits 7:0
|
|
*
|
|
* 3-0: 0xD) 6 Mbps
|
|
* 0xF) 9 Mbps
|
|
* 0x5) 12 Mbps
|
|
* 0x7) 18 Mbps
|
|
* 0x9) 24 Mbps
|
|
* 0xB) 36 Mbps
|
|
* 0x1) 48 Mbps
|
|
* 0x3) 54 Mbps
|
|
* (bits 7-4 are 0)
|
|
*
|
|
* Legacy CCK rate format for bits 7:0:
|
|
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
|
|
*
|
|
* 6-0: 10) 1 Mbps
|
|
* 20) 2 Mbps
|
|
* 55) 5.5 Mbps
|
|
* 110) 11 Mbps
|
|
* (bit 7 is 0)
|
|
*/
|
|
#define IWX_RATE_LEGACY_RATE_MSK_V1 0xff
|
|
|
|
/* Bit 10 - OFDM HE */
|
|
#define IWX_RATE_MCS_HE_POS_V1 10
|
|
#define IWX_RATE_MCS_HE_MSK_V1 (1 << RATE_MCS_HE_POS_V1)
|
|
|
|
/*
|
|
* Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
|
|
* 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
|
|
*/
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_POS 11
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_MSK_V1 (3 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_20_V1 (0 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_40_V1 (1 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_80_V1 (2 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_160_V1 (3 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
|
|
/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
|
|
#define IWX_RATE_MCS_SGI_POS_V1 13
|
|
#define IWX_RATE_MCS_SGI_MSK_V1 (1 << IWX_RATE_MCS_SGI_POS_V1)
|
|
|
|
/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C (unused) */
|
|
#define IWX_RATE_MCS_ANT_POS 14
|
|
#define IWX_RATE_MCS_ANT_A_MSK (1 << IWX_RATE_MCS_ANT_POS)
|
|
#define IWX_RATE_MCS_ANT_B_MSK (2 << IWX_RATE_MCS_ANT_POS)
|
|
#define IWX_RATE_MCS_ANT_AB_MSK (IWX_RATE_MCS_ANT_A_MSK | \
|
|
IWX_RATE_MCS_ANT_B_MSK)
|
|
#define IWX_RATE_MCS_ANT_MSK IWX_RATE_MCS_ANT_ABC_MSK
|
|
#define IWX_RATE_MCS_ANT_NUM 2
|
|
|
|
/* Bit 17: (0) SS, (1) SS*2 */
|
|
#define IWX_RATE_MCS_STBC_POS 17
|
|
#define IWX_RATE_MCS_STBC_MSK (1 << IWX_RATE_MCS_STBC_POS)
|
|
|
|
/* Bit 18: OFDM-HE dual carrier mode */
|
|
#define IWX_RATE_HE_DUAL_CARRIER_MODE 18
|
|
#define IWX_RATE_HE_DUAL_CARRIER_MODE_MSK (1 << IWX_RATE_HE_DUAL_CARRIER_MODE)
|
|
|
|
/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
|
|
#define IWX_RATE_MCS_BF_POS 19
|
|
#define IWX_RATE_MCS_BF_MSK (1 << IWX_RATE_MCS_BF_POS)
|
|
|
|
/*
|
|
* Bit 20-21: HE LTF type and guard interval
|
|
* HE (ext) SU:
|
|
* 0 1xLTF+0.8us
|
|
* 1 2xLTF+0.8us
|
|
* 2 2xLTF+1.6us
|
|
* 3 & SGI (bit 13) clear 4xLTF+3.2us
|
|
* 3 & SGI (bit 13) set 4xLTF+0.8us
|
|
* HE MU:
|
|
* 0 4xLTF+0.8us
|
|
* 1 2xLTF+0.8us
|
|
* 2 2xLTF+1.6us
|
|
* 3 4xLTF+3.2us
|
|
* HE TRIG:
|
|
* 0 1xLTF+1.6us
|
|
* 1 2xLTF+1.6us
|
|
* 2 4xLTF+3.2us
|
|
* 3 (does not occur)
|
|
*/
|
|
#define IWX_RATE_MCS_HE_GI_LTF_POS 20
|
|
#define IWX_RATE_MCS_HE_GI_LTF_MSK_V1 (3 << IWX_RATE_MCS_HE_GI_LTF_POS)
|
|
|
|
/* Bit 22-23: HE type. (0) SU, (1) SU_EXT, (2) MU, (3) trigger based */
|
|
#define IWX_RATE_MCS_HE_TYPE_POS_V1 22
|
|
#define IWX_RATE_MCS_HE_TYPE_SU_V1 (0 << IWX_RATE_MCS_HE_TYPE_POS_V1)
|
|
#define IWX_RATE_MCS_HE_TYPE_EXT_SU_V1 (1 << IWX_RATE_MCS_HE_TYPE_POS_V1)
|
|
#define IWX_RATE_MCS_HE_TYPE_MU_V1 (2 << IWX_RATE_MCS_HE_TYPE_POS_V1)
|
|
#define IWX_RATE_MCS_HE_TYPE_TRIG_V1 (3 << IWX_RATE_MCS_HE_TYPE_POS_V1)
|
|
#define IWX_RATE_MCS_HE_TYPE_MSK_V1 (3 << IWX_RATE_MCS_HE_TYPE_POS_V1)
|
|
|
|
/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
|
|
#define IWX_RATE_MCS_DUP_POS_V1 24
|
|
#define IWX_RATE_MCS_DUP_MSK_V1 (3 << IWX_RATE_MCS_DUP_POS_V1)
|
|
|
|
/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
|
|
#define IWX_RATE_MCS_LDPC_POS_V1 27
|
|
#define IWX_RATE_MCS_LDPC_MSK_V1 (1 << IWX_RATE_MCS_LDPC_POS_V1)
|
|
|
|
/* Bit 28: (1) 106-tone RX (8 MHz RU), (0) normal bandwidth */
|
|
#define IWX_RATE_MCS_HE_106T_POS_V1 28
|
|
#define IWX_RATE_MCS_HE_106T_MSK_V1 (1 << IWX_RATE_MCS_HE_106T_POS_V1)
|
|
|
|
/* Bit 30-31: (1) RTS, (2) CTS */
|
|
#define IWX_RATE_MCS_RTS_REQUIRED_POS (30)
|
|
#define IWX_RATE_MCS_RTS_REQUIRED_MSK (1 << IWX_RATE_MCS_RTS_REQUIRED_POS)
|
|
#define IWX_RATE_MCS_CTS_REQUIRED_POS (31)
|
|
#define IWX_RATE_MCS_CTS_REQUIRED_MSK (1 << IWX_RATE_MCS_CTS_REQUIRED_POS)
|
|
|
|
|
|
/* rate_n_flags bit field version 2
|
|
*
|
|
* The 32-bit value has different layouts in the low 8 bits depending on the
|
|
* format. There are three formats, HT, VHT and legacy (11abg, with subformats
|
|
* for CCK and OFDM).
|
|
*
|
|
*/
|
|
|
|
/* Bits 10-8: rate format
|
|
* (0) Legacy CCK (1) Legacy OFDM (2) High-throughput (HT)
|
|
* (3) Very High-throughput (VHT) (4) High-efficiency (HE)
|
|
* (5) Extremely High-throughput (EHT)
|
|
*/
|
|
#define IWX_RATE_MCS_MOD_TYPE_POS 8
|
|
#define IWX_RATE_MCS_MOD_TYPE_MSK (0x7 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_CCK_MSK (0 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_LEGACY_OFDM_MSK (1 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_HT_MSK (2 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_VHT_MSK (3 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_HE_MSK (4 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
#define IWX_RATE_MCS_EHT_MSK (5 << IWX_RATE_MCS_MOD_TYPE_POS)
|
|
|
|
/*
|
|
* Legacy CCK rate format for bits 0:3:
|
|
*
|
|
* (0) 0xa - 1 Mbps
|
|
* (1) 0x14 - 2 Mbps
|
|
* (2) 0x37 - 5.5 Mbps
|
|
* (3) 0x6e - 11 nbps
|
|
*
|
|
* Legacy OFDM rate format for bits 0:3:
|
|
*
|
|
* (0) 6 Mbps
|
|
* (1) 9 Mbps
|
|
* (2) 12 Mbps
|
|
* (3) 18 Mbps
|
|
* (4) 24 Mbps
|
|
* (5) 36 Mbps
|
|
* (6) 48 Mbps
|
|
* (7) 54 Mbps
|
|
*
|
|
*/
|
|
#define IWX_RATE_LEGACY_RATE_MSK 0x7
|
|
|
|
/*
|
|
* HT, VHT, HE, EHT rate format for bits 3:0
|
|
* 3-0: MCS
|
|
*
|
|
*/
|
|
#define IWX_RATE_HT_MCS_CODE_MSK 0x7
|
|
#define IWX_RATE_MCS_NSS_POS 4
|
|
#define IWX_RATE_MCS_NSS_MSK (1 << IWX_RATE_MCS_NSS_POS)
|
|
#define IWX_RATE_MCS_CODE_MSK 0xf
|
|
#define IWX_RATE_HT_MCS_INDEX(r) ((((r) & IWX_RATE_MCS_NSS_MSK) >> 1) | \
|
|
((r) & IWX_RATE_HT_MCS_CODE_MSK))
|
|
|
|
/* Bits 7-5: reserved */
|
|
|
|
/*
|
|
* Bits 13-11: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz, (4) 320MHz
|
|
*/
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_MSK (0x7 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_20 (0 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_40 (1 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_80 (2 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_160 (3 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
#define IWX_RATE_MCS_CHAN_WIDTH_320 (4 << IWX_RATE_MCS_CHAN_WIDTH_POS)
|
|
|
|
/* Bit 15-14: Antenna selection:
|
|
* Bit 14: Ant A active
|
|
* Bit 15: Ant B active
|
|
*
|
|
* All relevant definitions are same as in v1
|
|
*/
|
|
|
|
/* Bit 16 (1) LDPC enables, (0) LDPC disabled */
|
|
#define IWX_RATE_MCS_LDPC_POS 16
|
|
#define IWX_RATE_MCS_LDPC_MSK (1 << IWX_RATE_MCS_LDPC_POS)
|
|
|
|
/* Bit 17: (0) SS, (1) SS*2 (same as v1) */
|
|
|
|
/* Bit 18: OFDM-HE dual carrier mode (same as v1) */
|
|
|
|
/* Bit 19: (0) Beamforming is off, (1) Beamforming is on (same as v1) */
|
|
|
|
/*
|
|
* Bit 22-20: HE LTF type and guard interval
|
|
* CCK:
|
|
* 0 long preamble
|
|
* 1 short preamble
|
|
* HT/VHT:
|
|
* 0 0.8us
|
|
* 1 0.4us
|
|
* HE (ext) SU:
|
|
* 0 1xLTF+0.8us
|
|
* 1 2xLTF+0.8us
|
|
* 2 2xLTF+1.6us
|
|
* 3 4xLTF+3.2us
|
|
* 4 4xLTF+0.8us
|
|
* HE MU:
|
|
* 0 4xLTF+0.8us
|
|
* 1 2xLTF+0.8us
|
|
* 2 2xLTF+1.6us
|
|
* 3 4xLTF+3.2us
|
|
* HE TRIG:
|
|
* 0 1xLTF+1.6us
|
|
* 1 2xLTF+1.6us
|
|
* 2 4xLTF+3.2us
|
|
* */
|
|
#define IWX_RATE_MCS_HE_GI_LTF_MSK (0x7 << IWX_RATE_MCS_HE_GI_LTF_POS)
|
|
#define IWX_RATE_MCS_SGI_POS IWX_RATE_MCS_HE_GI_LTF_POS
|
|
#define IWX_RATE_MCS_SGI_MSK (1 << IWX_RATE_MCS_SGI_POS)
|
|
#define IWX_RATE_MCS_HE_SU_4_LTF 3
|
|
#define IWX_RATE_MCS_HE_SU_4_LTF_08_GI 4
|
|
|
|
/* Bit 24-23: HE type. (0) SU, (1) SU_EXT, (2) MU, (3) trigger based */
|
|
#define IWX_RATE_MCS_HE_TYPE_POS 23
|
|
#define IWX_RATE_MCS_HE_TYPE_SU (0 << IWX_RATE_MCS_HE_TYPE_POS)
|
|
#define IWX_RATE_MCS_HE_TYPE_EXT_SU (1 << IWX_RATE_MCS_HE_TYPE_POS)
|
|
#define IWX_RATE_MCS_HE_TYPE_MU (2 << IWX_RATE_MCS_HE_TYPE_POS)
|
|
#define IWX_RATE_MCS_HE_TYPE_TRIG (3 << IWX_RATE_MCS_HE_TYPE_POS)
|
|
#define IWX_RATE_MCS_HE_TYPE_MSK (3 << IWX_RATE_MCS_HE_TYPE_POS)
|
|
|
|
/* Bit 25: duplicate channel enabled
|
|
*
|
|
* if this bit is set, duplicate is according to BW (bits 11-13):
|
|
*
|
|
* CCK: 2x 20MHz
|
|
* OFDM Legacy: N x 20Mhz, (N = BW \ 2 , either 2, 4, 8, 16)
|
|
* EHT: 2 x BW/2, (80 - 2x40, 160 - 2x80, 320 - 2x160)
|
|
* */
|
|
#define IWX_RATE_MCS_DUP_POS 25
|
|
#define IWX_RATE_MCS_DUP_MSK (1 << IWX_RATE_MCS_DUP_POS)
|
|
|
|
/* Bit 26: (1) 106-tone RX (8 MHz RU), (0) normal bandwidth */
|
|
#define IWX_RATE_MCS_HE_106T_POS 26
|
|
#define IWX_RATE_MCS_HE_106T_MSK (1 << IWX_RATE_MCS_HE_106T_POS)
|
|
|
|
/* Bit 27: EHT extra LTF:
|
|
* instead of 1 LTF for SISO use 2 LTFs,
|
|
* instead of 2 LTFs for NSTS=2 use 4 LTFs*/
|
|
#define IWX_RATE_MCS_EHT_EXTRA_LTF_POS 27
|
|
#define IWX_RATE_MCS_EHT_EXTRA_LTF_MSK (1 << IWX_RATE_MCS_EHT_EXTRA_LTF_POS)
|
|
|
|
/* Bit 31-28: reserved */
|
|
|
|
|
|
/* Link Quality definitions */
|
|
|
|
/* # entries in rate scale table to support Tx retries */
|
|
#define IWX_LQ_MAX_RETRY_NUM 16
|
|
|
|
/* Link quality command flags bit fields */
|
|
|
|
/* Bit 0: (0) Don't use RTS (1) Use RTS */
|
|
#define IWX_LQ_FLAG_USE_RTS_POS 0
|
|
#define IWX_LQ_FLAG_USE_RTS_MSK (1 << IWX_LQ_FLAG_USE_RTS_POS)
|
|
|
|
/* Bit 1-3: LQ command color. Used to match responses to LQ commands */
|
|
#define IWX_LQ_FLAG_COLOR_POS 1
|
|
#define IWX_LQ_FLAG_COLOR_MSK (7 << IWX_LQ_FLAG_COLOR_POS)
|
|
|
|
/* Bit 4-5: Tx RTS BW Signalling
|
|
* (0) No RTS BW signalling
|
|
* (1) Static BW signalling
|
|
* (2) Dynamic BW signalling
|
|
*/
|
|
#define IWX_LQ_FLAG_RTS_BW_SIG_POS 4
|
|
#define IWX_LQ_FLAG_RTS_BW_SIG_NONE (0 << IWX_LQ_FLAG_RTS_BW_SIG_POS)
|
|
#define IWX_LQ_FLAG_RTS_BW_SIG_STATIC (1 << IWX_LQ_FLAG_RTS_BW_SIG_POS)
|
|
#define IWX_LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << IWX_LQ_FLAG_RTS_BW_SIG_POS)
|
|
|
|
/* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection
|
|
* Dynamic BW selection allows Tx with narrower BW then requested in rates
|
|
*/
|
|
#define IWX_LQ_FLAG_DYNAMIC_BW_POS 6
|
|
#define IWX_LQ_FLAG_DYNAMIC_BW_MSK (1 << IWX_LQ_FLAG_DYNAMIC_BW_POS)
|
|
|
|
#define IWX_RLC_CHAIN_INFO_DRIVER_FORCE (1 << 0)
|
|
#define IWL_RLC_CHAIN_INFO_VALID 0x000e
|
|
#define IWL_RLC_CHAIN_INFO_FORCE 0x0070
|
|
#define IWL_RLC_CHAIN_INFO_FORCE_MIMO 0x0380
|
|
#define IWL_RLC_CHAIN_INFO_COUNT 0x0c00
|
|
#define IWL_RLC_CHAIN_INFO_MIMO_COUNT 0x3000
|
|
|
|
/**
|
|
* struct iwx_rlc_properties - RLC properties
|
|
* @rx_chain_info: RX chain info, IWX_RLC_CHAIN_INFO_*
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_rlc_properties {
|
|
uint32_t rx_chain_info;
|
|
uint32_t reserved;
|
|
} __packed; /* RLC_PROPERTIES_S_VER_1 */
|
|
|
|
#define IWX_SAD_MODE_ENABLED (1 << 0)
|
|
#define IWX_SAD_MODE_DEFAULT_ANT_MSK 0x6
|
|
#define IWX_SAD_MODE_DEFAULT_ANT_FW 0x0
|
|
#define IWX_SAD_MODE_DEFAULT_ANT_A 0x2
|
|
#define IWX_SAD_MODE_DEFAULT_ANT_B 0x4
|
|
|
|
/**
|
|
* struct iwx_sad_properties - SAD properties
|
|
* @chain_a_sad_mode: chain A SAD mode, IWX_SAD_MODE_*
|
|
* @chain_b_sad_mode: chain B SAD mode, IWX_SAD_MODE_*
|
|
* @mac_id: MAC index
