SecBSD/ports
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
ports/lang/python/python.port.mk

394 lines
13 KiB
Makefile
Raw Permalink Blame History

# python.port.mk - This file is in the public domain.
# Xavier Santolaria <xavier@santolaria.net>
# Stuart Henderson <stu@spacehopper.org>
CATEGORIES += lang/python
# define the default versions
MODPY_DEFAULT_VERSION_2 = 2.7
MODPY_DEFAULT_VERSION_3 = 3.12
MODPY_VERSION ?= ${MODPY_DEFAULT_VERSION_3}
# If switching to a new MODPY_DEFAULT_VERSION_3, say 3.x to 3.y:
# - All ports with PLISTs that depend on the Python version number
# must be REVISION-bumped.
# - Keep xenocara/share/mk/bsd.xorg.mk PYTHON_VERSION in sync.
# verify if MODPY_VERSION found is correct
.if ${MODPY_VERSION} == "2.7"
_MODPY_SUBDIR = 2.7
.elif ${MODPY_VERSION} == "3.12"
_MODPY_SUBDIR = 3
.else
ERRORS += "Fatal: unknown or unsupported MODPY_VERSION: ${MODPY_VERSION}"
.endif
MODPY_WANTLIB = python${MODPY_VERSION}
MODPY_RUN_DEPENDS = lang/python/${_MODPY_SUBDIR}
MODPY_LIB_DEPENDS = lang/python/${_MODPY_SUBDIR}
_MODPY_BUILD_DEPENDS = lang/python/${_MODPY_SUBDIR}
MODPY_TKINTER_DEPENDS = lang/python/${_MODPY_SUBDIR},-tkinter
MODPY_MAJOR_VERSION = ${MODPY_VERSION:R}
.if ${MODPY_MAJOR_VERSION} == 2
MODPY_PY_PREFIX = py-
MODPY_PYCACHE =
MODPY_PYC_MAGIC_TAG =
MODPY_COMMENT = "@comment "
MODPY_ABI3SO =
MODPY_PYOEXTENSION = pyo
.elif ${MODPY_MAJOR_VERSION} == 3
# replace py- prefix with py3-
FULLPKGNAME ?= ${PKGNAME:S/^py-/py3-/}${FLAVOR_EXT}
MODPY_PY_PREFIX = py3-
MODPY_PYCACHE = __pycache__/
MODPY_MAJORMINOR = ${MODPY_VERSION:C/\.//g}
MODPY_PYC_MAGIC_TAG = cpython-${MODPY_MAJORMINOR}.
MODPY_COMMENT =
MODPY_ABI3SO = .abi3
MODPY_PYOEXTENSION ?= opt-1.pyc
.endif
MODPY_SETUPTOOLS ?=
MODPY_SETUPUTILS ?=
MODPY_PYBUILD ?= No
MODPY_PI ?=
# If MODPY_PYTEST_ARGS are set, or if using MODPY_PYBUILD, it implies that
# we want MODPY_PYTEST = Yes
MODPY_PYTEST_ARGS ?=
.if empty(MODPY_PYTEST_ARGS) && ${MODPY_PYBUILD:L} == no
MODPY_PYTEST ?= No
.else
MODPY_PYTEST ?= Yes
.endif
.if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_DEPENDS = ${RUN_DEPENDS}
MODPY_TEST_DEPENDS += devel/py-test
.else
MODPY_TEST_DEPENDS = ${MODPY_RUN_DEPENDS}
.endif
.if ${NO_BUILD:L} == "no"
MODPY_BUILDDEP ?= Yes
.else
MODPY_BUILDDEP ?= No
.endif
MODPY_RUNDEP ?= Yes
.if ${NO_TEST:L} == "no"
MODPY_TESTDEP ?= Yes
.else
MODPY_TESTDEP ?= No
.endif
.if ${MODPY_BUILDDEP:L} == "yes"
BUILD_DEPENDS += ${_MODPY_BUILD_DEPENDS}
.endif
.if ${MODPY_RUNDEP:L} == "yes"
RUN_DEPENDS += ${MODPY_RUN_DEPENDS}
.endif
.if ${MODPY_TESTDEP:L} == "yes"
TEST_DEPENDS += ${MODPY_TEST_DEPENDS}
.endif
_MODPY_PRE_BUILD_STEPS = :