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_sad_properties {
|
|
uint32_t chain_a_sad_mode;
|
|
uint32_t chain_b_sad_mode;
|
|
uint32_t mac_id;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_rlc_config_cmd - RLC configuration
|
|
* @phy_id: PHY index
|
|
* @rlc: RLC properties, &struct iwx_rlc_properties
|
|
* @sad: SAD (single antenna diversity) options, &struct iwx_sad_properties
|
|
* @flags: flags, IWX_RLC_FLAGS_*
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_rlc_config_cmd {
|
|
uint32_t phy_id;
|
|
struct iwx_rlc_properties rlc;
|
|
struct iwx_sad_properties sad;
|
|
uint8_t flags;
|
|
uint8_t reserved[3];
|
|
} __packed; /* RLC_CONFIG_CMD_API_S_VER_2 */
|
|
|
|
#define IWX_MAX_BAID_OLD 16 /* MAX_IMMEDIATE_BA_API_D_VER_2 */
|
|
#define IWX_MAX_BAID 32 /* MAX_IMMEDIATE_BA_API_D_VER_3 */
|
|
|
|
/**
|
|
* BAID allocation/config action
|
|
* @IWX_RX_BAID_ACTION_ADD: add a new BAID session
|
|
* @IWX_RX_BAID_ACTION_MODIFY: modify the BAID session
|
|
* @IWX_RX_BAID_ACTION_REMOVE: remove the BAID session
|
|
*/
|
|
#define IWX_RX_BAID_ACTION_ADD 0
|
|
#define IWX_RX_BAID_ACTION_MODIFY 1
|
|
#define IWX_RX_BAID_ACTION_REMOVE 2
|
|
/* RX_BAID_ALLOCATION_ACTION_E_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_cmd_alloc - BAID allocation data
|
|
* @sta_id_mask: station ID mask
|
|
* @tid: the TID for this session
|
|
* @reserved: reserved
|
|
* @ssn: the starting sequence number
|
|
* @win_size: RX BA session window size
|
|
*/
|
|
struct iwx_rx_baid_cfg_cmd_alloc {
|
|
uint32_t sta_id_mask;
|
|
uint8_t tid;
|
|
uint8_t reserved[3];
|
|
uint16_t ssn;
|
|
uint16_t win_size;
|
|
} __packed; /* RX_BAID_ALLOCATION_ADD_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_cmd_modify - BAID modification data
|
|
* @old_sta_id_mask: old station ID mask
|
|
* @new_sta_id_mask: new station ID mask
|
|
* @tid: TID of the BAID
|
|
*/
|
|
struct iwx_rx_baid_cfg_cmd_modify {
|
|
uint32_t old_sta_id_mask;
|
|
uint32_t new_sta_id_mask;
|
|
uint32_t tid;
|
|
} __packed; /* RX_BAID_ALLOCATION_MODIFY_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_cmd_remove_v1 - BAID removal data
|
|
* @baid: the BAID to remove
|
|
*/
|
|
struct iwx_rx_baid_cfg_cmd_remove_v1 {
|
|
uint32_t baid;
|
|
} __packed; /* RX_BAID_ALLOCATION_REMOVE_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_cmd_remove - BAID removal data
|
|
* @sta_id_mask: the station mask of the BAID to remove
|
|
* @tid: the TID of the BAID to remove
|
|
*/
|
|
struct iwx_rx_baid_cfg_cmd_remove {
|
|
uint32_t sta_id_mask;
|
|
uint32_t tid;
|
|
} __packed; /* RX_BAID_ALLOCATION_REMOVE_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_cmd - BAID allocation/config command
|
|
* @action: the action, from &enum iwx_rx_baid_action
|
|
*/
|
|
struct iwx_rx_baid_cfg_cmd {
|
|
uint32_t action;
|
|
union {
|
|
struct iwx_rx_baid_cfg_cmd_alloc alloc;
|
|
struct iwx_rx_baid_cfg_cmd_modify modify;
|
|
struct iwx_rx_baid_cfg_cmd_remove_v1 remove_v1;
|
|
struct iwx_rx_baid_cfg_cmd_remove remove;
|
|
}; /* RX_BAID_ALLOCATION_OPERATION_API_U_VER_2 */
|
|
} __packed; /* RX_BAID_ALLOCATION_CONFIG_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_rx_baid_cfg_resp - BAID allocation response
|
|
* @baid: the allocated BAID
|
|
*/
|
|
struct iwx_rx_baid_cfg_resp {
|
|
uint32_t baid;
|
|
}; /* RX_BAID_ALLOCATION_RESPONSE_API_S_VER_1 */
|
|
|
|
/**
|
|
* scheduler queue operation
|
|
* @IWX_SCD_QUEUE_ADD: allocate a new queue
|
|
* @IWX_SCD_QUEUE_REMOVE: remove a queue
|
|
* @IWX_SCD_QUEUE_MODIFY: modify a queue
|
|
*/
|
|
#define IWX_SCD_QUEUE_ADD 0
|
|
#define IWX_SCD_QUEUE_REMOVE 1
|
|
#define IWX_SCD_QUEUE_MODIFY 2
|
|
|
|
/**
|
|
* struct iwx_scd_queue_cfg_cmd - scheduler queue allocation command
|
|
* @operation: the operation, see &enum iwl_scd_queue_cfg_operation
|
|
* @u.add.sta_mask: station mask
|
|
* @u.add.tid: TID
|
|
* @u.add.reserved: reserved
|
|
* @u.add.flags: flags from &enum iwl_tx_queue_cfg_actions, except
|
|
* %TX_QUEUE_CFG_ENABLE_QUEUE is not valid
|
|
* @u.add.cb_size: size code
|
|
* @u.add.bc_dram_addr: byte-count table IOVA
|
|
* @u.add.tfdq_dram_addr: TFD queue IOVA
|
|
* @u.remove.sta_mask: station mask of queue to remove
|
|
* @u.remove.tid: TID of queue to remove
|
|
* @u.modify.old_sta_mask: old station mask for modify
|
|
* @u.modify.tid: TID of queue to modify
|
|
* @u.modify.new_sta_mask: new station mask for modify
|
|
*/
|
|
struct iwx_scd_queue_cfg_cmd {
|
|
uint32_t operation;
|
|
union {
|
|
struct {
|
|
uint32_t sta_mask;
|
|
uint8_t tid;
|
|
uint8_t reserved[3];
|
|
uint32_t flags;
|
|
uint32_t cb_size;
|
|
uint64_t bc_dram_addr;
|
|
uint64_t tfdq_dram_addr;
|
|
} __packed add; /* TX_QUEUE_CFG_CMD_ADD_API_S_VER_1 */
|
|
struct {
|
|
uint32_t sta_mask;
|
|
uint32_t tid;
|
|
} __packed remove; /* TX_QUEUE_CFG_CMD_REMOVE_API_S_VER_1 */
|
|
struct {
|
|
uint32_t old_sta_mask;
|
|
uint32_t tid;
|
|
uint32_t new_sta_mask;
|
|
} __packed modify; /* TX_QUEUE_CFG_CMD_MODIFY_API_S_VER_1 */
|
|
} __packed u; /* TX_QUEUE_CFG_CMD_OPERATION_API_U_VER_1 */
|
|
} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_3 */
|
|
|
|
/**
|
|
* Options for TLC config flags
|
|
* @IWX_TLC_MNG_CFG_FLAGS_STBC_MSK: enable STBC. For HE this enables STBC for
|
|
* bandwidths <= 80MHz
|
|
* @IWX_TLC_MNG_CFG_FLAGS_LDPC_MSK: enable LDPC
|
|
* @IWX_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK: enable STBC in HE at 160MHz
|
|
* bandwidth
|
|
* @IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK: enable HE Dual Carrier Modulation
|
|
* for BPSK (MCS 0) with 1 spatial
|
|
* stream
|
|
* @IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK: enable HE Dual Carrier Modulation
|
|
* for BPSK (MCS 0) with 2 spatial
|
|
* streams
|
|
*/
|
|
#define IWX_TLC_MNG_CFG_FLAGS_STBC_MSK (1 << 0)
|
|
#define IWX_TLC_MNG_CFG_FLAGS_LDPC_MSK (1 << 1)
|
|
#define IWX_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK (1 << 2)
|
|
#define IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK (1 << 3)
|
|
#define IWX_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK (1 << 4)
|
|
|
|
/**
|
|
* enum iwx_tlc_mng_cfg_cw - channel width options
|
|
* @IWX_TLC_MNG_CH_WIDTH_20MHZ: 20MHZ channel
|
|
* @IWX_TLC_MNG_CH_WIDTH_40MHZ: 40MHZ channel
|
|
* @IWX_TLC_MNG_CH_WIDTH_80MHZ: 80MHZ channel
|
|
* @IWX_TLC_MNG_CH_WIDTH_160MHZ: 160MHZ channel
|
|
* @IWX_TLC_MNG_CH_WIDTH_320MHZ: 320MHZ channel
|
|
*/
|
|
enum iwx_tlc_mng_cfg_cw {
|
|
IWX_TLC_MNG_CH_WIDTH_20MHZ,
|
|
IWX_TLC_MNG_CH_WIDTH_40MHZ,
|
|
IWX_TLC_MNG_CH_WIDTH_80MHZ,
|
|
IWX_TLC_MNG_CH_WIDTH_160MHZ,
|
|
IWX_TLC_MNG_CH_WIDTH_320MHZ,
|
|
};
|
|
|
|
/**
|
|
* @IWX_TLC_MNG_CHAIN_A_MSK: chain A
|
|
* @IWX_TLC_MNG_CHAIN_B_MSK: chain B
|
|
*/
|
|
#define IWX_TLC_MNG_CHAIN_A_MSK (1 << 0)
|
|
#define IWX_TLC_MNG_CHAIN_B_MSK (1 << 1)
|
|
|
|
/**
|
|
* enum iwx_tlc_mng_cfg_mode - supported modes
|
|
* @IWX_TLC_MNG_MODE_CCK: enable CCK
|
|
* @IWX_TLC_MNG_MODE_OFDM_NON_HT: enable OFDM (non HT)
|
|
* @IWX_TLC_MNG_MODE_NON_HT: enable non HT
|
|
* @IWX_TLC_MNG_MODE_HT: enable HT
|
|
* @IWX_TLC_MNG_MODE_VHT: enable VHT
|
|
* @IWX_TLC_MNG_MODE_HE: enable HE
|
|
* @IWX_TLC_MNG_MODE_EHT: enable EHT
|
|
*/
|
|
enum iwx_tlc_mng_cfg_mode {
|
|
IWX_TLC_MNG_MODE_CCK = 0,
|
|
IWX_TLC_MNG_MODE_OFDM_NON_HT = IWX_TLC_MNG_MODE_CCK,
|
|
IWX_TLC_MNG_MODE_NON_HT = IWX_TLC_MNG_MODE_CCK,
|
|
IWX_TLC_MNG_MODE_HT,
|
|
IWX_TLC_MNG_MODE_VHT,
|
|
IWX_TLC_MNG_MODE_HE,
|
|
IWX_TLC_MNG_MODE_EHT,
|
|
};
|
|
|
|
/**
|
|
* @IWX_TLC_MNG_HT_RATE_MCS0: index of MCS0
|
|
* @IWX_TLC_MNG_HT_RATE_MCS1: index of MCS1
|
|
* @IWX_TLC_MNG_HT_RATE_MCS2: index of MCS2
|
|
* @IWX_TLC_MNG_HT_RATE_MCS3: index of MCS3
|
|
* @IWX_TLC_MNG_HT_RATE_MCS4: index of MCS4
|
|
* @IWX_TLC_MNG_HT_RATE_MCS5: index of MCS5
|
|
* @IWX_TLC_MNG_HT_RATE_MCS6: index of MCS6
|
|
* @IWX_TLC_MNG_HT_RATE_MCS7: index of MCS7
|
|
* @IWX_TLC_MNG_HT_RATE_MCS8: index of MCS8
|
|
* @IWX_TLC_MNG_HT_RATE_MCS9: index of MCS9
|
|
* @IWX_TLC_MNG_HT_RATE_MCS10: index of MCS10
|
|
* @IWX_TLC_MNG_HT_RATE_MCS11: index of MCS11
|
|
* @IWX_TLC_MNG_HT_RATE_MAX: maximal rate for HT/VHT
|
|
*/
|
|
enum iwx_tlc_mng_ht_rates {
|
|
IWX_TLC_MNG_HT_RATE_MCS0 = 0,
|
|
IWX_TLC_MNG_HT_RATE_MCS1,
|
|
IWX_TLC_MNG_HT_RATE_MCS2,
|
|
IWX_TLC_MNG_HT_RATE_MCS3,
|
|
IWX_TLC_MNG_HT_RATE_MCS4,
|
|
IWX_TLC_MNG_HT_RATE_MCS5,
|
|
IWX_TLC_MNG_HT_RATE_MCS6,
|
|
IWX_TLC_MNG_HT_RATE_MCS7,
|
|
IWX_TLC_MNG_HT_RATE_MCS8,
|
|
IWX_TLC_MNG_HT_RATE_MCS9,
|
|
IWX_TLC_MNG_HT_RATE_MCS10,
|
|
IWX_TLC_MNG_HT_RATE_MCS11,
|
|
IWX_TLC_MNG_HT_RATE_MAX = IWX_TLC_MNG_HT_RATE_MCS11,
|
|
};
|
|
|
|
#define IWX_TLC_NSS_1 0
|
|
#define IWX_TLC_NSS_2 1
|
|
#define IWX_TLC_NSS_MAX 2
|
|
|
|
|
|
/**
|
|
* IWX_TLC_MCS_PER_BW - mcs index per BW
|
|
* @IWX_TLC_MCS_PER_BW_80: mcs for bw - 20Hhz, 40Hhz, 80Hhz
|
|
* @IWX_TLC_MCS_PER_BW_160: mcs for bw - 160Mhz
|
|
* @IWX_TLC_MCS_PER_BW_320: mcs for bw - 320Mhz
|
|
* @IWX_TLC_MCS_PER_BW_NUM_V3: number of entries up to version 3
|
|
* @IWX_TLC_MCS_PER_BW_NUM_V4: number of entries from version 4
|
|
*/
|
|
#define IWX_TLC_MCS_PER_BW_80 0
|
|
#define IWX_TLC_MCS_PER_BW_160 1
|
|
#define IWX_TLC_MCS_PER_BW_320 2
|
|
#define IWX_TLC_MCS_PER_BW_NUM_V3 (IWX_TLC_MCS_PER_BW_160 + 1)
|
|
#define IWX_TLC_MCS_PER_BW_NUM_V4 (IWX_TLC_MCS_PER_BW_320 + 1)
|
|
|
|
/**
|
|
* struct iwx_tlc_config_cmd_v3 - TLC configuration version 3
|
|
* @sta_id: station id
|
|
* @reserved1: reserved
|
|
* @max_ch_width: max supported channel width from @enum iwx_tlc_mng_cfg_cw
|
|
* @mode: &enum iwx_tlc_mng_cfg_mode
|
|
* @chains: bitmask of IWX_TLC_MNG_CHAIN_*_MSK
|
|
* @amsdu: 1 = TX amsdu is supported, 0 = not supported
|
|
* @flags: bitmask of IWX_TLC_MNG_CFG_*
|
|
* @non_ht_rates: bitmap of supported legacy rates
|
|
* @ht_rates: MCS index 0 - 11, per <nss, channel-width>
|
|
* pair (0 - 80mhz width and below, 1 - 160mhz).
|
|
* @max_mpdu_len: max MPDU length, in bytes
|
|
* @sgi_ch_width_supp: bitmap of SGI support per channel width
|
|
* use (1 << IWX_TLC_MNG_CFG_CW_*)
|
|
* @reserved2: reserved
|
|
* @max_tx_op: max TXOP in uSecs for all AC (BK, BE, VO, VI),
|
|
* set zero for no limit.
|
|
*/
|
|
struct iwx_tlc_config_cmd_v3 {
|
|
uint8_t sta_id;
|
|
uint8_t reserved1[3];
|
|
uint8_t max_ch_width;
|
|
uint8_t mode;
|
|
uint8_t chains;
|
|
uint8_t amsdu;
|
|
uint16_t flags;
|
|
uint16_t non_ht_rates;
|
|
uint16_t ht_rates[IWX_TLC_NSS_MAX][IWX_TLC_MCS_PER_BW_NUM_V3];
|
|
uint16_t max_mpdu_len;
|
|
uint8_t sgi_ch_width_supp;
|
|
uint8_t reserved2;
|
|
uint32_t max_tx_op;
|
|
} __packed; /* TLC_MNG_CONFIG_CMD_API_S_VER_3 */
|
|
|
|
/**
|
|
* struct iwx_tlc_config_cmd_v4 - TLC configuration
|
|
* @sta_id: station id
|
|
* @reserved1: reserved
|
|
* @max_ch_width: max supported channel width from @enum iwx_tlc_mng_cfg_cw
|
|
* @mode: &enum iwx_tlc_mng_cfg_mode
|
|
* @chains: bitmask of IWX_TLC_MNG_CHAIN_*_MSK
|
|
* @sgi_ch_width_supp: bitmap of SGI support per channel width
|
|
* use (1 << IWX_TLC_MNG_CFG_CW_*)
|
|
* @flags: bitmask of IWX_TLC_MNG_CFG_*
|
|
* @non_ht_rates: bitmap of supported legacy rates
|
|
* @ht_rates: MCS index 0 - 11, per <nss, channel-width>
|
|
* pair (0 - 80mhz width and below, 1 - 160mhz, 2 - 320mhz).
|
|
* @max_mpdu_len: max MPDU length, in bytes
|
|
* @max_tx_op: max TXOP in uSecs for all AC (BK, BE, VO, VI),
|
|
* set zero for no limit.
|
|
*/
|
|
struct iwx_tlc_config_cmd_v4 {
|
|
uint8_t sta_id;
|
|
uint8_t reserved1[3];
|
|
uint8_t max_ch_width;
|
|
uint8_t mode;
|
|
uint8_t chains;
|
|
uint8_t sgi_ch_width_supp;
|
|
uint16_t flags;
|
|
uint16_t non_ht_rates;
|
|
uint16_t ht_rates[IWX_TLC_NSS_MAX][IWX_TLC_MCS_PER_BW_NUM_V4];
|
|
uint16_t max_mpdu_len;
|
|
uint16_t max_tx_op;
|
|
} __packed; /* TLC_MNG_CONFIG_CMD_API_S_VER_4 */
|
|
|
|
/**
|
|
* @IWX_TLC_NOTIF_FLAG_RATE: last initial rate update
|
|
* @IWX_TLC_NOTIF_FLAG_AMSDU: umsdu parameters update
|
|
*/
|
|
#define IWX_TLC_NOTIF_FLAG_RATE (1 << 0)
|
|
#define IWX_TLC_NOTIF_FLAG_AMSDU (1 << 1)
|
|
|
|
/**
|
|
* struct iwx_tlc_update_notif - TLC notification from FW
|
|
* @sta_id: station id
|
|
* @reserved: reserved
|
|
* @flags: bitmap of notifications reported
|
|
* @rate: current initial rate; using rate_n_flags version 1 if notification
|
|
* version is < 3 at run-time, else rate_n_flags version 2
|
|
* @amsdu_size: Max AMSDU size, in bytes
|
|
* @amsdu_enabled: bitmap for per-TID AMSDU enablement
|
|
*/
|
|
struct iwx_tlc_update_notif {
|
|
uint8_t sta_id;
|
|
uint8_t reserved[3];
|
|
uint32_t flags;
|
|
uint32_t rate;
|
|
uint32_t amsdu_size;
|
|
uint32_t amsdu_enabled;
|
|
} __packed; /* TLC_MNG_UPDATE_NTFY_API_S_VER_2 */
|
|
|
|
/* Antenna flags. */
|
|
#define IWX_ANT_A (1 << 0)
|
|
#define IWX_ANT_B (1 << 1)
|
|
#define IWX_ANT_C (1 << 2)
|
|
/* Shortcuts. */
|
|
#define IWX_ANT_AB (IWX_ANT_A | IWX_ANT_B)
|
|
#define IWX_ANT_BC (IWX_ANT_B | IWX_ANT_C)
|
|
#define IWX_ANT_ABC (IWX_ANT_A | IWX_ANT_B | IWX_ANT_C)
|
|
|
|
/*
|
|
* TX command security control
|
|
*/
|
|
#define IWX_TX_CMD_SEC_WEP 0x01
|
|
#define IWX_TX_CMD_SEC_CCM 0x02
|
|
#define IWX_TX_CMD_SEC_TKIP 0x03
|
|
#define IWX_TX_CMD_SEC_EXT 0x04
|
|
#define IWX_TX_CMD_SEC_MSK 0x07
|
|
#define IWX_TX_CMD_SEC_WEP_KEY_IDX_POS 6
|
|
#define IWX_TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0
|
|
#define IWX_TX_CMD_SEC_KEY128 0x08
|
|
|
|
/* TODO: how does these values are OK with only 16 bit variable??? */
|
|
/*
|
|
* TX command next frame info
|
|
*
|
|
* bits 0:2 - security control (IWX_TX_CMD_SEC_*)
|
|
* bit 3 - immediate ACK required
|
|
* bit 4 - rate is taken from STA table
|
|
* bit 5 - frame belongs to BA stream
|
|
* bit 6 - immediate BA response expected
|
|
* bit 7 - unused
|
|
* bits 8:15 - Station ID
|
|
* bits 16:31 - rate
|
|
*/
|
|
#define IWX_TX_CMD_NEXT_FRAME_ACK_MSK (0x8)
|
|
#define IWX_TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10)
|
|
#define IWX_TX_CMD_NEXT_FRAME_BA_MSK (0x20)
|
|
#define IWX_TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40)
|
|
#define IWX_TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8)
|
|
#define IWX_TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00)
|
|
#define IWX_TX_CMD_NEXT_FRAME_STA_ID_POS (8)
|
|
#define IWX_TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000)
|
|
#define IWX_TX_CMD_NEXT_FRAME_RATE_POS (16)
|
|
|
|
/*
|
|
* TX command Frame life time in us - to be written in pm_frame_timeout
|
|
*/
|
|
#define IWX_TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF
|
|
#define IWX_TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/
|
|
#define IWX_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */
|
|
#define IWX_TX_CMD_LIFE_TIME_EXPIRED_FRAME 0
|
|
|
|
/*
|
|
* TID for non QoS frames - to be written in tid_tspec
|
|
*/
|
|
#define IWX_TID_NON_QOS 0
|
|
|
|
/*
|
|
* Limits on the retransmissions - to be written in {data,rts}_retry_limit
|
|
*/
|
|
#define IWX_DEFAULT_TX_RETRY 15
|
|
#define IWX_MGMT_DFAULT_RETRY_LIMIT 3
|
|
#define IWX_RTS_DFAULT_RETRY_LIMIT 3
|
|
#define IWX_BAR_DFAULT_RETRY_LIMIT 60
|
|
#define IWX_LOW_RETRY_LIMIT 7
|
|
|
|
/*
|
|
* The FH will write back to the first TB only, so we need to copy some data
|
|
* into the buffer regardless of whether it should be mapped or not.
|
|
* This indicates how big the first TB must be to include the scratch buffer
|
|
* and the assigned PN.
|
|
* Since PN location is 8 bytes at offset 12, it's 20 now.
|
|
* If we make it bigger then allocations will be bigger and copy slower, so
|
|
* that's probably not useful.
|
|
*/
|
|
#define IWX_FIRST_TB_SIZE 20
|
|
#define IWX_FIRST_TB_SIZE_ALIGN ((IWX_FIRST_TB_SIZE + (64 - 1)) & ~(64 - 1))
|
|
|
|
/**
|
|
* %iwx_tx_cmd offload_assist values
|
|
* @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
|
|
* from mac header end. For normal case it is 4 words for SNAP.
|
|
* note: tx_cmd, mac header and pad are not counted in the offset.
|
|
* This is used to help the offload in case there is tunneling such as
|
|
* IPv6 in IPv4, in such case the ip header offset should point to the
|
|
* inner ip header and IPv4 checksum of the external header should be
|
|
* calculated by driver.
|
|
* @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum
|
|
* @TX_CMD_OFFLD_L3_EN: enable IP header checksum
|
|
* @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV
|
|
* field. Doesn't include the pad.
|
|
* @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for
|
|
* alignment
|
|
* @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU
|
|
*/
|
|
#define IWX_TX_CMD_OFFLD_IP_HDR(x) ((x) << 0)
|
|
#define IWX_TX_CMD_OFFLD_L4_EN (1 << 6)
|
|
#define IWX_TX_CMD_OFFLD_L3_EN (1 << 7)
|
|
#define IWX_TX_CMD_OFFLD_MH_SIZE(x) ((x) << 8)
|
|
#define IWX_TX_CMD_OFFLD_PAD (1 << 13)
|
|
#define IWX_TX_CMD_OFFLD_AMSDU (1 << 14)
|
|
#define IWX_TX_CMD_OFFLD_MH_MASK 0x1f
|
|
#define IWX_TX_CMD_OFFLD_IP_HDR_MASK 0x3f
|
|
|
|
struct iwx_dram_sec_info {
|
|
uint32_t pn_low;
|
|
uint16_t pn_high;
|
|
uint16_t aux_info;
|
|
} __packed; /* DRAM_SEC_INFO_API_S_VER_1 */
|
|
|
|
/**
|
|
* bitmasks for tx_flags in TX command for 22000
|
|
* @IWX_TX_FLAGS_CMD_RATE: use rate from the TX command
|
|
* @IWX_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs
|
|
* to a secured STA
|
|
* @IWX_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate
|
|
* selection, retry limits and BT kill
|
|
*/
|
|
/* Valid for TX_FLAGS_BITS_API_S_VER_3: */
|
|
#define IWX_TX_FLAGS_CMD_RATE (1 << 0)
|
|
#define IWX_TX_FLAGS_ENCRYPT_DIS (1 << 1)
|
|
#define IWX_TX_FLAGS_HIGH_PRI (1 << 2)
|
|
/* Valid for TX_FLAGS_BITS_API_S_VER_4 and above: */
|
|
#define IWX_TX_FLAGS_RTS (1 << 3)
|
|
#define IWX_TX_FLAGS_CTS (1 << 4)
|
|
/* TX_FLAGS_BITS_API_S_VER_4 */
|
|
|
|
/**
|
|
* struct iwx_tx_cmd_gen2 - TX command struct to FW for 22000 devices
|
|
* ( TX_CMD = 0x1c )
|
|
* @len: in bytes of the payload, see below for details
|
|
* @offload_assist: TX offload configuration
|
|
* @flags: combination of TX_FLAGS_*
|
|
* @dram_info: FW internal DRAM storage
|
|
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
|
|
* cleared. Combination of RATE_MCS_*
|
|
* @hdr: 802.11 header
|
|
*/
|
|
struct iwx_tx_cmd_gen2 {
|
|
uint16_t len;
|
|
uint16_t offload_assist;
|
|
uint32_t flags;
|
|
struct iwx_dram_sec_info dram_info;
|
|
uint32_t rate_n_flags;
|
|
struct ieee80211_frame hdr[0];
|
|
} __packed; /* TX_CMD_API_S_VER_7,
|
|
TX_CMD_API_S_VER_9 */
|
|
|
|
/**
|
|
* struct iwx_tx_cmd_gen3 - TX command struct to FW for AX210+ devices
|
|
* ( TX_CMD = 0x1c )
|
|
* @len: in bytes of the payload, see below for details
|
|
* @flags: combination of TX_FLAGS_*
|
|
* @offload_assist: TX offload configuration
|
|
* @dram_info: FW internal DRAM storage
|
|
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
|
|
* cleared. Combination of RATE_MCS_*
|
|
* @reserved: reserved
|
|
* @hdr: 802.11 header
|
|
*/
|
|
struct iwx_tx_cmd_gen3 {
|
|
uint16_t len;
|
|
uint16_t flags;
|
|
uint32_t offload_assist;
|
|
struct iwx_dram_sec_info dram_info;
|
|
uint32_t rate_n_flags;
|
|
uint8_t reserved[8];
|
|
struct ieee80211_frame hdr[];
|
|
} __packed; /* TX_CMD_API_S_VER_8,
|
|
TX_CMD_API_S_VER_10 */
|
|
|
|
/*
|
|
* TX response related data
|
|
*/
|
|
|
|
/*
|
|
* status that is returned by the fw after attempts to Tx
|
|
* @IWX_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
|
|
* STA table
|
|
* Valid only if frame_count =1
|
|
*/
|
|
#define IWX_TX_STATUS_MSK 0x000000ff
|
|
#define IWX_TX_STATUS_SUCCESS 0x01
|
|
#define IWX_TX_STATUS_DIRECT_DONE 0x02
|
|
/* postpone TX */
|
|
#define IWX_TX_STATUS_POSTPONE_DELAY 0x40
|
|
#define IWX_TX_STATUS_POSTPONE_FEW_BYTES 0x41
|
|
#define IWX_TX_STATUS_POSTPONE_BT_PRIO 0x42
|
|
#define IWX_TX_STATUS_POSTPONE_QUIET_PERIOD 0x43
|
|
#define IWX_TX_STATUS_POSTPONE_CALC_TTAK 0x44
|
|
/* abort TX */
|
|
#define IWX_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY 0x81
|
|
#define IWX_TX_STATUS_FAIL_SHORT_LIMIT 0x82
|
|
#define IWX_TX_STATUS_FAIL_LONG_LIMIT 0x83
|
|
#define IWX_TX_STATUS_FAIL_UNDERRUN 0x84
|
|
#define IWX_TX_STATUS_FAIL_DRAIN_FLOW 0x85
|
|
#define IWX_TX_STATUS_FAIL_RFKILL_FLUSH 0x86
|
|
#define IWX_TX_STATUS_FAIL_LIFE_EXPIRE 0x87
|
|
#define IWX_TX_STATUS_FAIL_DEST_PS 0x88
|
|
#define IWX_TX_STATUS_FAIL_HOST_ABORTED 0x89
|
|
#define IWX_TX_STATUS_FAIL_BT_RETRY 0x8a
|
|
#define IWX_TX_STATUS_FAIL_STA_INVALID 0x8b
|
|
#define IWX_TX_STATUS_FAIL_FRAG_DROPPED 0x8c
|
|
#define IWX_TX_STATUS_FAIL_TID_DISABLE 0x8d
|
|
#define IWX_TX_STATUS_FAIL_FIFO_FLUSHED 0x8e
|
|
#define IWX_TX_STATUS_FAIL_SMALL_CF_POLL 0x8f
|
|
#define IWX_TX_STATUS_FAIL_FW_DROP 0x90
|
|
#define IWX_TX_STATUS_FAIL_STA_COLOR_MISMATCH 0x91
|
|
#define IWX_TX_STATUS_INTERNAL_ABORT 0x92
|
|
#define IWX_TX_MODE_MSK 0x00000f00
|
|
#define IWX_TX_MODE_NO_BURST 0x00000000
|
|
#define IWX_TX_MODE_IN_BURST_SEQ 0x00000100
|
|
#define IWX_TX_MODE_FIRST_IN_BURST 0x00000200
|
|
#define IWX_TX_QUEUE_NUM_MSK 0x0001f000
|
|
#define IWX_TX_NARROW_BW_MSK 0x00060000
|
|
#define IWX_TX_NARROW_BW_1DIV2 0x00020000
|
|
#define IWX_TX_NARROW_BW_1DIV4 0x00040000
|
|
#define IWX_TX_NARROW_BW_1DIV8 0x00060000
|
|
|
|
/*
|
|
* TX aggregation status
|
|
* @IWX_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
|
|
* occur if tx failed for this frame when it was a member of a previous
|
|
* aggregation block). If rate scaling is used, retry count indicates the
|
|
* rate table entry used for all frames in the new agg.
|
|
* @IWX_AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
|
|
* this frame
|
|
*/
|
|
#define IWX_AGG_TX_STATE_STATUS_MSK 0x0fff
|
|
#define IWX_AGG_TX_STATE_TRANSMITTED 0x0000
|
|
#define IWX_AGG_TX_STATE_UNDERRUN 0x0001
|
|
#define IWX_AGG_TX_STATE_BT_PRIO 0x0002
|
|
#define IWX_AGG_TX_STATE_FEW_BYTES 0x0004
|
|
#define IWX_AGG_TX_STATE_ABORT 0x0008
|
|
#define IWX_AGG_TX_STATE_LAST_SENT_TTL 0x0010
|
|
#define IWX_AGG_TX_STATE_LAST_SENT_TRY_CNT 0x0020
|
|
#define IWX_AGG_TX_STATE_LAST_SENT_BT_KILL 0x0040
|
|
#define IWX_AGG_TX_STATE_SCD_QUERY 0x0080
|
|
#define IWX_AGG_TX_STATE_TEST_BAD_CRC32 0x0100
|
|
#define IWX_AGG_TX_STATE_RESPONSE 0x01ff
|
|
#define IWX_AGG_TX_STATE_DUMP_TX 0x0200
|
|
#define IWX_AGG_TX_STATE_DELAY_TX 0x0400
|
|
#define IWX_AGG_TX_STATE_TRY_CNT_POS 12
|
|
#define IWX_AGG_TX_STATE_TRY_CNT_MSK (0xf << IWX_AGG_TX_STATE_TRY_CNT_POS)
|
|
|
|
#define IWX_AGG_TX_STATE_LAST_SENT_MSK (IWX_AGG_TX_STATE_LAST_SENT_TTL| \
|
|
IWX_AGG_TX_STATE_LAST_SENT_TRY_CNT| \
|
|
IWX_AGG_TX_STATE_LAST_SENT_BT_KILL)
|
|
|
|
/*
|
|
* The mask below describes a status where we are absolutely sure that the MPDU
|
|
* wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
|
|
* written the bytes to the TXE, but we know nothing about what the DSP did.
|
|
*/
|
|
#define IWX_AGG_TX_STAT_FRAME_NOT_SENT (IWX_AGG_TX_STATE_FEW_BYTES | \
|
|
IWX_AGG_TX_STATE_ABORT | \
|
|
IWX_AGG_TX_STATE_SCD_QUERY)
|
|
|
|
/*
|
|
* IWX_REPLY_TX = 0x1c (response)
|
|
*
|
|
* This response may be in one of two slightly different formats, indicated
|
|
* by the frame_count field:
|
|
*
|
|
* 1) No aggregation (frame_count == 1). This reports Tx results for a single
|
|
* frame. Multiple attempts, at various bit rates, may have been made for
|
|
* this frame.
|
|
*
|
|
* 2) Aggregation (frame_count > 1). This reports Tx results for two or more
|
|
* frames that used block-acknowledge. All frames were transmitted at
|
|
* same rate. Rate scaling may have been used if first frame in this new
|
|
* agg block failed in previous agg block(s).
|
|
*
|
|
* Note that, for aggregation, ACK (block-ack) status is not delivered
|
|
* here; block-ack has not been received by the time the device records
|
|
* this status.
|
|
* This status relates to reasons the tx might have been blocked or aborted
|
|
* within the device, rather than whether it was received successfully by
|
|
* the destination station.
|
|
*/
|
|
|
|
/**
|
|
* struct iwx_agg_tx_status - per packet TX aggregation status
|
|
* @status: enum iwx_tx_agg_status
|
|
* @sequence: Sequence # for this frame's Tx cmd (not SSN!)