.if ${MODPY_PYBUILD:L} == "no" && ${MODPY_MAJOR_VERSION} != 2
# not necessarily an error, but try to draw attention to it. defer printing
# the warning to fake-install where it's less likely to scroll off the screen.
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
grep -q ^build-backend ${WRKSRC}/pyproject.toml; then \
(echo; echo '*** Ports with pyproject.toml should normally use MODPY_PYBUILD'; \
grep -H ^build-backend ${WRKSRC}/pyproject.toml; echo ) >> \
${WRKDIR}/.modpy-warn; \
fi
.endif
_MODPY_USE_CARGO = No
.if ${MODPY_SETUPTOOLS:L} == "yes"
. if ${MODPY_PYBUILD:L} != "no"
ERRORS += "Fatal: both MODPY_PYBUILD and MODPY_SETUPTOOLS are set. Just use MODPY_PYBUILD."
. endif
# For Python 2, setuptools provides a package locator that is required at
# runtime for pkg_resources to work, so an RDEP is needed.
# For Python 3, pkg_resources is deprecated - Python core has similar
# functionality in importlib.metadata.
# If a py3 port still needs pkg_resources, expect deprecation warnings
# at runtime, and in that case an RDEP on setuptools should be added
# manually.
. if ${MODPY_MAJOR_VERSION} == 2
MODPY_SETUPUTILS_DEPEND ?= devel/py2-setuptools
MODPY_RUN_DEPENDS += ${MODPY_SETUPUTILS_DEPEND}
. else
MODPY_SETUPUTILS_DEPEND ?= devel/py-setuptools
. endif
BUILD_DEPENDS += ${MODPY_SETUPUTILS_DEPEND}
MODPY_SETUPUTILS = Yes
# The setuptools uses test target
TEST_TARGET ?= test
_MODPY_USERBASE =
_MODPY_PRE_BUILD_STEPS += ;${MODPY_CMD} egg_info || true
.elif ${MODPY_PYBUILD:L} != no
BUILD_DEPENDS += devel/py-build \
devel/py-installer
. if ${MODPY_PYBUILD} == flit
BUILD_DEPENDS += devel/py-flit
. elif ${MODPY_PYBUILD} == flit_core
BUILD_DEPENDS += devel/py-flit_core
. elif ${MODPY_PYBUILD} == flit_scm
BUILD_DEPENDS += devel/py-flit_scm
. elif ${MODPY_PYBUILD} == hatch-vcs
BUILD_DEPENDS += devel/py-hatch-vcs
_MODPY_EXPECTED_BACKEND = hatchling
. elif ${MODPY_PYBUILD} == hatchling
BUILD_DEPENDS += devel/py-hatchling
. elif ${MODPY_PYBUILD} == jupyter_packaging
BUILD_DEPENDS += devel/py-jupyter_packaging
_MODPY_EXPECTED_BACKEND = setuptools
. elif ${MODPY_PYBUILD} == maturin
BUILD_DEPENDS += devel/maturin
MODCARGO_CARGO_BIN = maturin
_MODPY_WHEELSDIR = target/wheels
_MODPY_USE_CARGO = Yes
. elif ${MODPY_PYBUILD} == mesonpy
BUILD_DEPENDS += devel/meson-python
. elif ${MODPY_PYBUILD} == pbr
BUILD_DEPENDS += devel/py-pbr \
devel/py-setuptools \
devel/py-wheel
. elif ${MODPY_PYBUILD} == pdm
BUILD_DEPENDS += devel/py-pdm-backend
. elif ${MODPY_PYBUILD} == poetry-core
BUILD_DEPENDS += devel/py-poetry-core
_MODPY_EXPECTED_BACKEND = poetry.core
. elif ${MODPY_PYBUILD} == setuptools || \
${MODPY_PYBUILD} == setuptools_scm || \
${MODPY_PYBUILD} == setuptools-rust
BUILD_DEPENDS += devel/py-setuptools \
devel/py-wheel
_MODPY_EXPECTED_BACKEND = setuptools
. if ${MODPY_PYBUILD} == setuptools_scm
BUILD_DEPENDS += devel/py-setuptools_scm
. elif ${MODPY_PYBUILD} == setuptools-rust
BUILD_DEPENDS += devel/py-setuptools-rust
_MODPY_USE_CARGO = Yes
. endif
. elif !${MODPY_PYBUILD:L:Mother}
ERRORS += "Fatal: unknown MODPY_PYBUILD value (flit, flit_core, flit_scm, hatch-vcs, hatchling, jupyter_packaging, pbr, pdm, maturin, mesonpy, other, poetry-core, setuptools, setuptools_scm, setuptools-rust)"
. endif
_MODPY_EXPECTED_BACKEND ?= ${MODPY_PYBUILD}
_MODPY_WHEELSDIR ?= dist
. if ${_MODPY_USE_CARGO:L} == yes
MODCARGO_INSTALL ?= No
MODCARGO_TEST ?= No
MODULES += devel/cargo
. endif
.else
MODPY_SETUPUTILS = No
# Detect the case where a port is capable of building with setup.py
# via fallback to distutils, but should use py-build instead.
_MODPY_SETUPUTILS_FAKE_DIR = \
${WRKDIR}/lib/python${MODPY_VERSION}/site-packages/setuptools
_MODPY_PRE_BUILD_STEPS += \
;mkdir -p ${_MODPY_SETUPUTILS_FAKE_DIR} \
;exec 3>&1 \
;exec >${_MODPY_SETUPUTILS_FAKE_DIR}/__init__.py \
;echo 'def setup(*args, **kwargs):' \
;echo ' msg = "SecBSD ports: use MODPY_PYBUILD"' \
;echo ' raise Exception(msg)' \
;echo 'Extension = Feature = find_packages = setup' \
;exec 1>&3
_MODPY_USERBASE = ${WRKDIR}
.endif
# XXX If we run into too many problems with setuptools ports and junking
# XXX then this can be enabled, however if a "nojunk" port fails to build,
# XXX DPB will no longer junk on that node, likely resulting in running
# XXX out of disk space in /usr/local. So far it has only happened very
# XXX occasionally and a single port failure is easier to clean up, and
# XXX setuptools use is decreasing, so trying to avoid this!
#
#.if ${MODPY_SETUPTOOLS:L} == "yes" || ${MODPY_PYBUILD:Msetuptools*}
# Setuptools opportunistically picks up plugins. If it picks one up that
# uses finalize_distribution_options (usually setuptools_scm), junking
# that plugin will cause failure at the end of build.
# In the absence of a targetted means of disabling this, use a big hammer:
#DPB_PROPERTIES += nojunk
#.endif
.if ${MODPY_PI:L} == "yes"
_MODPY_EGG_NAME = ${DISTNAME:S/-${MODPY_DISTV}//}
MODPY_PI_DIR ?= ${DISTNAME:C/^([a-zA-Z0-9]).*/\1/}/${_MODPY_EGG_NAME}
SITES = ${SITE_PYPI:=${MODPY_PI_DIR}/}
HOMEPAGE ?= https://pypi.python.org/pypi/${_MODPY_EGG_NAME}
.endif
MODPY_BIN = ${LOCALBASE}/bin/python${MODPY_VERSION}
MODPY_INCDIR = ${LOCALBASE}/include/python${MODPY_VERSION}
MODPY_LIBDIR = ${LOCALBASE}/lib/python${MODPY_VERSION}
MODPY_SITEPKG = ${MODPY_LIBDIR}/site-packages
# usually setup.py but Setup.py can be found too
MODPY_SETUP ?= setup.py
# build or build_ext are commonly used
MODPY_DISTUTILS_BUILD ?= build --build-base=${WRKBUILD}
.if ${MODPY_SETUPUTILS:L} == "yes"
MODPY_DISTUTILS_INSTALL ?= install --prefix=${TRUEPREFIX} \
--root=${DESTDIR} \