|
|
*/
|
|
struct iwx_agg_tx_status {
|
|
uint16_t status;
|
|
uint16_t sequence;
|
|
} __packed;
|
|
|
|
/*
|
|
* definitions for initial rate index field
|
|
* bits [3:0] initial rate index
|
|
* bits [6:4] rate table color, used for the initial rate
|
|
* bit-7 invalid rate indication
|
|
*/
|
|
#define IWX_TX_RES_INIT_RATE_INDEX_MSK 0x0f
|
|
#define IWX_TX_RES_RATE_TABLE_COLOR_MSK 0x70
|
|
#define IWX_TX_RES_INV_RATE_INDEX_MSK 0x80
|
|
|
|
#define IWX_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
|
|
#define IWX_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
|
|
|
|
/**
|
|
* struct iwx_tx_resp_v3 - notifies that fw is TXing a packet
|
|
* ( IWX_REPLY_TX = 0x1c )
|
|
* @frame_count: 1 no aggregation, >1 aggregation
|
|
* @bt_kill_count: num of times blocked by bluetooth (unused for agg)
|
|
* @failure_rts: num of failures due to unsuccessful RTS
|
|
* @failure_frame: num failures due to no ACK (unused for agg)
|
|
* @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
|
|
* Tx of all the batch. IWX_RATE_MCS_*
|
|
* @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
|
|
* for agg: RTS + CTS + aggregation tx time + block-ack time.
|
|
* in usec.
|
|
* @pa_status: tx power info
|
|
* @pa_integ_res_a: tx power info
|
|
* @pa_integ_res_b: tx power info
|
|
* @pa_integ_res_c: tx power info
|
|
* @measurement_req_id: tx power info
|
|
* @tfd_info: TFD information set by the FH
|
|
* @seq_ctl: sequence control from the Tx cmd
|
|
* @byte_cnt: byte count from the Tx cmd
|
|
* @tlc_info: TLC rate info
|
|
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
|
|
* @frame_ctrl: frame control
|
|
* @status: for non-agg: frame status IWX_TX_STATUS_*
|
|
* for agg: status of 1st frame, IWX_AGG_TX_STATE_*; other frame status fields
|
|
* follow this one, up to frame_count.
|
|
*
|
|
* After the array of statuses comes the SSN of the SCD. Look at
|
|
* %iwx_get_scd_ssn for more details.
|
|
*/
|
|
struct iwx_tx_resp_v3 {
|
|
uint8_t frame_count;
|
|
uint8_t bt_kill_count;
|
|
uint8_t failure_rts;
|
|
uint8_t failure_frame;
|
|
uint32_t initial_rate;
|
|
uint16_t wireless_media_time;
|
|
|
|
uint8_t pa_status;
|
|
uint8_t pa_integ_res_a[3];
|
|
uint8_t pa_integ_res_b[3];
|
|
uint8_t pa_integ_res_c[3];
|
|
uint16_t measurement_req_id;
|
|
uint16_t reserved;
|
|
|
|
uint32_t tfd_info;
|
|
uint16_t seq_ctl;
|
|
uint16_t byte_cnt;
|
|
uint8_t tlc_info;
|
|
uint8_t ra_tid;
|
|
uint16_t frame_ctrl;
|
|
|
|
struct iwx_agg_tx_status status;
|
|
} __packed; /* IWX_TX_RSP_API_S_VER_3 */
|
|
|
|
/**
|
|
* struct iwx_tx_resp - notifies that fw is TXing a packet
|
|
* ( REPLY_TX = 0x1c )
|
|
* @frame_count: 1 no aggregation, >1 aggregation
|
|
* @bt_kill_count: num of times blocked by bluetooth (unused for agg)
|
|
* @failure_rts: num of failures due to unsuccessful RTS
|
|
* @failure_frame: num failures due to no ACK (unused for agg)
|
|
* @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
|
|
* Tx of all the batch. RATE_MCS_*
|
|
* @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
|
|
* for agg: RTS + CTS + aggregation tx time + block-ack time.
|
|
* in usec.
|
|
* @pa_status: tx power info
|
|
* @pa_integ_res_a: tx power info
|
|
* @pa_integ_res_b: tx power info
|
|
* @pa_integ_res_c: tx power info
|
|
* @measurement_req_id: tx power info
|
|
* @reduced_tpc: transmit power reduction used
|
|
* @reserved: reserved
|
|
* @tfd_info: TFD information set by the FH
|
|
* @seq_ctl: sequence control from the Tx cmd
|
|
* @byte_cnt: byte count from the Tx cmd
|
|
* @tlc_info: TLC rate info
|
|
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
|
|
* @frame_ctrl: frame control
|
|
* @tx_queue: TX queue for this response
|
|
* @reserved2: reserved for padding/alignment
|
|
* @status: for non-agg: frame status TX_STATUS_*
|
|
* For version 6 TX response isn't received for aggregation at all.
|
|
*
|
|
* After the array of statuses comes the SSN of the SCD. Look at
|
|
* %iwl_mvm_get_scd_ssn for more details.
|
|
*/
|
|
struct iwx_tx_resp {
|
|
uint8_t frame_count;
|
|
uint8_t bt_kill_count;
|
|
uint8_t failure_rts;
|
|
uint8_t failure_frame;
|
|
uint32_t initial_rate;
|
|
uint16_t wireless_media_time;
|
|
|
|
uint8_t pa_status;
|
|
uint8_t pa_integ_res_a[3];
|
|
uint8_t pa_integ_res_b[3];
|
|
uint8_t pa_integ_res_c[3];
|
|
uint16_t measurement_req_id;
|
|
uint8_t reduced_tpc;
|
|
uint8_t reserved;
|
|
|
|
uint32_t tfd_info;
|
|
uint16_t seq_ctl;
|
|
uint16_t byte_cnt;
|
|
uint8_t tlc_info;
|
|
uint8_t ra_tid;
|
|
uint16_t frame_ctrl;
|
|
uint16_t tx_queue;
|
|
uint16_t reserved2;
|
|
struct iwx_agg_tx_status status;
|
|
} __packed; /* TX_RSP_API_S_VER_6 */
|
|
|
|
/**
|
|
* struct iwx_compressed_ba_tfd - progress of a TFD queue
|
|
* @q_num: TFD queue number
|
|
* @tfd_index: Index of first un-acked frame in the TFD queue
|
|
* @scd_queue: For debug only - the physical queue the TFD queue is bound to
|
|
* @tid: TID of the queue (0-7)
|
|
* @reserved: reserved for alignment
|
|
*/
|
|
struct iwx_compressed_ba_tfd {
|
|
uint16_t q_num;
|
|
uint16_t tfd_index;
|
|
uint8_t scd_queue;
|
|
uint8_t tid;
|
|
uint8_t reserved[2];
|
|
} __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_compressed_ba_ratid - progress of a RA TID queue
|
|
* @q_num: RA TID queue number
|
|
* @tid: TID of the queue
|
|
* @ssn: BA window current SSN
|
|
*/
|
|
struct iwx_compressed_ba_ratid {
|
|
uint8_t q_num;
|
|
uint8_t tid;
|
|
uint16_t ssn;
|
|
} __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */
|
|
|
|
/*
|
|
* enum iwx_ba_resp_flags - TX aggregation status
|
|
* @IWX_MVM_BA_RESP_TX_AGG: generated due to BA
|
|
* @IWX_MVM_BA_RESP_TX_BAR: generated due to BA after BAR
|
|
* @IWX_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA
|
|
* @IWX_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun
|
|
* @IWX_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill
|
|
* @IWX_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the
|
|
* expected time
|
|
*/
|
|
enum iwx_ba_resp_flags {
|
|
IWX_MVM_BA_RESP_TX_AGG,
|
|
IWX_MVM_BA_RESP_TX_BAR,
|
|
IWX_MVM_BA_RESP_TX_AGG_FAIL,
|
|
IWX_MVM_BA_RESP_TX_UNDERRUN,
|
|
IWX_MVM_BA_RESP_TX_BT_KILL,
|
|
IWX_MVM_BA_RESP_TX_DSP_TIMEOUT
|
|
};
|
|
|
|
/**
|
|
* struct iwx_compressed_ba_notif - notifies about reception of BA
|
|
* ( BA_NOTIF = 0xc5 )
|
|
* @flags: status flag, see the &iwx_ba_resp_flags
|
|
* @sta_id: Index of recipient (BA-sending) station in fw's station table
|
|
* @reduced_txp: power reduced according to TPC. This is the actual value and
|
|
* not a copy from the LQ command. Thus, if not the first rate was used
|
|
* for Tx-ing then this value will be set to 0 by FW.
|
|
* @tlc_rate_info: TLC rate info, initial rate index, TLC table color
|
|
* @retry_cnt: retry count
|
|
* @query_byte_cnt: SCD query byte count
|
|
* @query_frame_cnt: SCD query frame count
|
|
* @txed: number of frames sent in the aggregation (all-TIDs)
|
|
* @done: number of frames that were Acked by the BA (all-TIDs)
|
|
* @reserved: reserved (for alignment)
|
|
* @wireless_time: Wireless-media time
|
|
* @tx_rate: the rate the aggregation was sent at
|
|
* @tfd_cnt: number of TFD-Q elements
|
|
* @ra_tid_cnt: number of RATID-Q elements
|
|
* @tfd: array of TFD queue status updates. See &iwx_compressed_ba_tfd
|
|
* for details. Length in @tfd_cnt.
|
|
* @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
|
|
* &iwx_compressed_ba_ratid for more details. Length in @ra_tid_cnt.
|
|
*/
|
|
struct iwx_compressed_ba_notif {
|
|
uint32_t flags;
|
|
uint8_t sta_id;
|
|
uint8_t reduced_txp;
|
|
uint8_t tlc_rate_info;
|
|
uint8_t retry_cnt;
|
|
uint32_t query_byte_cnt;
|
|
uint16_t query_frame_cnt;
|
|
uint16_t txed;
|
|
uint16_t done;
|
|
uint16_t reserved;
|
|
uint32_t wireless_time;
|
|
uint32_t tx_rate;
|
|
uint16_t tfd_cnt;
|
|
uint16_t ra_tid_cnt;
|
|
struct iwx_compressed_ba_ratid ra_tid[0];
|
|
struct iwx_compressed_ba_tfd tfd[];
|
|
} __packed; /* COMPRESSED_BA_RES_API_S_VER_4 */
|
|
|
|
|
|
struct iwx_beacon_notif {
|
|
struct iwx_tx_resp_v3 beacon_notify_hdr;
|
|
uint64_t tsf;
|
|
uint32_t ibss_mgr_status;
|
|
} __packed;
|
|
|
|
/**
|
|
* dump (flush) control flags
|
|
* @IWX_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
|
|
* and the TFD queues are empty.
|
|
*/
|
|
#define IWX_DUMP_TX_FIFO_FLUSH (1 << 1)
|
|
|
|
/**
|
|
* struct iwx_tx_path_flush_cmd -- queue/FIFO flush command
|
|
* @queues_ctl: bitmap of queues to flush
|
|
* @flush_ctl: control flags
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_tx_path_flush_cmd_v1 {
|
|
uint32_t queues_ctl;
|
|
uint16_t flush_ctl;
|
|
uint16_t reserved;
|
|
} __packed; /* IWX_TX_PATH_FLUSH_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
|
|
* @sta_id: station ID to flush
|
|
* @tid_mask: TID mask to flush
|
|
* @reserved: reserved
|
|
*/
|
|
struct iwx_tx_path_flush_cmd {
|
|
uint32_t sta_id;
|
|
uint16_t tid_mask;
|
|
uint16_t reserved;
|
|
} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */
|
|
|
|
#define IWX_TX_FLUSH_QUEUE_RSP 16
|
|
|
|
/**
|
|
* struct iwx_flush_queue_info - virtual flush queue info
|
|
* @queue_num: virtual queue id
|
|
* @read_before_flush: read pointer before flush
|
|
* @read_after_flush: read pointer after flush
|
|
*/
|
|
struct iwx_flush_queue_info {
|
|
uint16_t tid;
|
|
uint16_t queue_num;
|
|
uint16_t read_before_flush;
|
|
uint16_t read_after_flush;
|
|
} __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_tx_path_flush_cmd_rsp -- queue/FIFO flush command response
|
|
* @num_flushed_queues: number of queues in queues array
|
|
* @queues: all flushed queues
|
|
*/
|
|
struct iwx_tx_path_flush_cmd_rsp {
|
|
uint16_t sta_id;
|
|
uint16_t num_flushed_queues;
|
|
struct iwx_flush_queue_info queues[IWX_TX_FLUSH_QUEUE_RSP];
|
|
} __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */
|
|
|
|
|
|
/**
|
|
* iwx_get_scd_ssn - returns the SSN of the SCD
|
|
* @tx_resp: the Tx response from the fw (agg or non-agg)
|
|
*
|
|
* When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since
|
|
* it can't know that everything will go well until the end of the AMPDU, it
|
|
* can't know in advance the number of MPDUs that will be sent in the current
|
|
* batch. This is why it writes the agg Tx response while it fetches the MPDUs.
|
|
* Hence, it can't know in advance what the SSN of the SCD will be at the end
|
|
* of the batch. This is why the SSN of the SCD is written at the end of the
|
|
* whole struct at a variable offset. This function knows how to cope with the
|
|
* variable offset and returns the SSN of the SCD.
|
|
*/
|
|
static inline uint32_t iwx_get_scd_ssn(struct iwx_tx_resp *tx_resp)
|
|
{
|
|
return le32_to_cpup((uint32_t *)&tx_resp->status +
|
|
tx_resp->frame_count) & 0xfff;
|
|
}
|
|
|
|
/**
|
|
* struct iwx_scd_txq_cfg_cmd - New txq hw scheduler config command
|
|
* @token:
|
|
* @sta_id: station id
|
|
* @tid:
|
|
* @scd_queue: scheduler queue to config
|
|
* @enable: 1 queue enable, 0 queue disable
|
|
* @aggregate: 1 aggregated queue, 0 otherwise
|
|
* @tx_fifo: %enum iwx_tx_fifo
|
|
* @window: BA window size
|
|
* @ssn: SSN for the BA agreement
|
|
*/
|
|
struct iwx_scd_txq_cfg_cmd {
|
|
uint8_t token;
|
|
uint8_t sta_id;
|
|
uint8_t tid;
|
|
uint8_t scd_queue;
|
|
uint8_t enable;
|
|
uint8_t aggregate;
|
|
uint8_t tx_fifo;
|
|
uint8_t window;
|
|
uint16_t ssn;
|
|
uint16_t reserved;
|
|
} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_scd_txq_cfg_rsp
|
|
* @token: taken from the command
|
|
* @sta_id: station id from the command
|
|
* @tid: tid from the command
|
|
* @scd_queue: scd_queue from the command
|
|
*/
|
|
struct iwx_scd_txq_cfg_rsp {
|
|
uint8_t token;
|
|
uint8_t sta_id;
|
|
uint8_t tid;
|
|
uint8_t scd_queue;
|
|
} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
|
|
|
|
|
|
/* Scan Commands, Responses, Notifications */
|
|
|
|
/* Max number of IEs for direct SSID scans in a command */
|
|
#define IWX_PROBE_OPTION_MAX 20
|
|
|
|
/**
|
|
* struct iwx_ssid_ie - directed scan network information element
|
|
*
|
|
* Up to 20 of these may appear in IWX_REPLY_SCAN_CMD,
|
|
* selected by "type" bit field in struct iwx_scan_channel;
|
|
* each channel may select different ssids from among the 20 entries.
|
|
* SSID IEs get transmitted in reverse order of entry.
|
|
*/
|
|
struct iwx_ssid_ie {
|
|
uint8_t id;
|
|
uint8_t len;
|
|
uint8_t ssid[IEEE80211_NWID_LEN];
|
|
} __packed; /* IWX_SCAN_DIRECT_SSID_IE_API_S_VER_1 */
|
|
|
|
/* scan offload */
|
|
#define IWX_SCAN_MAX_BLACKLIST_LEN 64
|
|
#define IWX_SCAN_SHORT_BLACKLIST_LEN 16
|
|
#define IWX_SCAN_MAX_PROFILES 11
|
|
#define IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE 512
|
|
|
|
/* Default watchdog (in MS) for scheduled scan iteration */
|
|
#define IWX_SCHED_SCAN_WATCHDOG cpu_to_le16(15000)
|
|
|
|
#define IWX_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
|
|
#define IWX_CAN_ABORT_STATUS 1
|
|
|
|
#define IWX_FULL_SCAN_MULTIPLIER 5
|
|
#define IWX_FAST_SCHED_SCAN_ITERATIONS 3
|
|
#define IWX_MAX_SCHED_SCAN_PLANS 2
|
|
|
|
/**
|
|
* iwx_scan_schedule_lmac - schedule of scan offload
|
|
* @delay: delay between iterations, in seconds.
|
|
* @iterations: num of scan iterations
|
|
* @full_scan_mul: number of partial scans before each full scan
|
|
*/
|
|
struct iwx_scan_schedule_lmac {
|
|
uint16_t delay;
|
|
uint8_t iterations;
|
|
uint8_t full_scan_mul;
|
|
} __packed; /* SCAN_SCHEDULE_API_S */
|
|
|
|
/**
|
|
* iwx_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
|
|
* @tx_flags: combination of TX_CMD_FLG_*
|
|
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
|
|
* cleared. Combination of RATE_MCS_*
|
|
* @sta_id: index of destination station in FW station table
|
|
* @reserved: for alignment and future use
|
|
*/
|
|
struct iwx_scan_req_tx_cmd {
|
|
uint32_t tx_flags;
|
|
uint32_t rate_n_flags;
|
|
uint8_t sta_id;
|
|
uint8_t reserved[3];
|
|
} __packed;
|
|
|
|
#define IWX_UNIFIED_SCAN_CHANNEL_FULL (1 << 27)
|
|
#define IWX_UNIFIED_SCAN_CHANNEL_PARTIAL (1 << 28)
|
|
|
|
/**
|
|
* iwx_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
|
|
* @flags: bits 1-20: directed scan to i'th ssid
|
|
* other bits &enum iwx_scan_channel_flags_lmac
|
|
* @channel_number: channel number 1-13 etc
|
|
* @iter_count: scan iteration on this channel
|
|
* @iter_interval: interval in seconds between iterations on one channel
|
|
*/
|
|
struct iwx_scan_channel_cfg_lmac {
|
|
uint32_t flags;
|
|
uint16_t channel_num;
|
|
uint16_t iter_count;
|
|
uint32_t iter_interval;
|
|
} __packed;
|
|
|
|
/*
|
|
* iwx_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
|
|
* @offset: offset in the data block
|
|
* @len: length of the segment
|
|
*/
|
|
struct iwx_scan_probe_segment {
|
|
uint16_t offset;
|
|
uint16_t len;
|
|
} __packed;
|
|
|
|
/* iwx_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2
|
|
* @mac_header: first (and common) part of the probe
|
|
* @band_data: band specific data
|
|
* @common_data: last (and common) part of the probe
|
|
* @buf: raw data block
|
|
*/
|
|
struct iwx_scan_probe_req_v1 {
|
|
struct iwx_scan_probe_segment mac_header;
|
|
struct iwx_scan_probe_segment band_data[2];
|
|
struct iwx_scan_probe_segment common_data;
|
|
uint8_t buf[IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE];
|
|
} __packed;
|
|
|
|
/* iwl_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_v2
|
|
* @mac_header: first (and common) part of the probe
|
|
* @band_data: band specific data
|
|
* @common_data: last (and common) part of the probe
|
|
* @buf: raw data block
|
|
*/
|
|
struct iwx_scan_probe_req {
|
|
struct iwx_scan_probe_segment mac_header;
|
|
struct iwx_scan_probe_segment band_data[3];
|
|
struct iwx_scan_probe_segment common_data;
|
|
uint8_t buf[IWX_SCAN_OFFLOAD_PROBE_REQ_SIZE];
|
|
} __packed;
|
|
|
|
|
|
#define IWX_SCAN_CHANNEL_FLAG_EBS (1 << 0)
|
|
#define IWX_SCAN_CHANNEL_FLAG_EBS_ACCURATE (1 << 1)
|
|
#define IWX_SCAN_CHANNEL_FLAG_CACHE_ADD (1 << 2)
|
|
#define IWX_SCAN_CHANNEL_FLAG_EBS_FRAG (1 << 3)
|
|
#define IWX_SCAN_CHANNEL_FLAG_FORCE_EBS (1 << 4)
|
|
#define IWX_SCAN_CHANNEL_FLAG_ENABLE_CHAN_ORDER (1 << 5)
|
|
#define IWX_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER (1 << 6)
|
|
|
|
/* iwx_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
|
|
* @flags: enum iwx_scan_channel_flags
|
|
* @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
|
|
* involved.
|
|
* 1 - EBS is disabled.
|
|
* 2 - every second scan will be full scan(and so on).
|
|
*/
|
|
struct iwx_scan_channel_opt {
|
|
uint16_t flags;
|
|
uint16_t non_ebs_ratio;
|
|
} __packed;
|
|
|
|
#define IWX_SCAN_PRIORITY_LOW 0
|
|
#define IWX_SCAN_PRIORITY_MEDIUM 1
|
|
#define IWX_SCAN_PRIORITY_HIGH 2
|
|
|
|
enum iwx_scan_priority_ext {
|
|
IWX_SCAN_PRIORITY_EXT_0_LOWEST,
|
|
IWX_SCAN_PRIORITY_EXT_1,
|
|
IWX_SCAN_PRIORITY_EXT_2,
|
|
IWX_SCAN_PRIORITY_EXT_3,
|
|
IWX_SCAN_PRIORITY_EXT_4,
|
|
IWX_SCAN_PRIORITY_EXT_5,
|
|
IWX_SCAN_PRIORITY_EXT_6,
|
|
IWX_SCAN_PRIORITY_EXT_7_HIGHEST,
|
|
};
|
|
|
|
/**
|
|
* iwx_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
|
|
* @last_schedule_line: last schedule line executed (fast or regular)
|
|
* @last_schedule_iteration: last scan iteration executed before scan abort
|
|
* @status: enum iwx_scan_offload_complete_status
|
|
* @ebs_status: EBS success status &enum iwx_scan_ebs_status
|
|
* @time_after_last_iter; time in seconds elapsed after last iteration
|
|
*/
|
|
struct iwx_periodic_scan_complete {
|
|
uint8_t last_schedule_line;
|
|
uint8_t last_schedule_iteration;
|
|
uint8_t status;
|
|
uint8_t ebs_status;
|
|
uint32_t time_after_last_iter;
|
|
uint32_t reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_scan_results_notif - scan results for one channel -
|
|
* SCAN_RESULT_NTF_API_S_VER_3
|
|
* @channel: which channel the results are from
|
|
* @band: 0 for 5.2 GHz, 1 for 2.4 GHz
|
|
* @probe_status: IWX_SCAN_PROBE_STATUS_*, indicates success of probe request
|
|
* @num_probe_not_sent: # of request that weren't sent due to not enough time
|
|
* @duration: duration spent in channel, in usecs
|
|
*/
|
|
struct iwx_scan_results_notif {
|
|
uint8_t channel;
|
|
uint8_t band;
|
|
uint8_t probe_status;
|
|
uint8_t num_probe_not_sent;
|
|
uint32_t duration;
|
|
} __packed;
|
|
|
|
#define IWX_SCAN_CLIENT_SCHED_SCAN (1 << 0)
|
|
#define IWX_SCAN_CLIENT_NETDETECT (1 << 1)
|
|
#define IWX_SCAN_CLIENT_ASSET_TRACKING (1 << 2)
|
|
|
|
/**
|
|
* iwx_scan_offload_blacklist - IWX_SCAN_OFFLOAD_BLACKLIST_S
|
|
* @ssid: MAC address to filter out
|
|
* @reported_rssi: AP rssi reported to the host
|
|
* @client_bitmap: clients ignore this entry - enum scan_framework_client
|
|
*/
|
|
struct iwx_scan_offload_blacklist {
|
|
uint8_t ssid[ETHER_ADDR_LEN];
|
|
uint8_t reported_rssi;
|
|
uint8_t client_bitmap;
|
|
} __packed;
|
|
|
|
#define IWX_NETWORK_TYPE_BSS 1
|
|
#define IWX_NETWORK_TYPE_IBSS 2
|
|
#define IWX_NETWORK_TYPE_ANY 3
|
|
|
|
#define IWX_SCAN_OFFLOAD_SELECT_2_4 0x4
|
|
#define IWX_SCAN_OFFLOAD_SELECT_5_2 0x8
|
|
#define IWX_SCAN_OFFLOAD_SELECT_ANY 0xc
|
|
|
|
/**
|
|
* iwx_scan_offload_profile - IWX_SCAN_OFFLOAD_PROFILE_S
|
|
* @ssid_index: index to ssid list in fixed part
|
|
* @unicast_cipher: encryption algorithm to match - bitmap
|
|
* @aut_alg: authentication algorithm to match - bitmap
|
|
* @network_type: enum iwx_scan_offload_network_type
|
|
* @band_selection: enum iwx_scan_offload_band_selection
|
|
* @client_bitmap: clients waiting for match - enum scan_framework_client
|
|
*/
|
|
struct iwx_scan_offload_profile {
|
|
uint8_t ssid_index;
|
|
uint8_t unicast_cipher;
|
|
uint8_t auth_alg;
|
|
uint8_t network_type;
|
|
uint8_t band_selection;
|
|
uint8_t client_bitmap;
|
|
uint8_t reserved[2];
|
|
} __packed;
|
|
|
|
/**
|
|
* iwx_scan_offload_profile_cfg - IWX_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
|
|
* @blacklist: AP list to filter off from scan results
|
|
* @profiles: profiles to search for match
|
|
* @blacklist_len: length of blacklist
|
|
* @num_profiles: num of profiles in the list
|
|
* @match_notify: clients waiting for match found notification
|
|
* @pass_match: clients waiting for the results
|
|
* @active_clients: active clients bitmap - enum scan_framework_client
|
|
* @any_beacon_notify: clients waiting for match notification without match
|
|
*/
|
|
struct iwx_scan_offload_profile_cfg {
|
|
struct iwx_scan_offload_profile profiles[IWX_SCAN_MAX_PROFILES];
|
|
uint8_t blacklist_len;
|
|
uint8_t num_profiles;
|
|
uint8_t match_notify;
|
|
uint8_t pass_match;
|
|
uint8_t active_clients;
|
|
uint8_t any_beacon_notify;
|
|
uint8_t reserved[2];
|
|
} __packed;
|
|
|
|
#define IWX_SCAN_OFFLOAD_COMPLETED 1
|
|
#define IWX_SCAN_OFFLOAD_ABORTED 2
|
|
|
|
/* UMAC Scan API */
|
|
|
|
#define IWX_SCAN_CONFIG_FLAG_ACTIVATE (1 << 0)
|
|
#define IWX_SCAN_CONFIG_FLAG_DEACTIVATE (1 << 1)
|
|
#define IWX_SCAN_CONFIG_FLAG_FORBID_CHUB_REQS (1 << 2)
|
|
#define IWX_SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS (1 << 3)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_TX_CHAINS (1 << 8)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_RX_CHAINS (1 << 9)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_AUX_STA_ID (1 << 10)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_ALL_TIMES (1 << 11)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES (1 << 12)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS (1 << 13)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_LEGACY_RATES (1 << 14)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_MAC_ADDR (1 << 15)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_FRAGMENTED (1 << 16)
|
|
#define IWX_SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED (1 << 17)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_CAM_MODE (1 << 18)
|
|
#define IWX_SCAN_CONFIG_FLAG_CLEAR_CAM_MODE (1 << 19)
|
|
#define IWX_SCAN_CONFIG_FLAG_SET_PROMISC_MODE (1 << 20)
|
|
#define IWX_SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE (1 << 21)
|
|
|
|
/* Bits 26-31 are for num of channels in channel_array */
|
|
#define IWX_SCAN_CONFIG_N_CHANNELS(n) ((n) << 26)
|
|
|
|
/* OFDM basic rates */
|
|
#define IWX_SCAN_CONFIG_RATE_6M (1 << 0)
|
|
#define IWX_SCAN_CONFIG_RATE_9M (1 << 1)
|
|
#define IWX_SCAN_CONFIG_RATE_12M (1 << 2)
|
|
#define IWX_SCAN_CONFIG_RATE_18M (1 << 3)
|
|
#define IWX_SCAN_CONFIG_RATE_24M (1 << 4)
|
|
#define IWX_SCAN_CONFIG_RATE_36M (1 << 5)
|
|
#define IWX_SCAN_CONFIG_RATE_48M (1 << 6)
|
|
#define IWX_SCAN_CONFIG_RATE_54M (1 << 7)
|
|
/* CCK basic rates */
|
|
#define IWX_SCAN_CONFIG_RATE_1M (1 << 8)
|
|
#define IWX_SCAN_CONFIG_RATE_2M (1 << 9)
|
|
#define IWX_SCAN_CONFIG_RATE_5M (1 << 10)
|
|
#define IWX_SCAN_CONFIG_RATE_11M (1 << 11)
|
|
|
|
/* Bits 16-27 are for supported rates */
|
|
#define IWX_SCAN_CONFIG_SUPPORTED_RATE(rate) ((rate) << 16)
|
|
|
|
#define IWX_CHANNEL_FLAG_EBS (1 << 0)
|
|
#define IWX_CHANNEL_FLAG_ACCURATE_EBS (1 << 1)
|
|
#define IWX_CHANNEL_FLAG_EBS_ADD (1 << 2)
|
|
#define IWX_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE (1 << 3)
|
|
|
|
/**
|
|
* struct iwx_scan_dwell
|
|
* @active: default dwell time for active scan
|
|
* @passive: default dwell time for passive scan
|
|
* @fragmented: default dwell time for fragmented scan
|
|
* @extended: default dwell time for channels 1, 6 and 11
|
|
*/
|
|
struct iwx_scan_dwell {
|
|
uint8_t active;
|
|
uint8_t passive;
|
|
uint8_t fragmented;
|
|
uint8_t extended;
|
|
} __packed;
|
|
|
|
|
|
#define IWX_SCAN_TWO_LMACS 2
|
|
#define IWX_SCAN_LB_LMAC_IDX 0 /* low-band */
|
|
#define IWX_SCAN_HB_LMAC_IDX 1 /* high-band */
|
|
|
|
/**
|
|
* struct iwl_scan_config
|
|
* @enable_cam_mode: whether to enable CAM mode.
|
|
* @enable_promiscuous_mode: whether to enable promiscuous mode
|
|
* @bcast_sta_id: the index of the station in the fw. Deprecated starting with
|
|
* API version 5.
|
|
* @reserved: reserved
|
|
* @tx_chains: valid_tx antenna - ANT_* definitions
|
|
* @rx_chains: valid_rx antenna - ANT_* definitions
|
|
*/
|
|
struct iwx_scan_config {
|
|
uint8_t enable_cam_mode;
|
|
uint8_t enable_promiscuous_mode;
|
|
uint8_t bcast_sta_id;
|
|
uint8_t reserved;
|
|
uint32_t tx_chains;
|
|
uint32_t rx_chains;
|
|
} __packed; /* SCAN_CONFIG_DB_CMD_API_S_5 */
|
|
|
|
/**
|
|
* struct iwx_scan_config_v2
|
|
* @flags: enum scan_config_flags
|
|
* @tx_chains: valid_tx antenna - ANT_* definitions
|
|
* @rx_chains: valid_rx antenna - ANT_* definitions
|
|
* @legacy_rates: default legacy rates - enum scan_config_rates
|
|
* @out_of_channel_time: default max out of serving channel time
|
|
* @suspend_time: default max suspend time
|
|
* @dwell_active: default dwell time for active scan
|
|
* @dwell_passive: default dwell time for passive scan
|
|
* @dwell_fragmented: default dwell time for fragmented scan
|
|
* @dwell_extended: default dwell time for channels 1, 6 and 11
|
|
* @mac_addr: default mac address to be used in probes
|
|
* @bcast_sta_id: the index of the station in the fw
|
|
* @channel_flags: default channel flags - enum iwx_channel_flags
|
|
* scan_config_channel_flag
|
|
* @channel_array: default supported channels
|
|
*/
|
|
struct iwx_scan_config_v2 {
|
|
uint32_t flags;
|
|
uint32_t tx_chains;
|
|
uint32_t rx_chains;
|
|
uint32_t legacy_rates;
|
|
uint32_t out_of_channel_time[IWX_SCAN_TWO_LMACS];
|
|
uint32_t suspend_time[IWX_SCAN_TWO_LMACS];
|
|
struct iwx_scan_dwell dwell;
|
|
uint8_t mac_addr[ETHER_ADDR_LEN];
|
|
uint8_t bcast_sta_id;
|
|
uint8_t channel_flags;
|
|
uint8_t channel_array[];
|
|
} __packed; /* SCAN_CONFIG_DB_CMD_API_S_2 */
|
|
|
|
/**
|
|
* iwx_umac_scan_flags
|
|
*@IWX_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
|
|
* can be preempted by other scan requests with higher priority.
|
|
* The low priority scan will be resumed when the higher priority scan is
|
|
* completed.
|
|
*@IWX_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
|
|
* when scan starts.
|
|
*/
|
|
#define IWX_UMAC_SCAN_FLAG_PREEMPTIVE (1 << 0)
|
|
#define IWX_UMAC_SCAN_FLAG_START_NOTIF (1 << 1)
|
|
|
|
#define IWX_UMAC_SCAN_UID_TYPE_OFFSET 0
|
|
#define IWX_UMAC_SCAN_UID_SEQ_OFFSET 8
|
|
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PERIODIC (1 << 0)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_OVER_BT (1 << 1)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PASS_ALL (1 << 2)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PASSIVE (1 << 3)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT (1 << 4)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE (1 << 5)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID (1 << 6)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_FRAGMENTED (1 << 7)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED (1 << 8)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_MATCH (1 << 9)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL (1 << 10)
|
|
/* Extended dwell is obsolete when adaptive dwell is used, making this
|
|
* bit reusable. Hence, probe request defer is used only when adaptive
|
|
* dwell is supported. */
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PROB_REQ_DEFER_SUPP (1 << 10)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_LMAC2_FRAGMENTED (1 << 11)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_ADAPTIVE_DWELL (1 << 13)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_MAX_CHNL_TIME (1 << 14)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_PROB_REQ_HIGH_TX_RATE (1 << 15)
|
|
|
|
/**
|
|
* UMAC scan general flags #2
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL: Whether to send a complete
|
|
* notification per channel or not.