--single-version-externally-managed
.else
MODPY_DISTUTILS_INSTALL ?= install --prefix=${TRUEPREFIX} \
--root=${DESTDIR}
.endif
MAKE_ENV += CC=${CC} PYTHONUSERBASE=${_MODPY_USERBASE}
CONFIGURE_ENV += PYTHON="${MODPY_BIN}"
.if ${CONFIGURE_STYLE:Mgnu}
CONFIGURE_ENV += ac_cv_prog_PYTHON="${MODPY_BIN}" \
ac_cv_path_PYTHON="${MODPY_BIN}"
.endif
_MODPY_RUNBIN = cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MODPY_BIN}
MODPY_CMD = cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} \
${MODPY_BIN} ./${MODPY_SETUP} \
${MODPY_SETUP_ARGS}
MODPY_TEST_DIR ?= ${WRKSRC}
MODPY_TEST_CMD = cd ${MODPY_TEST_DIR} && ${SETENV} ${ALL_TEST_ENV} ${MODPY_BIN}
.if ${MODPY_PYTEST:L} == "yes"
MODPY_PYTEST_USERARGS ?=
MODPY_TEST_CMD += -m pytest ${MODPY_PYTEST_USERARGS}
MODPY_TEST_LIBDIR ?= ${WRKINST}${MODPY_SITEPKG}:${WRKSRC}/build/lib:${WRKSRC}/build/lib.openbsd-${OSREV}-${ARCH}-cpython-${MODPY_MAJORMINOR}:${WRKSRC}/lib.openbsd-${OSREV}-${ARCH}-${MODPY_VERSION}
.else
MODPY_TEST_CMD += ./${MODPY_SETUP} ${MODPY_SETUP_ARGS}
.endif
MODPY_TEST_LIBDIR ?=
MODPY_TEST_LOCALE ?= LC_CTYPE=en_US.UTF-8
TEST_ENV += ${MODPY_TEST_LOCALE}
.if !empty(MODPY_TEST_LIBDIR)
TEST_ENV += PYTHONPATH=${MODPY_TEST_LIBDIR}:lib:src
.endif
SUBST_VARS := MODPY_PYCACHE MODPY_COMMENT MODPY_ABI3SO MODPY_PYC_MAGIC_TAG \
MODPY_BIN MODPY_DISTV MODPY_VERSION \
MODPY_PY_PREFIX MODPY_PYOEXTENSION ${SUBST_VARS}
UPDATE_PLIST_ARGS += -S MODPY_PYOEXTENSION \
-I MODPY_ABI3SO -c MODPY_COMMENT -I MODPY_PYCACHE
# set MODPY_BIN for executable scripts
MODPY_BIN_ADJ = perl -pi \
-e '$$. == 1 && s|^.*env +python.*$$|\#!${MODPY_BIN}|;' \
-e '$$. == 1 && s|^.*bin/python.*$$|\#!${MODPY_BIN}|;' \
-e 'close ARGV if eof;' --
MODPY_ADJ_FILES ?=
.if !empty(MODPY_ADJ_FILES)
MODPYTHON_pre-configure += cd ${WRKSRC} && ${MODPY_BIN_ADJ} ${MODPY_ADJ_FILES}
.endif
.if ${MODPY_VERSION} == ${MODPY_DEFAULT_VERSION_2}
MODPY_COMPILEALL = ${MODPY_BIN} -m compileall
.else
MODPY_COMPILEALL = ${MODPY_BIN} -m compileall -j ${MAKE_JOBS} -s ${WRKINST} -o 0 -o 1
.endif
MODPY_TEST_TARGET =
MODPY_TEST_LINK_SO ?= No
.if ${MODPY_TEST_LINK_SO:L} == "yes" && !empty(MODPY_TEST_LIBDIR)
MODPY_TEST_SO_CMD = for _dir in ${MODPY_TEST_LIBDIR:S,:, ,g}; do \
if [ -d $${_dir} ]; then \
cd $${_dir} && \
find . -name '*.so' -type f \
-exec ln -sf $${_dir}/{} ${WRKSRC}/{} \; ;\
fi; done
MODPY_TEST_TARGET += ${MODPY_TEST_SO_CMD};