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER: Whether to allow channel
|
|
* reorder optimization or not.
|
|
*/
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS2_NOTIF_PER_CHNL (1 << 0)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER (1 << 1)
|
|
|
|
/**
|
|
* UMAC scan general flags version 2
|
|
*
|
|
* The FW flags were reordered and hence the driver introduce version 2
|
|
*
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC: periodic or scheduled
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL: pass all probe responses and beacons
|
|
* during scan iterations
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE: send complete notification
|
|
* on every iteration instead of only once after the last iteration
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1: fragmented scan LMAC1
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2: fragmented scan LMAC2
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_MATCH: does this scan check for profile matching
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS: use all valid chains for RX
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL: works with adaptive dwell
|
|
* for active channel
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE: can be preempted by other requests
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_NTF_START: send notification of scan start
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID: matching on multiple SSIDs
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE: all the channels scanned
|
|
* as passive
|
|
* @IWX_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN: at the end of 2.4GHz and
|
|
* 5.2Ghz bands scan, trigger scan on 6GHz band to discover
|
|
* the reported collocated APs
|
|
*/
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC (1 << 0)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL (1 << 1)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE (1 << 2)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1 (1 << 3)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2 (1 << 4)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_MATCH (1 << 5)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS (1 << 6)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL (1 << 7)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE (1 << 8)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_NTF_START (1 << 9)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_MULTI_SSID (1 << 10)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE (1 << 11)
|
|
#define IWX_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN (1 << 12)
|
|
|
|
/**
|
|
* struct iwx_scan_channel_cfg_umac
|
|
* @flags: bitmap - 0-19: directed scan to i'th ssid.
|
|
* @channel_num: channel number 1-13 etc.
|
|
* @iter_count: repetition count for the channel.
|
|
* @iter_interval: interval between two scan iterations on one channel.
|
|
*/
|
|
struct iwx_scan_channel_cfg_umac {
|
|
uint32_t flags;
|
|
union {
|
|
struct {
|
|
uint8_t channel_num;
|
|
uint8_t iter_count;
|
|
uint16_t iter_interval;
|
|
} v1; /* SCAN_CHANNEL_CFG_S_VER1 */
|
|
struct {
|
|
uint8_t channel_num;
|
|
uint8_t band;
|
|
uint8_t iter_count;
|
|
uint8_t iter_interval;
|
|
} v2; /* SCAN_CHANNEL_CFG_S_VER{2,3,4} */
|
|
};
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_scan_umac_schedule
|
|
* @interval: interval in seconds between scan iterations
|
|
* @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop
|
|
* @reserved: for alignment and future use
|
|
*/
|
|
struct iwx_scan_umac_schedule {
|
|
uint16_t interval;
|
|
uint8_t iter_count;
|
|
uint8_t reserved;
|
|
} __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_scan_req_umac_tail - the rest of the UMAC scan request command
|
|
* parameters following channels configuration array.
|
|
* @schedule: two scheduling plans.
|
|
* @delay: delay in TUs before starting the first scan iteration
|
|
* @reserved: for future use and alignment
|
|
* @preq: probe request with IEs blocks
|
|
* @direct_scan: list of SSIDs for directed active scan
|
|
*/
|
|
struct iwx_scan_req_umac_tail_v1 {
|
|
/* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
|
|
struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS];
|
|
uint16_t delay;
|
|
uint16_t reserved;
|
|
/* SCAN_PROBE_PARAMS_API_S_VER_1 */
|
|
struct iwx_scan_probe_req_v1 preq;
|
|
struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_scan_req_umac_tail - the rest of the UMAC scan request command
|
|
* parameters following channels configuration array.
|
|
* @schedule: two scheduling plans.
|
|
* @delay: delay in TUs before starting the first scan iteration
|
|
* @reserved: for future use and alignment
|
|
* @preq: probe request with IEs blocks
|
|
* @direct_scan: list of SSIDs for directed active scan
|
|
*/
|
|
struct iwx_scan_req_umac_tail_v2 {
|
|
/* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
|
|
struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS];
|
|
uint16_t delay;
|
|
uint16_t reserved;
|
|
/* SCAN_PROBE_PARAMS_API_S_VER_2 */
|
|
struct iwx_scan_probe_req preq;
|
|
struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_scan_umac_chan_param
|
|
* @flags: channel flags &enum iwl_scan_channel_flags
|
|
* @count: num of channels in scan request
|
|
* @reserved: for future use and alignment
|
|
*/
|
|
struct iwx_scan_umac_chan_param {
|
|
uint8_t flags;
|
|
uint8_t count;
|
|
uint16_t reserved;
|
|
} __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_1 */
|
|
|
|
#define IWX_SCAN_LB_LMAC_IDX 0
|
|
#define IWX_SCAN_HB_LMAC_IDX 1
|
|
|
|
/**
|
|
* struct iwx_scan_req_umac
|
|
* @flags: &enum iwl_umac_scan_flags
|
|
* @uid: scan id, &enum iwl_umac_scan_uid_offsets
|
|
* @ooc_priority: out of channel priority - &enum iwl_scan_priority
|
|
* @general_flags: &enum iwl_umac_scan_general_flags
|
|
* @scan_start_mac_id: report the scan start TSF time according to this mac TSF
|
|
* @extended_dwell: dwell time for channels 1, 6 and 11
|
|
* @active_dwell: dwell time for active scan per LMAC
|
|
* @passive_dwell: dwell time for passive scan per LMAC
|
|
* @fragmented_dwell: dwell time for fragmented passive scan
|
|
* @adwell_default_n_aps: for adaptive dwell the default number of APs
|
|
* per channel
|
|
* @adwell_default_n_aps_social: for adaptive dwell the default
|
|
* number of APs per social (1,6,11) channel
|
|
* @general_flags2: &enum iwl_umac_scan_general_flags2
|
|
* @adwell_max_budget: for adaptive dwell the maximal budget of TU to be added
|
|
* to total scan time
|
|
* @max_out_time: max out of serving channel time, per LMAC - for CDB there
|
|
* are 2 LMACs (high band and low band)
|
|
* @suspend_time: max suspend time, per LMAC - for CDB there are 2 LMACs
|
|
* @scan_priority: scan internal prioritization &enum iwl_scan_priority
|
|
* @num_of_fragments: Number of fragments needed for full coverage per band.
|
|
* Relevant only for fragmented scan.
|
|
* @channel: &struct iwx_scan_umac_chan_param
|
|
* @reserved: for future use and alignment
|
|
* @reserved3: for future use and alignment
|
|
* @data: &struct iwx_scan_channel_cfg_umac and
|
|
* &struct iwx_scan_req_umac_tail
|
|
*/
|
|
struct iwx_scan_req_umac {
|
|
uint32_t flags;
|
|
uint32_t uid;
|
|
uint32_t ooc_priority;
|
|
/* SCAN_GENERAL_PARAMS_API_S_VER_1 */
|
|
uint16_t general_flags;
|
|
uint8_t reserved;
|
|
uint8_t scan_start_mac_id;
|
|
union {
|
|
struct {
|
|
uint8_t extended_dwell;
|
|
uint8_t active_dwell;
|
|
uint8_t passive_dwell;
|
|
uint8_t fragmented_dwell;
|
|
uint32_t max_out_time;
|
|
uint32_t suspend_time;
|
|
uint32_t scan_priority;
|
|
struct iwx_scan_umac_chan_param channel;
|
|
uint8_t data[];
|
|
} v1; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */
|
|
struct {
|
|
uint8_t extended_dwell;
|
|
uint8_t active_dwell;
|
|
uint8_t passive_dwell;
|
|
uint8_t fragmented_dwell;
|
|
uint32_t max_out_time[2];
|
|
uint32_t suspend_time[2];
|
|
uint32_t scan_priority;
|
|
struct iwx_scan_umac_chan_param channel;
|
|
uint8_t data[];
|
|
} v6; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_6 */
|
|
struct {
|
|
uint8_t active_dwell;
|
|
uint8_t passive_dwell;
|
|
uint8_t fragmented_dwell;
|
|
uint8_t adwell_default_n_aps;
|
|
uint8_t adwell_default_n_aps_social;
|
|
uint8_t reserved3;
|
|
uint16_t adwell_max_budget;
|
|
uint32_t max_out_time[2];
|
|
uint32_t suspend_time[2];
|
|
uint32_t scan_priority;
|
|
struct iwx_scan_umac_chan_param channel;
|
|
uint8_t data[];
|
|
} v7; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_7 */
|
|
struct {
|
|
uint8_t active_dwell[2];
|
|
uint8_t reserved2;
|
|
uint8_t adwell_default_n_aps;
|
|
uint8_t adwell_default_n_aps_social;
|
|
uint8_t general_flags2;
|
|
uint16_t adwell_max_budget;
|
|
uint32_t max_out_time[2];
|
|
uint32_t suspend_time[2];
|
|
uint32_t scan_priority;
|
|
uint8_t passive_dwell[2];
|
|
uint8_t num_of_fragments[2];
|
|
struct iwx_scan_umac_chan_param channel;
|
|
uint8_t data[];
|
|
} v8; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_8 */
|
|
struct {
|
|
uint8_t active_dwell[2];
|
|
uint8_t adwell_default_hb_n_aps;
|
|
uint8_t adwell_default_lb_n_aps;
|
|
uint8_t adwell_default_n_aps_social;
|
|
uint8_t general_flags2;
|
|
uint16_t adwell_max_budget;
|
|
uint32_t max_out_time[2];
|
|
uint32_t suspend_time[2];
|
|
uint32_t scan_priority;
|
|
uint8_t passive_dwell[2];
|
|
uint8_t num_of_fragments[2];
|
|
struct iwx_scan_umac_chan_param channel;
|
|
uint8_t data[];
|
|
} v9; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_9 */
|
|
};
|
|
} __packed;
|
|
|
|
#define IWX_SCAN_REQ_UMAC_SIZE_V8 sizeof(struct iwx_scan_req_umac)
|
|
#define IWX_SCAN_REQ_UMAC_SIZE_V7 48
|
|
#define IWX_SCAN_REQ_UMAC_SIZE_V6 44
|
|
#define IWX_SCAN_REQ_UMAC_SIZE_V1 36
|
|
|
|
/**
|
|
* struct iwx_scan_general_params_v10
|
|
* @flags: &enum iwx_umac_scan_flags
|
|
* @reserved: reserved for future
|
|
* @scan_start_mac_id: report the scan start TSF time according to this mac TSF
|
|
* @active_dwell: dwell time for active scan per LMAC
|
|
* @adwell_default_2g: adaptive dwell default number of APs
|
|
* for 2.4GHz channel
|
|
* @adwell_default_5g: adaptive dwell default number of APs
|
|
* for 5GHz channels
|
|
* @adwell_default_social_chn: adaptive dwell default number of
|
|
* APs per social channel
|
|
* @reserved1: reserved for future
|
|
* @adwell_max_budget: the maximal number of TUs that adaptive dwell
|
|
* can add to the total scan time
|
|
* @max_out_of_time: max out of serving channel time, per LMAC
|
|
* @suspend_time: max suspend time, per LMAC
|
|
* @scan_priority: priority of the request
|
|
* @passive_dwell: continues dwell time for passive channel
|
|
* (without adaptive dwell)
|
|
* @num_of_fragments: number of fragments needed for full fragmented
|
|
* scan coverage.
|
|
*/
|
|
struct iwx_scan_general_params_v10 {
|
|
uint16_t flags;
|
|
uint8_t reserved;
|
|
uint8_t scan_start_mac_id;
|
|
uint8_t active_dwell[IWX_SCAN_TWO_LMACS];
|
|
uint8_t adwell_default_2g;
|
|
uint8_t adwell_default_5g;
|
|
uint8_t adwell_default_social_chn;
|
|
uint8_t reserved1;
|
|
uint16_t adwell_max_budget;
|
|
uint32_t max_out_of_time[IWX_SCAN_TWO_LMACS];
|
|
uint32_t suspend_time[IWX_SCAN_TWO_LMACS];
|
|
uint32_t scan_priority;
|
|
uint8_t passive_dwell[IWX_SCAN_TWO_LMACS];
|
|
uint8_t num_of_fragments[IWX_SCAN_TWO_LMACS];
|
|
} __packed; /* SCAN_GENERAL_PARAMS_API_S_VER_10 */
|
|
|
|
/**
|
|
* struct iwx_scan_channel_params_v6
|
|
* @flags: channel flags &enum iwl_scan_channel_flags
|
|
* @count: num of channels in scan request
|
|
* @n_aps_override: override the number of APs the FW uses to calculate dwell
|
|
* time when adaptive dwell is used.
|
|
* Channel k will use n_aps_override[i] when BIT(20 + i) is set in
|
|
* channel_config[k].flags
|
|
* @channel_config: array of explicit channel configurations
|
|
* for 2.4Ghz and 5.2Ghz bands
|
|
*/
|
|
struct iwx_scan_channel_params_v6 {
|
|
uint8_t flags;
|
|
uint8_t count;
|
|
uint8_t n_aps_override[2];
|
|
struct iwx_scan_channel_cfg_umac channel_config[67];
|
|
} __packed; /* SCAN_CHANNEL_PARAMS_API_S_VER_6 */
|
|
|
|
/**
|
|
* struct iwx_scan_periodic_parms_v1
|
|
* @schedule: can scheduling parameter
|
|
* @delay: initial delay of the periodic scan in seconds
|
|
* @reserved: reserved for future
|
|
*/
|
|
struct iwx_scan_periodic_parms_v1 {
|
|
struct iwx_scan_umac_schedule schedule[IWX_MAX_SCHED_SCAN_PLANS];
|
|
uint16_t delay;
|
|
uint16_t reserved;
|
|
} __packed; /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
|
|
|
|
#define IWX_SCAN_SHORT_SSID_MAX_SIZE 8
|
|
#define IWX_SCAN_BSSID_MAX_SIZE 16
|
|
|
|
/**
|
|
* struct iwx_scan_probe_params_v4
|
|
* @preq: scan probe request params
|
|
* @short_ssid_num: number of valid short SSIDs in short ssid array
|
|
* @bssid_num: number of valid bssid in bssids array
|
|
* @reserved: reserved
|
|
* @direct_scan: list of ssids
|
|
* @short_ssid: array of short ssids
|
|
* @bssid_array: array of bssids
|
|
*/
|
|
struct iwx_scan_probe_params_v4 {
|
|
struct iwx_scan_probe_req preq;
|
|
uint8_t short_ssid_num;
|
|
uint8_t bssid_num;
|
|
uint16_t reserved;
|
|
struct iwx_ssid_ie direct_scan[IWX_PROBE_OPTION_MAX];
|
|
uint32_t short_ssid[IWX_SCAN_SHORT_SSID_MAX_SIZE];
|
|
uint8_t bssid_array[IWX_SCAN_BSSID_MAX_SIZE][ETHER_ADDR_LEN];
|
|
} __packed; /* SCAN_PROBE_PARAMS_API_S_VER_4 */
|
|
|
|
/**
|
|
* struct iwx_scan_req_params_v14
|
|
* @general_params: &struct iwx_scan_general_params_v10
|
|
* @channel_params: &struct iwx_scan_channel_params_v6
|
|
* @periodic_params: &struct iwx_scan_periodic_parms_v1
|
|
* @probe_params: &struct iwx_scan_probe_params_v4
|
|
*/
|
|
struct iwx_scan_req_params_v14 {
|
|
struct iwx_scan_general_params_v10 general_params;
|
|
struct iwx_scan_channel_params_v6 channel_params;
|
|
struct iwx_scan_periodic_parms_v1 periodic_params;
|
|
struct iwx_scan_probe_params_v4 probe_params;
|
|
} __packed; /* SCAN_REQUEST_PARAMS_API_S_VER_14 */
|
|
|
|
/**
|
|
* struct iwx_scan_req_umac_v14
|
|
* @uid: scan id, &enum iwl_umac_scan_uid_offsets
|
|
* @ooc_priority: out of channel priority - &enum iwx_scan_priority
|
|
* @scan_params: scan parameters
|
|
*/
|
|
struct iwx_scan_req_umac_v14 {
|
|
uint32_t uid;
|
|
uint32_t ooc_priority;
|
|
struct iwx_scan_req_params_v14 scan_params;
|
|
} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_14 */
|
|
|
|
/**
|
|
* struct iwx_umac_scan_abort
|
|
* @uid: scan id, &enum iwx_umac_scan_uid_offsets
|
|
* @flags: reserved
|
|
*/
|
|
struct iwx_umac_scan_abort {
|
|
uint32_t uid;
|
|
uint32_t flags;
|
|
} __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_umac_scan_complete
|
|
* @uid: scan id, &enum iwx_umac_scan_uid_offsets
|
|
* @last_schedule: last scheduling line
|
|
* @last_iter: last scan iteration number
|
|
* @scan status: &enum iwx_scan_offload_complete_status
|
|
* @ebs_status: &enum iwx_scan_ebs_status
|
|
* @time_from_last_iter: time elapsed from last iteration
|
|
* @reserved: for future use
|
|
*/
|
|
struct iwx_umac_scan_complete {
|
|
uint32_t uid;
|
|
uint8_t last_schedule;
|
|
uint8_t last_iter;
|
|
uint8_t status;
|
|
uint8_t ebs_status;
|
|
uint32_t time_from_last_iter;
|
|
uint32_t reserved;
|
|
} __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */
|
|
|
|
#define IWX_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN 5
|
|
/**
|
|
* struct iwx_scan_offload_profile_match - match information
|
|
* @bssid: matched bssid
|
|
* @channel: channel where the match occurred
|
|
* @energy:
|
|
* @matching_feature:
|
|
* @matching_channels: bitmap of channels that matched, referencing
|
|
* the channels passed in tue scan offload request
|
|
*/
|
|
struct iwx_scan_offload_profile_match {
|
|
uint8_t bssid[ETHER_ADDR_LEN];
|
|
uint16_t reserved;
|
|
uint8_t channel;
|
|
uint8_t energy;
|
|
uint8_t matching_feature;
|
|
uint8_t matching_channels[IWX_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN];
|
|
} __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_scan_offload_profiles_query - match results query response
|
|
* @matched_profiles: bitmap of matched profiles, referencing the
|
|
* matches passed in the scan offload request
|
|
* @last_scan_age: age of the last offloaded scan
|
|
* @n_scans_done: number of offloaded scans done
|
|
* @gp2_d0u: GP2 when D0U occurred
|
|
* @gp2_invoked: GP2 when scan offload was invoked
|
|
* @resume_while_scanning: not used
|
|
* @self_recovery: obsolete
|
|
* @reserved: reserved
|
|
* @matches: array of match information, one for each match
|
|
*/
|
|
struct iwx_scan_offload_profiles_query {
|
|
uint32_t matched_profiles;
|
|
uint32_t last_scan_age;
|
|
uint32_t n_scans_done;
|
|
uint32_t gp2_d0u;
|
|
uint32_t gp2_invoked;
|
|
uint8_t resume_while_scanning;
|
|
uint8_t self_recovery;
|
|
uint16_t reserved;
|
|
struct iwx_scan_offload_profile_match matches[IWX_SCAN_MAX_PROFILES];
|
|
} __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_umac_scan_iter_complete_notif - notifies end of scanning iteration
|
|
* @uid: scan id, &enum iwx_umac_scan_uid_offsets
|
|
* @scanned_channels: number of channels scanned and number of valid elements in
|
|
* results array
|
|
* @status: one of SCAN_COMP_STATUS_*
|
|
* @bt_status: BT on/off status
|
|
* @last_channel: last channel that was scanned
|
|
* @tsf_low: TSF timer (lower half) in usecs
|
|
* @tsf_high: TSF timer (higher half) in usecs
|
|
* @results: array of scan results, only "scanned_channels" of them are valid
|
|
*/
|
|
struct iwx_umac_scan_iter_complete_notif {
|
|
uint32_t uid;
|
|
uint8_t scanned_channels;
|
|
uint8_t status;
|
|
uint8_t bt_status;
|
|
uint8_t last_channel;
|
|
uint32_t tsf_low;
|
|
uint32_t tsf_high;
|
|
struct iwx_scan_results_notif results[];
|
|
} __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_1 */
|
|
|
|
#define IWX_GSCAN_START_CMD 0x0
|
|
#define IWX_GSCAN_STOP_CMD 0x1
|
|
#define IWX_GSCAN_SET_HOTLIST_CMD 0x2
|
|
#define IWX_GSCAN_RESET_HOTLIST_CMD 0x3
|
|
#define IWX_GSCAN_SET_SIGNIFICANT_CHANGE_CMD 0x4
|
|
#define IWX_GSCAN_RESET_SIGNIFICANT_CHANGE_CMD 0x5
|
|
#define IWX_GSCAN_SIGNIFICANT_CHANGE_EVENT 0xFD
|
|
#define IWX_GSCAN_HOTLIST_CHANGE_EVENT 0xFE
|
|
#define IWX_GSCAN_RESULTS_AVAILABLE_EVENT 0xFF
|
|
|
|
/* STA API */
|
|
|
|
/**
|
|
* flags for the ADD_STA host command
|
|
* @IWX_STA_FLG_REDUCED_TX_PWR_CTRL:
|
|
* @IWX_STA_FLG_REDUCED_TX_PWR_DATA:
|
|
* @IWX_STA_FLG_DISABLE_TX: set if TX should be disabled
|
|
* @IWX_STA_FLG_PS: set if STA is in Power Save
|
|
* @IWX_STA_FLG_INVALID: set if STA is invalid
|
|
* @IWX_STA_FLG_DLP_EN: Direct Link Protocol is enabled
|
|
* @IWX_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs
|
|
* @IWX_STA_FLG_DRAIN_FLOW: drain flow
|
|
* @IWX_STA_FLG_PAN: STA is for PAN interface
|
|
* @IWX_STA_FLG_CLASS_AUTH:
|
|
* @IWX_STA_FLG_CLASS_ASSOC:
|
|
* @IWX_STA_FLG_CLASS_MIMO_PROT:
|
|
* @IWX_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU
|
|
* @IWX_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation
|
|
* @IWX_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is
|
|
* initialised by driver and can be updated by fw upon reception of
|
|
* action frames that can change the channel width. When cleared the fw
|
|
* will send all the frames in 20MHz even when FAT channel is requested.
|
|
* @IWX_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the
|
|
* driver and can be updated by fw upon reception of action frames.
|
|
* @IWX_STA_FLG_MFP_EN: Management Frame Protection
|
|
*/
|
|
#define IWX_STA_FLG_REDUCED_TX_PWR_CTRL (1 << 3)
|
|
#define IWX_STA_FLG_REDUCED_TX_PWR_DATA (1 << 6)
|
|
|
|
#define IWX_STA_FLG_DISABLE_TX (1 << 4)
|
|
|
|
#define IWX_STA_FLG_PS (1 << 8)
|
|
#define IWX_STA_FLG_DRAIN_FLOW (1 << 12)
|
|
#define IWX_STA_FLG_PAN (1 << 13)
|
|
#define IWX_STA_FLG_CLASS_AUTH (1 << 14)
|
|
#define IWX_STA_FLG_CLASS_ASSOC (1 << 15)
|
|
#define IWX_STA_FLG_RTS_MIMO_PROT (1 << 17)
|
|
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_SHIFT 19
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_8K (0 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_16K (1 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_32K (2 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_64K (3 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_128K (4 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_256K (5 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_512K (6 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_1024K (7 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_2M (8 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_4M (9 << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
#define IWX_STA_FLG_MAX_AGG_SIZE_MSK (0xf << IWX_STA_FLG_MAX_AGG_SIZE_SHIFT)
|
|
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_SHIFT 23
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_2US (4 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT)
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_4US (5 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT)
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_8US (6 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT)
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_16US (7 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT)
|
|
#define IWX_STA_FLG_AGG_MPDU_DENS_MSK (7 << IWX_STA_FLG_AGG_MPDU_DENS_SHIFT)
|
|
|
|
#define IWX_STA_FLG_FAT_EN_20MHZ (0 << 26)
|
|
#define IWX_STA_FLG_FAT_EN_40MHZ (1 << 26)
|
|
#define IWX_STA_FLG_FAT_EN_80MHZ (2 << 26)
|
|
#define IWX_STA_FLG_FAT_EN_160MHZ (3 << 26)
|
|
#define IWX_STA_FLG_FAT_EN_MSK (3 << 26)
|
|
|
|
#define IWX_STA_FLG_MIMO_EN_SISO (0 << 28)
|
|
#define IWX_STA_FLG_MIMO_EN_MIMO2 (1 << 28)
|
|
#define IWX_STA_FLG_MIMO_EN_MIMO3 (2 << 28)
|
|
#define IWX_STA_FLG_MIMO_EN_MSK (3 << 28)
|
|
|
|
/**
|
|
* key flags for the ADD_STA host command
|
|
* @IWX_STA_KEY_FLG_NO_ENC: no encryption
|
|
* @IWX_STA_KEY_FLG_WEP: WEP encryption algorithm
|
|
* @IWX_STA_KEY_FLG_CCM: CCMP encryption algorithm
|
|
* @IWX_STA_KEY_FLG_TKIP: TKIP encryption algorithm
|
|
* @IWX_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support)
|
|
* @IWX_STA_KEY_FLG_CMAC: CMAC encryption algorithm
|
|
* @IWX_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm
|
|
* @IWX_STA_KEY_FLG_EN_MSK: mask for encryption algorithm value
|
|
* @IWX_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from
|
|
* station info array (1 - n 1X mode)
|
|
* @IWX_STA_KEY_FLG_KEYID_MSK: the index of the key
|
|
* @IWX_STA_KEY_NOT_VALID: key is invalid
|
|
* @IWX_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key
|
|
* @IWX_STA_KEY_MULTICAST: set for multicast key
|
|
* @IWX_STA_KEY_MFP: key is used for Management Frame Protection
|
|
*/
|
|
#define IWX_STA_KEY_FLG_NO_ENC (0 << 0)
|
|
#define IWX_STA_KEY_FLG_WEP (1 << 0)
|
|
#define IWX_STA_KEY_FLG_CCM (2 << 0)
|
|
#define IWX_STA_KEY_FLG_TKIP (3 << 0)
|
|
#define IWX_STA_KEY_FLG_EXT (4 << 0)
|
|
#define IWX_STA_KEY_FLG_CMAC (6 << 0)
|
|
#define IWX_STA_KEY_FLG_ENC_UNKNOWN (7 << 0)
|
|
#define IWX_STA_KEY_FLG_EN_MSK (7 << 0)
|
|
#define IWX_STA_KEY_FLG_WEP_KEY_MAP (1 << 3)
|
|
#define IWX_STA_KEY_FLG_KEYID_POS 8
|
|
#define IWX_STA_KEY_FLG_KEYID_MSK (3 << IWX_STA_KEY_FLG_KEYID_POS)
|
|
#define IWX_STA_KEY_NOT_VALID (1 << 11)
|
|
#define IWX_STA_KEY_FLG_WEP_13BYTES (1 << 12)
|
|
#define IWX_STA_KEY_MULTICAST (1 << 14)
|
|
#define IWX_STA_KEY_MFP (1 << 15)
|
|
|
|
/**
|
|
* indicate to the fw what flag are being changed
|
|
* @IWX_STA_MODIFY_QUEUE_REMOVAL: this command removes a queue
|
|
* @IWX_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx
|
|
* @IWX_STA_MODIFY_TX_RATE: unused
|
|
* @IWX_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid
|
|
* @IWX_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid
|
|
* @IWX_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count
|
|
* @IWX_STA_MODIFY_PROT_TH:
|
|
* @IWX_STA_MODIFY_QUEUES: modify the queues used by this station
|
|
*/
|
|
#define IWX_STA_MODIFY_QUEUE_REMOVAL (1 << 0)
|
|
#define IWX_STA_MODIFY_TID_DISABLE_TX (1 << 1)
|
|
#define IWX_STA_MODIFY_TX_RATE (1 << 2)
|
|
#define IWX_STA_MODIFY_ADD_BA_TID (1 << 3)
|
|
#define IWX_STA_MODIFY_REMOVE_BA_TID (1 << 4)
|
|
#define IWX_STA_MODIFY_SLEEPING_STA_TX_COUNT (1 << 5)
|
|
#define IWX_STA_MODIFY_PROT_TH (1 << 6)
|
|
#define IWX_STA_MODIFY_QUEUES (1 << 7)
|
|
|
|
#define IWX_STA_MODE_MODIFY 1
|
|
|
|
/**
|
|
* type of sleep of the station
|
|
* @IWX_STA_SLEEP_STATE_AWAKE:
|
|
* @IWX_STA_SLEEP_STATE_PS_POLL:
|
|
* @IWX_STA_SLEEP_STATE_UAPSD:
|
|
* @IWX_STA_SLEEP_STATE_MOREDATA: set more-data bit on
|
|
* (last) released frame
|
|
*/
|
|
#define IWX_STA_SLEEP_STATE_AWAKE 0
|
|
#define IWX_STA_SLEEP_STATE_PS_POLL (1 << 0)
|
|
#define IWX_STA_SLEEP_STATE_UAPSD (1 << 1)
|
|
#define IWX_STA_SLEEP_STATE_MOREDATA (1 << 2)
|
|
|
|
/* STA ID and color bits definitions */
|
|
#define IWX_STA_ID_SEED (0x0f)
|
|
#define IWX_STA_ID_POS (0)
|
|
#define IWX_STA_ID_MSK (IWX_STA_ID_SEED << IWX_STA_ID_POS)
|
|
|
|
#define IWX_STA_COLOR_SEED (0x7)
|
|
#define IWX_STA_COLOR_POS (4)
|
|
#define IWX_STA_COLOR_MSK (IWX_STA_COLOR_SEED << IWX_STA_COLOR_POS)
|
|
|
|
#define IWX_STA_ID_N_COLOR_GET_COLOR(id_n_color) \
|
|
(((id_n_color) & IWX_STA_COLOR_MSK) >> IWX_STA_COLOR_POS)
|
|
#define IWX_STA_ID_N_COLOR_GET_ID(id_n_color) \
|
|
(((id_n_color) & IWX_STA_ID_MSK) >> IWX_STA_ID_POS)
|
|
|
|
#define IWX_STA_KEY_MAX_NUM (16)
|
|
#define IWX_STA_KEY_IDX_INVALID (0xff)
|
|
#define IWX_STA_KEY_MAX_DATA_KEY_NUM (4)
|
|
#define IWX_MAX_GLOBAL_KEYS (4)
|
|
#define IWX_STA_KEY_LEN_WEP40 (5)
|
|
#define IWX_STA_KEY_LEN_WEP104 (13)
|
|
|
|
/**
|
|
* struct iwx_keyinfo - key information
|
|
* @key_flags: type %iwx_sta_key_flag
|
|
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
|
|
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
|
|
* @key_offset: key offset in the fw's key table
|
|
* @key: 16-byte unicast decryption key
|
|
* @tx_secur_seq_cnt: initial RSC / PN needed for replay check
|
|
* @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only
|
|
* @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only
|
|
*/
|
|
struct iwx_keyinfo {
|
|
uint16_t key_flags;
|
|
uint8_t tkip_rx_tsc_byte2;
|
|
uint8_t reserved1;
|
|
uint16_t tkip_rx_ttak[5];
|
|
uint8_t key_offset;
|
|
uint8_t reserved2;
|
|
uint8_t key[16];
|
|
uint64_t tx_secur_seq_cnt;
|
|
uint64_t hw_tkip_mic_rx_key;
|
|
uint64_t hw_tkip_mic_tx_key;
|
|
} __packed;
|
|
|
|
#define IWX_ADD_STA_STATUS_MASK 0xFF
|
|
#define IWX_ADD_STA_BAID_VALID_MASK 0x8000
|
|
#define IWX_ADD_STA_BAID_MASK 0x7F00
|
|
#define IWX_ADD_STA_BAID_SHIFT 8
|
|
|
|
/**
|
|
* struct iwx_add_sta_cmd - Add/modify a station in the fw's sta table.
|
|
* ( REPLY_ADD_STA = 0x18 )
|
|
* @add_modify: see &enum iwl_sta_mode
|
|
* @awake_acs: ACs to transmit data on while station is sleeping (for U-APSD)
|
|
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
|
|
* AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
|
|
* @mac_id_n_color: the Mac context this station belongs to,
|
|
* see &enum iwl_ctxt_id_and_color
|
|
* @addr: station's MAC address
|
|
* @reserved2: reserved
|
|
* @sta_id: index of station in uCode's station table
|
|
* @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
|
|
* alone. 1 - modify, 0 - don't change.
|
|
* @reserved3: reserved
|
|
* @station_flags: look at &enum iwl_sta_flags
|
|
* @station_flags_msk: what of %station_flags have changed,
|
|
* also &enum iwl_sta_flags
|
|
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
|
|
* Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
|
|
* add_immediate_ba_ssn.
|
|
* @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
|
|
* Set %STA_MODIFY_REMOVE_BA_TID to use this field
|
|
* @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
|
|
* add_immediate_ba_tid.
|
|
* @sleep_tx_count: number of packets to transmit to station even though it is
|
|
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
|
|
* keeps track of STA sleep state.
|
|
* @station_type: type of this station. See &enum iwl_sta_type.
|
|
* @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
|
|
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
|
|
* mac-addr.
|
|
* @beamform_flags: beam forming controls
|
|
* @tfd_queue_msk: tfd queues used by this station.
|
|
* Obsolete for new TX API (9 and above).
|
|
* @rx_ba_window: aggregation window size
|
|
* @sp_length: the size of the SP in actual number of frames
|
|
* @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver
|
|
* enabled ACs.
|
|
*
|
|
* The device contains an internal table of per-station information, with info
|
|
* on security keys, aggregation parameters, and Tx rates for initial Tx
|
|
* attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD).
|
|
*
|
|
* ADD_STA sets up the table entry for one station, either creating a new
|
|
* entry, or modifying a pre-existing one.
|
|
*/
|
|
struct iwx_add_sta_cmd {
|
|
uint8_t add_modify;
|
|
uint8_t awake_acs;
|
|
uint16_t tid_disable_tx;
|
|
uint32_t mac_id_n_color;
|
|
uint8_t addr[ETHER_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
|
|
uint16_t reserved2;
|
|
uint8_t sta_id;
|
|
uint8_t modify_mask;
|
|
uint16_t reserved3;
|
|
uint32_t station_flags;
|
|
uint32_t station_flags_msk;
|
|
uint8_t add_immediate_ba_tid;
|
|
uint8_t remove_immediate_ba_tid;
|
|
uint16_t add_immediate_ba_ssn;
|
|
uint16_t sleep_tx_count;
|
|
uint8_t sleep_state_flags;
|
|
uint8_t station_type;
|
|
uint16_t assoc_id;
|
|
uint16_t beamform_flags;
|
|
uint32_t tfd_queue_msk;
|
|
uint16_t rx_ba_window;
|
|
uint8_t sp_length;
|
|
uint8_t uapsd_acs;
|
|
} __packed; /* ADD_STA_CMD_API_S_VER_10 */
|
|
|
|
/**
|
|
* FW station types
|
|
* ( REPLY_ADD_STA = 0x18 )
|
|
* @IWX_STA_LINK: Link station - normal RX and TX traffic.
|
|
* @IWX_STA_GENERAL_PURPOSE: General purpose. In AP mode used for beacons
|
|
* and probe responses.
|
|
* @IWX_STA_MULTICAST: multicast traffic,
|
|
* @IWX_STA_TDLS_LINK: TDLS link station
|
|
* @IWX_STA_AUX_ACTIVITY: auxiliary station (scan, ROC and so on).