.endif
.if ${MODPY_PYBUILD:L} != no
. if ! ${MODPY_PYBUILD:Msetuptools_scm}
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
grep -q '^requires.*setuptools[-_]scm' ${WRKSRC}/pyproject.toml; then \
(echo; echo '*** Port may need MODPY_PYBUILD=setuptools_scm'; \
grep -H -e ^build-backend -e '^requires.*setuptools' \
${WRKSRC}/pyproject.toml; echo ) >> ${WRKDIR}/.modpy-warn; \
fi
. endif
. if ${_MODPY_EXPECTED_BACKEND} != other
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
grep '^build-backend' ${WRKSRC}/pyproject.toml | \
grep -qv ${_MODPY_EXPECTED_BACKEND}; then \
(echo; echo '*** Check MODPY_PYBUILD setting (currently "${MODPY_PYBUILD}")'; \
grep -H ^build-backend ${WRKSRC}/pyproject.toml; echo ) >> \
${WRKDIR}/.modpy-warn; \
fi
. endif
MODPY_PYBUILD_ARGS ?=
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
${_MODPY_RUNBIN} -sBm build -w --no-isolation ${MODPY_PYBUILD_ARGS}
MODPY_INSTALL_TARGET = \
${INSTALL_DATA_DIR} ${WRKINST}${MODPY_LIBDIR}; \
${_MODPY_RUNBIN} -m installer -d ${WRKINST} ${WRKSRC}/${_MODPY_WHEELSDIR}/*.whl
MODPY_TEST_TARGET += ${MODPY_TEST_CMD}
. if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET += ${MODPY_PYTEST_ARGS}
. endif
.else
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS}
MODPY_INSTALL_TARGET = \
${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS} \
${MODPY_DISTUTILS_INSTALL} ${MODPY_DISTUTILS_INSTALLARGS}
MODPY_TEST_TARGET += ${MODPY_TEST_CMD}
. if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET += ${MODPY_PYTEST_ARGS}
. elif ${MODPY_SETUPUTILS:L} == "yes"
MODPY_TEST_TARGET += ${TEST_TARGET}
. endif
.endif
MODPY_INSTALL_TARGET += ; if [ -r ${WRKDIR}/.modpy-warn ]; then cat ${WRKDIR}/.modpy-warn; fi
.if empty(CONFIGURE_STYLE)
. if !target(do-configure) && ${_MODPY_USE_CARGO:L} == yes
do-configure:
@${MODCARGO_configure}
. endif
. if !target(do-build)
do-build:
. if ${_MODPY_USE_CARGO:L} == yes
@${MODCARGO_BUILD_TARGET}
. endif
. if ${MODPY_PYBUILD} != maturin
@${MODPY_BUILD_TARGET}
. endif
. endif
# extra documentation or scripts should be installed via post-install
. if !target(do-install)
do-install:
@${MODPY_INSTALL_TARGET}
. endif
. if !target(do-test) && \
(${MODPY_SETUPUTILS:L} == "yes" || ${MODPY_PYTEST:L} == "yes")
do-test:
@${MODPY_TEST_TARGET}
. endif
.endif
Reference in a new issue View git blame Copy permalink