|
|
*/
|
|
#define IWX_STA_LINK 0
|
|
#define IWX_STA_GENERAL_PURPOSE 1
|
|
#define IWX_STA_MULTICAST 2
|
|
#define IWX_STA_TDLS_LINK 3
|
|
#define IWX_STA_AUX_ACTIVITY 4
|
|
|
|
/**
|
|
* struct iwx_add_sta_key_common - add/modify sta key common part
|
|
* ( REPLY_ADD_STA_KEY = 0x17 )
|
|
* @sta_id: index of station in uCode's station table
|
|
* @key_offset: key offset in key storage
|
|
* @key_flags: IWX_STA_KEY_FLG_*
|
|
* @key: key material data
|
|
* @rx_secur_seq_cnt: RX security sequence counter for the key
|
|
*/
|
|
struct iwx_add_sta_key_common {
|
|
uint8_t sta_id;
|
|
uint8_t key_offset;
|
|
uint16_t key_flags;
|
|
uint8_t key[32];
|
|
uint8_t rx_secur_seq_cnt[16];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct iwx_add_sta_key_cmd_v1 - add/modify sta key
|
|
* @common: see &struct iwx_add_sta_key_common
|
|
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
|
|
* @reserved: reserved
|
|
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
|
|
*/
|
|
struct iwx_add_sta_key_cmd_v1 {
|
|
struct iwx_add_sta_key_common common;
|
|
uint8_t tkip_rx_tsc_byte2;
|
|
uint8_t reserved;
|
|
uint16_t tkip_rx_ttak[5];
|
|
} __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_add_sta_key_cmd - add/modify sta key
|
|
* @common: see &struct iwx_add_sta_key_common
|
|
* @rx_mic_key: TKIP RX unicast or multicast key
|
|
* @tx_mic_key: TKIP TX key
|
|
* @transmit_seq_cnt: TSC, transmit packet number
|
|
*/
|
|
struct iwx_add_sta_key_cmd {
|
|
struct iwx_add_sta_key_common common;
|
|
uint64_t rx_mic_key;
|
|
uint64_t tx_mic_key;
|
|
uint64_t transmit_seq_cnt;
|
|
} __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_2 */
|
|
|
|
/**
|
|
* status in the response to ADD_STA command
|
|
* @IWX_ADD_STA_SUCCESS: operation was executed successfully
|
|
* @IWX_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table
|
|
* @IWX_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session
|
|
* @IWX_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station
|
|
* that doesn't exist.
|
|
*/
|
|
#define IWX_ADD_STA_SUCCESS 0x1
|
|
#define IWX_ADD_STA_STATIONS_OVERLOAD 0x2
|
|
#define IWX_ADD_STA_IMMEDIATE_BA_FAILURE 0x4
|
|
#define IWX_ADD_STA_MODIFY_NON_EXISTING_STA 0x8
|
|
|
|
/**
|
|
* struct iwx_rm_sta_cmd - Add / modify a station in the fw's station table
|
|
* ( IWX_REMOVE_STA = 0x19 )
|
|
* @sta_id: the station id of the station to be removed
|
|
*/
|
|
struct iwx_rm_sta_cmd {
|
|
uint8_t sta_id;
|
|
uint8_t reserved[3];
|
|
} __packed; /* IWX_REMOVE_STA_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* struct iwx_mgmt_mcast_key_cmd
|
|
* ( IWX_MGMT_MCAST_KEY = 0x1f )
|
|
* @ctrl_flags: %iwx_sta_key_flag
|
|
* @IGTK:
|
|
* @K1: IGTK master key
|
|
* @K2: IGTK sub key
|
|
* @sta_id: station ID that support IGTK
|
|
* @key_id:
|
|
* @receive_seq_cnt: initial RSC/PN needed for replay check
|
|
*/
|
|
struct iwx_mgmt_mcast_key_cmd {
|
|
uint32_t ctrl_flags;
|
|
uint8_t IGTK[16];
|
|
uint8_t K1[16];
|
|
uint8_t K2[16];
|
|
uint32_t key_id;
|
|
uint32_t sta_id;
|
|
uint64_t receive_seq_cnt;
|
|
} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */
|
|
|
|
struct iwx_wep_key {
|
|
uint8_t key_index;
|
|
uint8_t key_offset;
|
|
uint16_t reserved1;
|
|
uint8_t key_size;
|
|
uint8_t reserved2[3];
|
|
uint8_t key[16];
|
|
} __packed;
|
|
|
|
struct iwx_wep_key_cmd {
|
|
uint32_t mac_id_n_color;
|
|
uint8_t num_keys;
|
|
uint8_t decryption_type;
|
|
uint8_t flags;
|
|
uint8_t reserved;
|
|
struct iwx_wep_key wep_key[0];
|
|
} __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */
|
|
|
|
/*
|
|
* BT coex
|
|
*/
|
|
|
|
#define IWX_BT_COEX_DISABLE 0x0
|
|
#define IWX_BT_COEX_NW 0x1
|
|
#define IWX_BT_COEX_BT 0x2
|
|
#define IWX_BT_COEX_WIFI 0x3
|
|
/* BT_COEX_MODES_E */
|
|
|
|
#define IWX_BT_COEX_MPLUT_ENABLED (1 << 0)
|
|
#define IWX_BT_COEX_MPLUT_BOOST_ENABLED (1 << 1)
|
|
#define IWX_BT_COEX_SYNC2SCO_ENABLED (1 << 2)
|
|
#define IWX_BT_COEX_CORUN_ENABLED (1 << 3)
|
|
#define IWX_BT_COEX_HIGH_BAND_RET (1 << 4)
|
|
/* BT_COEX_MODULES_ENABLE_E_VER_1 */
|
|
|
|
/**
|
|
* struct iwx_bt_coex_cmd - bt coex configuration command
|
|
* @mode: enum %iwx_bt_coex_mode
|
|
* @enabled_modules: enum %iwx_bt_coex_enabled_modules
|
|
*
|
|
* The structure is used for the BT_COEX command.
|
|
*/
|
|
struct iwx_bt_coex_cmd {
|
|
uint32_t mode;
|
|
uint32_t enabled_modules;
|
|
} __packed; /* BT_COEX_CMD_API_S_VER_6 */
|
|
|
|
|
|
/*
|
|
* Location Aware Regulatory (LAR) API - MCC updates
|
|
*/
|
|
|
|
/**
|
|
* struct iwx_mcc_update_cmd - Request the device to update geographic
|
|
* regulatory profile according to the given MCC (Mobile Country Code).
|
|
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
|
|
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
|
|
* MCC in the cmd response will be the relevant MCC in the NVM.
|
|
* @mcc: given mobile country code
|
|
* @source_id: the source from where we got the MCC, see IWX_MCC_SOURCE_*
|
|
* @reserved: reserved for alignment
|
|
* @key: integrity key for MCC API OEM testing
|
|
* @reserved2: reserved
|
|
*/
|
|
struct iwx_mcc_update_cmd {
|
|
uint16_t mcc;
|
|
uint8_t source_id;
|
|
uint8_t reserved;
|
|
uint32_t key;
|
|
uint32_t reserved2[5];
|
|
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
|
|
|
|
/**
|
|
* iwx_mcc_update_resp_v3 - response to MCC_UPDATE_CMD.
|
|
* Contains the new channel control profile map, if changed, and the new MCC
|
|
* (mobile country code).
|
|
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
|
|
* @status: see &enum iwx_mcc_update_status
|
|
* @mcc: the new applied MCC
|
|
* @cap: capabilities for all channels which matches the MCC
|
|
* @source_id: the MCC source, see IWX_MCC_SOURCE_*
|
|
* @time: time elapsed from the MCC test start (in 30 seconds TU)
|
|
* @reserved: reserved.
|
|
* @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
|
|
* channels, depending on platform)
|
|
* @channels: channel control data map, DWORD for each channel. Only the first
|
|
* 16bits are used.
|
|
*/
|
|
struct iwx_mcc_update_resp_v3 {
|
|
uint32_t status;
|
|
uint16_t mcc;
|
|
uint8_t cap;
|
|
uint8_t source_id;
|
|
uint16_t time;
|
|
uint16_t geo_info;
|
|
uint32_t n_channels;
|
|
uint32_t channels[0];
|
|
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */
|
|
|
|
/**
|
|
* geographic information.
|
|
* @GEO_NO_INFO: no special info for this geo profile.
|
|
* @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params
|
|
* for the 5 GHz band.
|
|
*/
|
|
#define IWX_GEO_NO_INFO 0
|
|
#define IWX_GEO_WMM_ETSI_5GHZ_INFO (1 << 0)
|
|
|
|
/**
|
|
* struct iwx_mcc_update_resp - response to MCC_UPDATE_CMD.
|
|
* Contains the new channel control profile map, if changed, and the new MCC
|
|
* (mobile country code).
|
|
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
|
|
* @status: see &enum iwl_mcc_update_status
|
|
* @mcc: the new applied MCC
|
|
* @cap: capabilities for all channels which matches the MCC
|
|
* @time: time elapsed from the MCC test start (in units of 30 seconds)
|
|
* @geo_info: geographic specific profile information
|
|
* see IWX_GEO_*
|
|
* @source_id: the MCC source, see IWX_MCC_SOURCE_*
|
|
* @reserved: for four bytes alignment.
|
|
* @n_channels: number of channels in @channels_data.
|
|
* @channels: channel control data map, DWORD for each channel. Only the first
|
|
* 16bits are used.
|
|
*/
|
|
struct iwx_mcc_update_resp {
|
|
uint32_t status;
|
|
uint16_t mcc;
|
|
uint16_t cap;
|
|
uint16_t time;
|
|
uint16_t geo_info;
|
|
uint8_t source_id;
|
|
uint8_t reserved[3];
|
|
uint32_t n_channels;
|
|
uint32_t channels[0];
|
|
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */
|
|
|
|
/**
|
|
* struct iwx_mcc_chub_notif - chub notifies of mcc change
|
|
* (MCC_CHUB_UPDATE_CMD = 0xc9)
|
|
* The Chub (Communication Hub, CommsHUB) is a HW component that connects to
|
|
* the cellular and connectivity cores that gets updates of the mcc, and
|
|
* notifies the ucode directly of any mcc change.
|
|
* The ucode requests the driver to request the device to update geographic
|
|
* regulatory profile according to the given MCC (Mobile Country Code).
|
|
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
|
|
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
|
|
* MCC in the cmd response will be the relevant MCC in the NVM.
|
|
* @mcc: given mobile country code
|
|
* @source_id: identity of the change originator, see IWX_MCC_SOURCE_*
|
|
* @reserved1: reserved for alignment
|
|
*/
|
|
struct iwx_mcc_chub_notif {
|
|
uint16_t mcc;
|
|
uint8_t source_id;
|
|
uint8_t reserved1;
|
|
} __packed; /* LAR_MCC_NOTIFY_S */
|
|
|
|
enum iwx_mcc_update_status {
|
|
IWX_MCC_RESP_NEW_CHAN_PROFILE,
|
|
IWX_MCC_RESP_SAME_CHAN_PROFILE,
|
|
IWX_MCC_RESP_INVALID,
|
|
IWX_MCC_RESP_NVM_DISABLED,
|
|
IWX_MCC_RESP_ILLEGAL,
|
|
IWX_MCC_RESP_LOW_PRIORITY,
|
|
IWX_MCC_RESP_TEST_MODE_ACTIVE,
|
|
IWX_MCC_RESP_TEST_MODE_NOT_ACTIVE,
|
|
IWX_MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
|
|
};
|
|
|
|
#define IWX_MCC_SOURCE_OLD_FW 0
|
|
#define IWX_MCC_SOURCE_ME 1
|
|
#define IWX_MCC_SOURCE_BIOS 2
|
|
#define IWX_MCC_SOURCE_3G_LTE_HOST 3
|
|
#define IWX_MCC_SOURCE_3G_LTE_DEVICE 4
|
|
#define IWX_MCC_SOURCE_WIFI 5
|
|
#define IWX_MCC_SOURCE_RESERVED 6
|
|
#define IWX_MCC_SOURCE_DEFAULT 7
|
|
#define IWX_MCC_SOURCE_UNINITIALIZED 8
|
|
#define IWX_MCC_SOURCE_MCC_API 9
|
|
#define IWX_MCC_SOURCE_GET_CURRENT 0x10
|
|
#define IWX_MCC_SOURCE_GETTING_MCC_TEST_MODE 0x11
|
|
|
|
/*
|
|
* From Linux commit ab02165ccec4c78162501acedeef1a768acdb811:
|
|
* As the firmware is slowly running out of command IDs and grouping of
|
|
* commands is desirable anyway, the firmware is extending the command
|
|
* header from 4 bytes to 8 bytes to introduce a group (in place of the
|
|
* former flags field, since that's always 0 on commands and thus can
|
|
* be easily used to distinguish between the two).
|
|
*
|
|
* These functions retrieve specific information from the id field in
|
|
* the iwx_host_cmd struct which contains the command id, the group id,
|
|
* and the version of the command.
|
|
*/
|
|
static inline uint8_t
|
|
iwx_cmd_opcode(uint32_t cmdid)
|
|
{
|
|
return cmdid & 0xff;
|
|
}
|
|
|
|
static inline uint8_t
|
|
iwx_cmd_groupid(uint32_t cmdid)
|
|
{
|
|
return ((cmdid & 0Xff00) >> 8);
|
|
}
|
|
|
|
static inline uint8_t
|
|
iwx_cmd_version(uint32_t cmdid)
|
|
{
|
|
return ((cmdid & 0xff0000) >> 16);
|
|
}
|
|
|
|
static inline uint32_t
|
|
iwx_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version)
|
|
{
|
|
return opcode + (groupid << 8) + (version << 16);
|
|
}
|
|
|
|
/* make uint16_t wide id out of uint8_t group and opcode */
|
|
#define IWX_WIDE_ID(grp, opcode) ((grp << 8) | opcode)
|
|
|
|
struct iwx_cmd_header {
|
|
uint8_t code;
|
|
uint8_t flags;
|
|
uint8_t idx;
|
|
uint8_t qid;
|
|
} __packed;
|
|
|
|
struct iwx_cmd_header_wide {
|
|
uint8_t opcode;
|
|
uint8_t group_id;
|
|
uint8_t idx;
|
|
uint8_t qid;
|
|
uint16_t length;
|
|
uint8_t reserved;
|
|
uint8_t version;
|
|
} __packed;
|
|
|
|
#define IWX_POWER_SCHEME_CAM 1
|
|
#define IWX_POWER_SCHEME_BPS 2
|
|
#define IWX_POWER_SCHEME_LP 3
|
|
|
|
#define IWX_DEF_CMD_PAYLOAD_SIZE 320
|
|
#define IWX_MAX_CMD_PAYLOAD_SIZE (4096 - sizeof(struct iwx_cmd_header_wide))
|
|
#define IWX_CMD_FAILED_MSK 0x40
|
|
|
|
/**
|
|
* struct iwx_device_cmd
|
|
*
|
|
* For allocation of the command and tx queues, this establishes the overall
|
|
* size of the largest command we send to uCode, except for commands that
|
|
* aren't fully copied and use other TFD space.
|
|
*/
|
|
struct iwx_device_cmd {
|
|
union {
|
|
struct {
|
|
struct iwx_cmd_header hdr;
|
|
uint8_t data[IWX_DEF_CMD_PAYLOAD_SIZE];
|
|
};
|
|
struct {
|
|
struct iwx_cmd_header_wide hdr_wide;
|
|
uint8_t data_wide[IWX_DEF_CMD_PAYLOAD_SIZE -
|
|
sizeof(struct iwx_cmd_header_wide) +
|
|
sizeof(struct iwx_cmd_header)];
|
|
};
|
|
};
|
|
} __packed;
|
|
|
|
struct iwx_rx_packet {
|
|
/*
|
|
* The first 4 bytes of the RX frame header contain both the RX frame
|
|
* size and some flags.
|
|
* Bit fields:
|
|
* 31: flag flush RB request
|
|
* 30: flag ignore TC (terminal counter) request
|
|
* 29: flag fast IRQ request
|
|
* 28-26: Reserved
|
|
* 25: Offload enabled
|
|
* 24: RPF enabled
|
|
* 23: RSS enabled
|
|
* 22: Checksum enabled
|
|
* 21-16: RX queue
|
|
* 15-14: Reserved
|
|
* 13-00: RX frame size
|
|
*/
|
|
uint32_t len_n_flags;
|
|
struct iwx_cmd_header hdr;
|
|
uint8_t data[];
|
|
} __packed;
|
|
|
|
#define IWX_FH_RSCSR_FRAME_SIZE_MSK 0x00003fff
|
|
#define IWX_FH_RSCSR_FRAME_INVALID 0x55550000
|
|
#define IWX_FH_RSCSR_FRAME_ALIGN 0x40
|
|
#define IWX_FH_RSCSR_RPA_EN (1 << 25)
|
|
#define IWX_FH_RSCSR_RADA_EN (1 << 26)
|
|
#define IWX_FH_RSCSR_RXQ_POS 16
|
|
#define IWX_FH_RSCSR_RXQ_MASK 0x3F0000
|
|
|
|
static uint32_t
|
|
iwx_rx_packet_len(const struct iwx_rx_packet *pkt)
|
|
{
|
|
|
|
return le32toh(pkt->len_n_flags) & IWX_FH_RSCSR_FRAME_SIZE_MSK;
|
|
}
|
|
|
|
static uint32_t
|
|
iwx_rx_packet_payload_len(const struct iwx_rx_packet *pkt)
|
|
{
|
|
|
|
return iwx_rx_packet_len(pkt) - sizeof(pkt->hdr);
|
|
}
|
|
|
|
|
|
#define IWX_MIN_DBM -100
|
|
#define IWX_MAX_DBM -33 /* realistic guess */
|
|
|
|
#define IWX_READ(sc, reg) \
|
|
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
|
|
|
|
#define IWX_WRITE(sc, reg, val) \
|
|
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
|
|
|
|
#define IWX_WRITE_1(sc, reg, val) \
|
|
bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val))
|
|
|
|
#define IWX_SETBITS(sc, reg, mask) \
|
|
IWX_WRITE(sc, reg, IWX_READ(sc, reg) | (mask))
|
|
|
|
#define IWX_CLRBITS(sc, reg, mask) \
|
|
IWX_WRITE(sc, reg, IWX_READ(sc, reg) & ~(mask))
|
|
|
|
#define IWX_BARRIER_WRITE(sc) \
|
|
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \
|
|
BUS_SPACE_BARRIER_WRITE)
|
|
|
|
#define IWX_BARRIER_READ_WRITE(sc) \
|
|
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \
|
|
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)
|